User manual YAMAHA CLP-810S

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA CLP-810S. We hope that this YAMAHA CLP-810S user guide will be useful to you.

Lastmanuals help download the user guide YAMAHA CLP-810S.


Mode d'emploi YAMAHA CLP-810S
Download

You may also download the following manuals related to this product:

   YAMAHA CLP-810S (383 ko)

Manual abstract: user guide YAMAHA CLP-810S

Detailed instructions for use are in the User's Guide.

[. . . ] IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local Control should be turned OFF when recording using the DOU-10 voices only, and ON when recording the Clavinova voices while listening to playback of the DOU10 voices. MIDI OUT MIDI IN DOU-10 Clavinova ZSimultaneously press and hold the A-1 and C#0 keys. XPress the C6 key to switch the Local Control between OFF and ON. CRelease the A-1 and C#0 keys. NOTE · When the power is initially turned ON, Local Control is set to "ON". C6 A-1 C#0 CLP-810S 13 Troubleshooting If you encounter what appears to be a malfunction, please check the following points before assuming that your Clavinova is faulty. No Sound When the Power is Turned ON Is the AC plug properly connected to the Clavinova and an AC wall outlet?Is the MASTER VOLUME control turned up to a reasonable listening level?Also make sure that a pair of headphones is not plugged into the PHONES jack, and the Local Control (page 13) is ON. The Damper Pedal Doesn't Work If the damper pedal doesn't work, or notes are sustained even when the pedal is not pressed, make sure that the pedal cord is properly plugged into the main unit (page 22). The Clavinova Reproduces Radio or TV Sound This can occur if there is a high-power transmitter in your vicinity. Intermittent Static Noise This is usually due to turning ON or OFF a household appliance or other electronic equipment which is fed by the same AC mains line as your Clavinova. Interference Appears On Radio or TV Sets Located Near the Clavinova The Clavinova contains digital circuitry which can generate radio-frequency noise. The solution is to move the Clavinova further away from the affected equipment, or vice versa. Options & Expander Modules q Options BC-8 Bench A comfortable bench styled to match your Yamaha Clavinova. HPE-160 Stereo Headphones High-performance lightweight dynamic headphones with extra-soft ear pads. KC-883 Key Cover A convenient way to keep your keyboard clean and dust-free. q Expander Modules DOU-10 Disk Orchestra Unit A range of MIDI recording and playback functions, plus Yamaha DOC software, Disklavier PianoSoftTM, and General MIDI/Standard MIDI File disk playback capability. CLP-810S 14 MIDI Data Format If you're already very familiar with MIDI, or are using a computer to control your music hardware with computer-generated MIDI messages, the data provided in this section can help you to control the Clavinova. 1. NOTE ON/OFF Data format: [9nH] -> [kk] -> [vv] 9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8)* vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H) (3) Local Control (reception only) ccH 7AH Parameter Local Control Data Range (vvH) 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the damper pedal will continue to sound until the pedal is released. Data format: [8nH] -> [kk] -> [vv] (reception only) 8nH = Note OFF event (n = channel number) kk = Note number: 00H ~ 7FH = C-2 ~ G8 vv = Velocity * If received value exceeds the supported range for the selected voice, the note is adjusted by the necessary number of octaves. (5) Omni Off (reception only) ccH 7CH Parameter Omni Off Data Range (vvH) 00H 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] BnH = Control change (n = channel number) cc = Control number vv = Data Range Same processing as for All Notes Off. (6) Omni On (reception only) ccH 7DH Parameter Omni On Data Range (vvH) 00H Same processing as for All Notes Off. (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H. . . 7FH Bank selection processing does not occur until receipt of next Program Change message. (7) Mono (reception only) ccH 7EH Parameter Mono Data Range (vvH) 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. (2) Main Volume (reception only) ccH 07H ccH 0BH ccH 40H ccH 43H Parameter Volume MSB Parameter Expression MSB Parameter Damper MSB Parameter Soft Pedal Data Range (vvH) 00H. . . 7FH Data Range (vvH) 00H. . . 7FH Data Range (vvH) 00H. . . 7FH Data Range (vvH) 00H-3FH:off, 40H-7FH:on (3) Expression (4) Damper · When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. · The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received. (5) Soft Pedal 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number Program change number Vioce Bank MSB Bank LSB Program Change Number PIANO 0 112 0 PIANO (Variation) 0 113 0 (6) Effect1 Depth ( Reverb Send Level ) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H. . . 7FH Adjusts the reverb send level. 3 MODE MESSAGES Data format: [BnH] -> [cc] -> [vv] BnH = Control event (n = channel number) cc = Control number vv = Data Range 5. SYSTEM REALTIME MESSAGES Active sensing [FEH] · Transmitted every 200 milliseconds. [. . . ] Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. 16-28, Jalan SS 2/72, Petaling Jaya, Selangor, Malaysia Tel: 3-717-8977 BRASIL Yamaha Musical do Brasil LTDA. Reboucas 2636, São Paulo, Brasil Tel: 011-853-1377 PHILIPPINES Yupangco Music Corporation 339 Gil J. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 ARGENTINA Yamaha Music Argentina S. A. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA CLP-810S

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA CLP-810S will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag