User manual YAMAHA CBX-K3

[. . . ] SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. [. . . ] Tempo entry for sequencer/rhythm machine. Setting to 0 disables the MIDI clock transmission. When Assignable Wheel or Slider is set to Tempo (158), this is inactive. This allows selection of voice banks on tone generators that support multiple banks. This message must include both MSB and LSB values. Transmits the selected program change number. Stepping up or down through program numbers is also possible by holding down C and using the N/ M buttons (page 16). This resets the connected tone generator to GM operation. Caution: Be careful when using this, since it automatically changes whatever settings you've made on the tone generator. (Only GM compatible tone generators respond to this message. ) This turns all sounds off over the current MIDI channels. To turn all sounds off for all MIDI channel, use All Sounds Off in Group B. Though not all are listed on the panel, any of the standard Control Change numbers (0-119) can be assigned. (For a complete list of the available controllers and their numbers, see on page 30. ) This determines the NRPN (Non-Registered Parameter Number) controller for the Assignable Slider. The message must include both MSB and LSB values. (Refer to the Controller list on page 30. ) This determines the drum number for use with the Slider and the assigned drum-related control number (136 - 151). The following alternate operation can also be used: C + F [note number (of desired drum sound)] L Changes the LED display to show the currently selected program number. Changes the LED display to show the currently selected Bank Select MSB value. Changes the LED display to show the currently selected Bank Select LSB value. Range (Hexadecimal Default in parentheses) setting 0, 20-300(0, 14-12C) MSB:000-127(00-7F) LSB:000-127(00-7F) 1-128(1-80) 0(oFF) MSB:000 LSB:000 1 MIDI Code <<FC>> <<FB>> <<FA>> <<F8>> <<Bn 00 msb, Bn 20 LSB, Cn pp>> <<Cn pp>> Notes *2 *2 *2 *2, *4 *5, *7 *6, *7 - - <<F0 7E 7F 09 01 F7>> *8 - - <<Bn 78 00>> <<F0 43 1s 4C 00 00 7E 00 F7>> *8 on, oFF on - *9 1-16(1-10) 0, 1-127(0, 1-7F) 1 0(oFF) - *3 MSB:000-127(00-7F) LSB:000-127(00-7F) 0-158(0-9E) 1 <<Bn 64 LSB, Bn 65 MSB, Bn 06 vv>> Refer to the Controller list on page 30. Refer to the Controller list on page 30. <<Bn 62 LSB, Bn 63 MSB, Bn 06 vv>> Refer to the Controller list on page 30. - *5, *10 *10 MSB:000-127(00-7F) LSB:000-127(00-7F) 0-127(00-7F) - *5, *10 0 0-12(0-C) 0-12(0-C) MSB:000-127(00-7F) LSB:000-127(00-7F) 0-158(0-9E) 0 0 6 <<Bn 64 lsb, Bn 65 msb, Bn 06 vv>> Refer to the Controller list on page 30. Refer to the Controller list on page 30. [. . . ] 4, Jakarta 12930, Indonesia Tel: 21-520-2577 PORTUGAL Valentim de Carvalho CI SA Estrada de Porto Salvo, Paço de Arcos 2780 Oeiras, Portugal Tel: 01-443-3398/4030/1823 CENTRAL & SOUTH AMERICA MEXICO Yamaha de Mexico S. A. De C. V. , Departamento de ventas Javier Rojo Gomez No. 1149, Col. Tel: 686-00-33 KOREA Cosmos Corporation #131-31, Neung-Dong, Sungdong-Ku, Seoul Korea Tel: 02-466-0021~5 GREECE Philippe Nakas S. A. Navarinou Street 13, P. Code 10680, Athens, Greece Tel: 01-364-7111 SWEDEN Yamaha Scandinavia AB J. [. . . ]