User manual YAMAHA CVP-509

[. . . ] CVP-509 / 505 / 503 / 501 Owner's Manual Thank you for purchasing this Yamaha Clavinova! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place for future reference. Before using the instrument, be sure to read "PRECAUTIONS" on pages 6-7. IMPORTANT --Check your power supply-- Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. [. . . ] Plays through the selected file repeatedly. Continues playback through all the files in the folder containing the current file repeatedly. Randomly and repeatedly plays back all files in the folder containing the current file. CVP-509/505/503/501 Owner's Manual 85 USB Audio (CVP-509/505/503) ­ Playback and Recording Audio Files ­ · Adjusting volume for audio playback Press the [7 ] (VOL. ) button then adjust the volume for audio files by using the [7 ] buttons. To close the setting display, press the [8 ] (CLOSE) button. 7 Recording Your Performance as Audio CVP-509 CVP-505 CVP-503 CVP-501 Try recording your performance as audio data (WAV file) to a USB flash memory. For example, you can record an ensemble performance of guitar and keyboard together or record yourself singing along with song playback by connecting a guitar, microphone or other device to the instrument. The maximum amount of recording time is 80 minutes per recording, though this may differ depending on the capacity of the particular USB flash memory. · Internal tone generator of the instrument. Keyboard parts (Right 1, Right 2, Left), Song parts, Style parts. · Input from a microphone, guitar or other instrument (via the [MIC. /LINE IN] jack). · Input from another audio device, such as a CD player, MP3 player or the like (via the [MIC. /LINE IN] jack). The recorded data using this function is saved as: · Stereo WAV data · 44. 1 kHz sample rate/16 bit resolution NOTE To record your performance by USB Audio function, use the compatible USB flash memory. Before using a USB flash memory, be sure to read "Connecting a USB Storage Device" on page 106. NOTE Input from the [AUX IN] jacks cannot be recorded. NOTE Songs protected by copyright, such as preset songs, and the metronome sound cannot be recorded. Moreover, the iAFC effect (CVP-509 only; page 34) does not affect the recording. NOTE 1 2 Connect the USB flash memory to the [USB TO DEVICE] terminal. which you want to use for your performance. (For information setting the Voice, see page 37; for setting the Style, see page 48; for connecting a microphone, see page 102. ) Press the [USB] button. Recording methods on the instrument include MIDI recording as well as audio recording (page 65). 7 USB Audio (CVP-509/505/503) ­ Playback and Recording Audio Files ­ 3 4 Press the [E] (RECORDER) button to call up the Recording display (USB AUDIO RECORDER display). NOTE The USB storage device of "USB1" is selected as the recording destination when multiple USB storage devices are connected. The destination is skipped when "USB1" is a floppy disk drive. 86 CVP-509/505/503/501 Owner's Manual Check the information of the USB flash memory as a recording destination On the display of step 4, press the [E] (PROPERTY) button to check the number of the USB flash memory device, memory size of the device, available recording space on the device, and available time for recording. Press the [F] (OK)/[EXIT] button to close the PROPERTY display. 5 Start recording by pressing the [J] (REC) button, then start your performance. When recording begins, the elapsed recording time is shown on the right side of the Recording display. CAUTION Never attempt to disconnect the USB flash memory or turn the power off during playback. Doing so may corrupt the USB flash memory data or the recording data. 6 NOTE The recording operation continues, even if you close the Recording display by pushing the [EXIT] button. Press the [E] (RECORDER) button to call up the Recording display again, then stop the recording by pressing the [J] (STOP) button. CVP-509/505/503/501 Owner's Manual 87 USB Audio (CVP-509/505/503) ­ Playback and Recording Audio Files ­ Stop recording by pressing the [J] (STOP) button. The file name is automatically named, and a message indicating the file name is displayed. NOTE 7 Even if you make a mistake in your performance, you cannot overwrite an existing file. Delete the recorded file on the File Selection display, then record your performance again. Mixing Console ­ Editing the Volume and Tonal Balance ­ The Mixing Console gives you intuitive control over aspects of the keyboard parts and Song/Style channels, including volume balance and the timbre of the sounds. It lets you adjust the levels and stereo position (pan) of each Voice to set the optimum balance and stereo image, and lets you set how the effects are applied. Mixing Console ­ Editing the Volume and Tonal Balance ­ Basic Procedure 1 Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE display. 2 2 8 E Use the TAB [E][F] buttons to call up the desired page. For details about each display Page, refer to the Reference Manual on the website. · VOL/VOICE Changes the Voice for each part and adjusts panning and volume for each part (page 90). [. . . ] Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDIA Yamaha Music India Pvt. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S. A. 09300, México, D. F. , México Tel: 55-5804-0600 SPAIN/PORTUGAL Yamaha Música Ibérica, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 INDONESIA PT. [. . . ]