User manual YAMAHA CVP-405-403-401

[. . . ] CVP-405 / 403 /401 OWNER'S MANUAL Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] When playing back a Song and a Style at the same time, we recommend that you use the Preset Songs in the "Sing-a-long" folder. 1 2 3 4 5 6 Select a Song (page 35). Press the STYLE CONTROL [ACMP ON/OFF] button to turn on the Auto Accompaniment function. Press the STYLE CONTROL [SYNC START] button to enable standby-- letting you simultaneously start the accompaniment as soon as you start playing. Press the SONG [PLAY/PAUSE] button to start playback. The chord name is indicated in the Main display. To return to the Main display, press the [DIRECT ACCESS] button, then press the [EXIT] button. If the Song data does not contain this data, the current chord name will not be displayed in the Main display during Song playback. Using, Creating and Editing Songs When the Song playback is stopped, the style playback is also stopped at the same time. · Tempo for playing back a Song and a style at the same time When playing back a Song and a Style at the same time, the tempo value set in the Song is automatically used. Playing Songs with the Quick Start function With the default settings, the Quick Start function is turned on. On some commercially available Song data, certain settings related to the Song (such as voice selection, volume, etc. ) are recorded to the first measure, before the actual note data. When Quick Start is set to "ON, " the instrument reads all initial non-note data of the Song at the highest possible speed, then automatically slows down to the appropriate tempo at the first note. This allows you to start playback as quickly as possible, with a minimum pause for reading of data. When Quick Start is set to "ON, " a Song is played back directly from the first note (which may be in the middle of a measure). If you want to play from the beginning of the measure that has silence prior to the first note, turn Quick Start "OFF. " 1 Call up the operation display. [FUNCTION] [B] SONG SETTING 2 Press the [7] (QUICK START) button to turn the Quick Start "OFF. " CVP-405/403/401 Owner's Manual 135 Adjusting the Volume Balance and Voice Combination, etc. (MIXING CONSOLE) Reading Song data automatically when connecting a USB storage device You can have the instrument automatically call up the first Song (not contained in a folder) on a USB storage device, as soon as the device is connected in the [USB TO DEVICE] terminal. [FUNCTION] [J] UTILITY TAB [][®] MEDIA 2 Press the [3]/[4] (SONG AUTO OPEN) button to select "ON". Adjusting the Volume Balance and Voice Combination, etc. (MIXING CONSOLE) About the [SONG CH 1­8]/ [SONG CH 9­16] displays A Song consists of 16 separate channels. Separate settings can be made for each of the 16 channels in the MIXING CONSOLE display. Adjust the parameters in the SONG CH 1­8 or SONG CH 9­16 display respectively. Usually, CH 1 is assigned to the [TRACK 1] button, CH 2 is assigned to the [TRACK 2] button, and CH 3­16 are assigned to the [EXTRA TRACKS] button, respectively. You can set the mixing-related parameters of a Song. Refer to the section "Adjustable items (parameters) in the MIXING CONSOLE display" on page 89. Call up the "SONG CH 1­8" or "SONG CH 9­16" display in step 3 of the Basic Procedure in "Editing the Volume Balance and Voice Combination (MIXING CONSOLE)" on page 87. [. . . ] Nusantik Gedung Yamaha Music Center, Jalan Jend. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S. A. 09300, México, D. F. , México Tel: 55-5804-0600 SPAIN/PORTUGAL Yamaha-Hazen Música, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 KOREA Yamaha Music Korea Ltd. [. . . ]