User manual YAMAHA CRW-F1UX

[. . . ] (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Address: Telephone: Fax: Type of Equipment: Model Name: Yamaha Electronics Corporation, USA. 6660 Orangethorpe Avenue Buena Park, CA 90620 714-522-9105 714-670-0108 CD Recordable/Rewritable Drive CRW-F1UX This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. FCC INFORMATION (U. S. A. ) 1. [. . . ] YAMAHA CD-R/RW Drive website URL: http://www. yamaha. co. jp/english/product/computer/ Note For information about where to find an EHCI compliant driver for the USB 2. 0 interface card or information about operating systems supporting the card, refer to the card manufacturer's website or contact the manufacturer. Connecting the drive to a USB port with USB 1. 1 specifications When the CRW-F1UX drive is connected to a USB 1. 1-compliant port on the computer, the drive operates with USB 1. 1 specifications. For secure data writing, activate Buffer Underrun Protection and set the writing speed to 8X for a CD-R disc or 10X for a CD-RW disc with the writing software. The actual writing/rewriting speed is approximately 6X. The data reading speed is up to 6X. 10 USB cable The USB standard for maximum length of cable between devices is five meters. The length of the included USB cable is one meter. CRW-F1UX drive Maximum length of cable between devices: 5. 0 m Operating system Windows 98 Second Edition, Windows Me, Windows 2000 Professional, Windows XP (Home Edition/Professional Edition) CD writing software The CRW-F1UX drive requires CD writing software to write onto a CD-R/RW disc. Use the CD writing software that supports the CRW-F1UX drive. For details about installing and using the CD writing software, refer to the instruction for it. 11 Preparing the CRW-F1UX Drive Serial Number The serial number, printed on the label on the bottom of your CRW-F1UX drive, is required when you have a question about the drive or need user support services. Please write the serial number down in the space below. It may be difficult to check the serial number after setting up the drive or for any other reason. Serial number (10 characters: 3 letters + 7 numbers) Serial Number 12 Note Place the CRW-F1UX drive horizontally. 1 Connect the CRW-F1UX Drive 1 2 Remove all additional USB devices connected to the computer, and turn on the computer. Be sure that the power switch of the CRW-F1UX drive is turned off (STANDBY). 13 Preparing the CRW-F1UX Drive 3 Connect the included USB cable to the CRW-F1UX drive. The included USB cable has two types of plugs: Series A plug and Series B plug. Series A plug Series B plug Insert the Series B plug (with a quadratic section) of the included USB cable to the USB port of the CRW-F1UX drive. USB cable (included) USB port Series B plug 4 Connect the included AC adapter to the DC-IN connector of the CRW-F1UX drive. DC-IN connector 14 5 Connect the included power cable to the AC adapter (). Connect the other end of the power cable to the wall socket (). Power cable (included) Note · Use the included AC adapter only. · The AC adapter may become warm during use under normal conditions. · The AC adapter consumes 1 W of power while connected to the wall socket even if the power switch of the CRW-F1UX drive is turned off. Remove the power cable from the wall socket when not using the CRW-F1UX drive for a prolonged period. 15 Preparing the CRW-F1UX Drive 6 Turn on the power switch of the CRW-F1UX drive. Lights Note When turning on the CRW-F1UX drive, be sure that the power LED lights. 3) 7 Connect the included USB cable to the computer. Connect the Series A plug (with a rectangular section) of the included USB cable to the USB port of the USB interface card. USB port USB cable (included) Series A plug 16 Note · The CRW-F1UX drive needs to be connected to the USB port on the computer. The drive connected to the computer via a USB hub may not operate properly. · When the CRW-F1UX drive is connected to a USB 1. 1-compliant port on the computer, the drive operates with USB 1. 1 specifications. 10) 2 Install the Device Drivers Installation of the device drivers starts automatically when the CRW-F1UX drive is connected to the computer. The device drivers need to be installed only once when first installing the device. For Windows XP/2000 Professional/Me The device drivers of the operating system standard are installed automatically. For Windows 98 Second Edition Install the device drivers with the included CD-ROM "CRW-F1 SOFTWARE DISC. " For details, refer to the separate manual "Windows 98 Second Edition USB CDROM Device Driver Installation Guide" for the CRW-F1UX drive. [. . . ] This method divides a track into small segments called "packets" so that data can be written on a packet-by-packet basis, which means that you can write data in much the same way as you copy data to a floppy or hard drive. Since the data can be written easily, packet writing is proper to daily data backup. Packet writing also enables you to add packets to a disc as long as there is free space available on the disc. Note · Discs need to be formatted for packet writing prior to use. [. . . ]