User manual YAMAHA CBX-K2

[. . . ] SPECIAL MESSAGE SECTION (U. S. A. ) This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. [. . . ] When this is set to 0 or "oFF"(initial touch on), Touch sensitivity can be set in the Group B . When the Assignable Wheel or Slider is set to Velocity(157), this is inactive. This determines the RPN (Registered Parameter Number) controller for the Assignable Wheel. The message must include both MSB and LSB values. This determines the Controller number for the Assignable Wheel. Though not all are listed on the panel, any of the standard Control Change numbers (0 - 119) can be assigned. (For a complete list of the available controllers and their numbers, see on page 30. ) This determines the controller by using NRPN ( Non-Registered Parameter Number) for the Assignable Wheel. Refer to the Controller list on page 30. The message must include both MSB and LSB values. This determines the drum number for use with the Wheel and the assigned drum-related control number (136 - 151). The following alternate operation can also be used: C + F [note number (of desired drum sound)] L This lowers the key transposition by the specified amount (in semitones). This raises the key transposition by the specified amount (in semitones). This determines the RPN (Registered Parameter Number) controller for the Assignable Slider. The message must include both MSB and LSB values. This determines the Controller number for the Assignable Slider. Though not all are listed on the panel, any of the standard Control Change numbers (0-119) can be assigned. (For a complete list of the available controllers and their numbers, see on page 30. ) This determines the NRPN (Non-Registered Parameter Number) controller for the Assignable Slider. The message must include both MSB and LSB values. (Refer to the Controller list on page 30. ) This determines the drum number for use with the Slider and the assigned drum-related control number (136 - 151). The following alternate operation can also be used: C + F [note number (of desired drum sound)] L Changes the LED display to show the currently selected program number. Changes the LED display to show the currently selected Bank Select MSB value. Changes the LED display to show the currently selected Bank Select LSB value. Range (Hexadecimal Default in parentheses) setting 0, 20-300(0, 14-12C) MSB:000-127(00-7F) LSB:000-127(00-7F) 1-128(1-80) 0(oFF) MSB:000 LSB:000 1 MIDI Code <<FC>> <<FB>> <<FA>> <<F8>> <<Bn 00 msb, Bn 20 LSB, Cn pp>> <<Cn pp>> Notes *2 *2 *2 *2, *4 *5, *7 *6, *7 - - <<F0 7E 7F 09 01 F7>> *8 - - <<Bn 78 00>> <<F0 43 1s 4C 00 00 7E 00 F7>> *8 on, oFF on - *9 1-16(1-10) 0, 1-127(0, 1-7F) 1 0(oFF) - *3 MSB:000-127(00-7F) LSB:000-127(00-7F) 0-158(0-9E) 1 <<Bn 64 LSB, Bn 65 MSB, Bn 06 vv>> Refer to the Controller list on page 30. [. . . ] Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. 16-28, Jalan SS 2/72, Petaling Jaya, Selangor, Malaysia Tel: 3-717-8977 BRASIL Yamaha Musical do Brasil LTDA. Reboucas 2636, São Paulo, Brasil Tel: 011-853-1377 PHILIPPINES Yupangco Music Corporation 339 Gil J. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 ARGENTINA Yamaha Music Argentina S. A. [. . . ]