User manual YAMAHA DD-10

[. . . ] This product may also use "household" type batteries. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Mismatches or incorrect installation may result in overheating and battery case rupture. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. [. . . ] In this method, you can hear and select an assigned voice. Turn the DIAL to the right (clockwise), and voice numbers will increase. Turn the DIAL to the left (counter-clockwise), and voice numbers will decrease. See the "Drum Voice List" on page 38. Repeat the previous steps 3 and 4 for any or all of the pads and pedals. 1 20 21 279 1 19 20 21 279 16 DD-65/YDD-60 Owner's Manual Play the Pads/Pedals 5 Save to a Custom kit. CO1 Press the [ASSIGN] button to save to a Custom kit (the lamp will be off). To cancel the saving, simply press the [KIT], [SONG] or [DEMO] button. After you've assigned the voice, the instrument will automatically be set to the assigned custom kit. You can now play the voice you have assigned to the pad/pedal. Setting the Reverb ON/OFF Different depths of the DD-65/YDD-60's reverb effect can be added to the DD-65/YDD-60's overall sound. Lamp is on 1 Press the [REVERB] button. When you press the [REVERB] button the button's lamp lights, and the ambience of a room or concert hall is added to the sound. 2 To turn Reverb off, press the [REVERB] button again. (Make sure that the lamp is not lit. ) Setting the Reverb type 1 Enter the Reverb type setting function. Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the "rbt" item appears. The currently selected Reverb type number appears next to the "rbt" indication. rbt 2 Change the reverb type by turning the DIAL. Reverb type List No. 1 2 3 4 5 Reverb Type Hall 1 Hall 2 Hall 3 Room 1 Room 2 No. (See the "Song List" on page 40. ) U01­U05 can also be used to playback songs you've recorded yourself and/or loaded from computer. Refer to the section "Transferring Song files to and from a connected computer" on page 34 for details. Select one of the songs and listen to it. Selecting and playing a Song 1 Press the [SONG] button. When you press the [SONG] button, the current song number appears in the display. 010 2 Select a Song Number. Use the DIAL to select a song number. Song numbers will increase as the DIAL is turned to the right (clockwise), and decrease as the DIAL is turned to the left (counter-clockwise). (See the "Song List" on page 40. ) NOTE · Song number " 001" is automatically selected whenever the power is turned ON. · With the Auto Kit Select feature turned on, selecting a song will also automatically select the best suited Drum Kit for that song. (See "Setting the Auto Kit Select ON/OFF" on page 24. ) · The complexity of each song can be shown at the Song list. (See the "Song List" on page 40. ) 001 002 100 U01 U05 U01­U05 are User Songs which you've recorded yourself and/or loaded from computer. Note that when you press [START/STOP] button, no sounds are played if there is no data. 3 Press the [START/STOP] button. When you press the [START/STOP] button, a one- or two-measure count-in plays, and the song starts playing. As the song is playing, the Song's current measure will be shown in the display. Try playing the pads and pedals along with the song. [. . . ] Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. [. . . ]