User manual YAMAHA D-2B

[. . . ] If you must use an extension cord, the minimum wire size for a 25' cord (or less ) is 18 AWG. NOTE: The smaller the AWG number , the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. [. . . ] Use the Cursor [M] or [N] button to call up another page. D-2B Owner's Manual 91 Sampling mode Chain mode Pressing this button toggles the bypass status of the Chorus Effect between on and off. When Bypass is turned off (the BYPASS indication is shown with white text in black), the Chorus Effect is applied to the Drum Kit sound. When Bypass is turned on (the BYPASS indication is shown with black text in white), the Chorus Effect is not applied to the Drum Kit sound. Utility mode F [SF5] BYPASS File mode Trigger mode Click mode C Preset Song mode Drum Kit mode Reference 3 21 5 4 Reference Drum Kit Mode [DRUM KIT] Pad Settings Assigning a Function to the Pad Controller [SF1] PADCTRL voice Reference Drum Kit mode Song mode Click mode Trigger mode File mode Utility mode Chain mode Sampling mode [F5] PAD Turning the Pad Controller sets the snappy on/ off status or sets the Snares On/Off parameters in the display called up via the [DRUM KIT] [F5] PAD [SF2] SNARES. Turning the Pad Controller to the left (counterclockwise) unlocks the snappy effect, or sets the Snares On/Off parameters to off. Turning the Pad Controller to the right (clockwise) locks the snappy effect, or sets the Snares On/Off parameters to on. From this display, you can assign a function to the Pad Controller with which the TP100 and TP120SD are equipped. 2 1 NOTE · The initial default setting of the Pad Controller Type differs depending on the Drum Kit. · The available value above differs depending on the selected Trigger Input jack. For example, "snares" and "voice" are available only when the INPUT (Trigger Input jack) is set to "snare. " 3 C [SF6] Input Lock You can turn the Input Lock on or off by pressing this button. When the Input Lock is turned on (the [L] indicator appears at the top right of the display), the Trigger Input jack 1 cannot be changed even if you hit any pad. This function is useful when you want to adjust the parameters of the current pad (connected to the current Trigger Input jack) while hitting other pads. 1 INPUT (Trigger Input jack) Determines the Trigger Input jack (equivalent to the connected pad) to be edited. Note that this parameter can be set only for each Trigger Input jack. Settings snare, tom1, tom2, tom3, tom4, ride, crash1, crash2, hihat, kick, pad11, pad12, pad13, pad14, pad15 B Pad Controller Type Determines the function assigned to the Pad Controller of the pad connected to the Trigger Input jack specified at 1. Settings off, snares, tuning, tempo, filter, voice Snappy Settings [SF2] SNARES off snares tuning tempo filter No function is assigned to the Pad Controller. Turning the Pad Controller adjusts how strongly or softly the snappy parameter is "stretched, " or adjusts the Snares On/Off and Snares Adjust parameters in the display called up via the [DRUM KIT] [F5] PAD [SF2] SNARES. Keep in mind that only a single Song can play back from all the Pad Songs for which the Mode parameter is set to "cutoff. " Settings play, chase, cutoff C Snare Buzz Determines whether or not the snappy effect resonates with the Kick or Tom sound. When set to on, the snappy effect resonates with the Kick or Tom sound. Settings off, 1 ­ 5 Pad Song Settings [SF3] PADSONG F [SF5] INFO (Information) Pressing this button calls up the display which indicates the Pad Song settings. 1 23 4 6 5 1 SOURCE (Trigger Input Source) Determines the Trigger Input Source to which you want to assign the Pad Song. You can change the Trigger Input Source by hitting the corresponding pad when Input Lock is turned off. Settings Refer to the Trigger Input Source List on page 61. NOTE · The Pad Song plays back according to the tempo specified in the Song mode or Click mode. The D-2B has only the single tempo value. · Keep in mind that hitting the pad softly may not start the Pad Song. Make sure to hit the pad more strongly than a specified level. · If both the Pad Function (which can be set in the display called up via the [UTILITY] [F2] PAD [SF2] PADFUNC) and Pad Song are assigned to the Trigger Input Source, the Pad Song setting is canceled. · Depending on the selected Pad Songs and normal Song, an unexpected sound may be produced. This is because each Song may be transmitting different setups to the internal tone generator via the same MIDI channel. If you plan on using two or more Songs together, you should make sure that the MIDI channels used for the Songs are all set to different values. B Pad Song Determines whether or not the Pad Song is assigned to the selected Trigger Input Source. When set to on, the Trigger Input Source can be used to start playback of the Song specified below. [. . . ] Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. [. . . ]