User manual YAMAHA CDR-HD1300

[. . . ] UAB CDR-HD1300 CDR-HD1300E HDD/CD Recorder Enregistreur CD/Disque Dur MULTI JOG PUSH ENTER TEXT/TIME MODE MENU TRACK NO. COMPLETE CLEAR BOOKMARK DIGITAL REC LEVEL INPUT REC FINALIZE ERASE OPTICAL COAXIAL ANALOG ANALOG REC LEVEL MIN MAX OWNER'S MANUAL MODE D'EMPLOI IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 2 3 4 5 6 7 8 9 Read these instructions. [. . . ] · The track title for the first track is effective for the combined track. · If there is any track that cannot be copied digitally among the tracks to be combined, the combined track cannot be copied digitally either. · When tracks with different emphasis status have been combined, the emphasis status of the first track becomes effective for the combined track. 001 1L dB ­30 ­10 ­6 2 TRACK ­2 0 R Track to be the first in the combination Track to be the last in the combination Press CLEAR to cancel the confirmed selection. English E-45 TRACK EDITING Track Divide You can divide a track into two at the selected point. 6. Set the dividing point by rotating the MULTI JOG knob (pressing +/­ on the remote control). The dividing point can be set by "minute: second: frame". Move the flash to the unit to be set by pressing t/e or r/y. If you stop rotating the MULTI JOG knob, this unit searches for the dividing point according to the setting made, and starts repeated playback of the passage between the dividing point and the point that is 5 seconds after the dividing point. Dividing point Track GROUP I Editing during the stop mode 1. Select and confirm "Track Divide" in step 5 of "Editing during the stop mode" on page 39. The following message appears on the display. Disc that contains the track to be divided Divide 001 1? L dB ­30 ­10 ­6 ­2 0 R Passage to be repeatedly played Track to be divided 7. Press COMPLETE. The selected track is divided into two at the set dividing point. This unit returns to the editing menu item selection. The disc number that contains the track to be divided flashes. 2. Select the disc that contains the track to be divided by rotating the MULTI JOG knob (pressing +/­ on the remote control). I Editing during playback 3. Press the MULTI JOG knob (ENTER on the remote control) to confirm the disc that contains the track to be divided. The number of the track to be divided flashes. Press CLEAR to cancel the confirmed selection. 1. Select and confirm "Track Divide" in step 2 of "Editing during playback" on page 39. The track being played is confirmed to be divided. The passage between the dividing point (the timing you press MENU) and the point that is 5 seconds after the dividing point is repeatedly played. The following message appears on the display. Dividing point 4. Select the track to be divided by rotating the MULTI JOG knob (pressing +/­ on the remote control). 5. Press the MULTI JOG knob (ENTER on the remote control) to confirm the track to be divided. The passage between the temporary dividing point (the point that is 10 seconds elapsed from the beginning of the track) and the point that is 5 seconds after the temporary dividing point is repeatedly played. [. . . ] Pull out the HDD tray. · Be careful not to hook the IDE cable and the power cable over the HDD tray. · Do not apply the excessive force on the HDD tray. 3. Place the HDD on the HDD tray. Plastic shunt The HDD is set to slave by setting the plastic shunt at the second position from right of the jumper switch. Example: When setting the ST340810A model · HDD is a very sensitive device. [. . . ]