User manual YAMAHA DISKLAVIER GRANTOUCH

[. . . ] (A) Basic Operation Manual Manuel de base Handbuch "Grundlegende Bedienung" GEN E R A L FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. [. . . ] q [STOP] button Used to stop playback and recording. w [REC] button Used to engage the Record Standby mode before recording starts. e [SONG SELECT/REV·FWD] buttons In Stop mode: Used to select songs. In Play mode: Used to fast preview and review. In Pause mode: Used to fast forward and reverse. r PART [L] [R] buttons For L/R and Ensemble songs, these buttons allow you to choose which part to play back or record: L (left-hand) part, R (right-hand) part, or both. The indicators light in green during playback and in red during recording. Press both buttons together to turn pedal playback on or off so that you can play the pedals yourself. t [ENTER] button Used to select and execute functions. y [VOICE] button Used to access the internal XG tone generator when playing the piano. u [<] [>] cursor buttons Used to move the cursor in the display. i [FUNC. ] button Used to access various Disklavier utility functions. o [METRONOME] button Used to access the metronome. p Selector button Used to select the feature you want to adjust from among Volume, Tempo, Tranpose, and Balance. a [­/NO] [+/YES] buttons Used to select options and parameters and to adjust the volume. s LED volume level indicators Indicates the playback volume level. Also functions as a visual metronome. English Chapter 2: Names of Parts and Their Functions 9 Control Unit -- Rear Panel 1 CD CONTROL R 2 L AUDIO/ANALOG MIDI IN OUT TO HOST HOST SELECT PC1 MIDI PC2 MAC TO CONTROL CABLE FOR PIANO MIDI IN 3 4 5 6 7 1 CD CONTROL Used to connect the line from the piano. 2 AUDIO/ANALOG MIDI IN Used to connect audio equipment such as an external CD changer. 3 TO HOST (serial port) Used to connect the Disklavier GranTouch with a personal computer. 4 HOST SELECT Used to select the host computer connected to the TO HOST connector. 5 TO CONTROL CABLE FOR PIANO Used to connect the control cable from the piano. 6 MIDI OUT Used to connect external MIDI equipment for outputting MIDI data. 7 MIDI IN Used to connect external MIDI equipment for inputting MIDI data. 10 Remote Control 6 [SONG SELECT] buttons Used to select songs. 1 RECORD PART SELECT L R SEARCH 0 q w 7 [PLAY] button Used to start playback. 8 [PAUSE] button Used to pause playback and recording. [. . . ] Either the "R" track (right-hand) or the "L" track (left-hand) can be guided, either individually or simultaneously. Both SmartKey and CueTIME disks turn this "Guide" function on automatically. (To use these disks, see "Using a SmartKey Disk" on page 52 and "Using a CueTime Disk" on page 54. ) This feature does not turn on automatically, so if you want to use this feature with other disks (such as "Disk Orchestra Collection" and "You Are The Artist" disks), you will have to turn it on manually as follows. 1 2 Press [FUNC. ]. Press [>] to move the c cursor to the SmartKey option, then press [ENTER]. 3 Press [>] to move the c cursor to the Prompt Repeat option. 4 Use the [­/NO] and [+/YES] buttons to select OFF. Using the Guide Function with "Disk Orchestra Collection" Disks and "You Are The Artist" Disks 1 Insert the disk into the disk drive of the Disklavier GranTouch. 5 Press [FUNC. ]. If you play the CueTIME disk now, no keys will move to indicate "cue keys. " The only way to know which key the Disklavier GranTouch is waiting for is to look in the upper right hand corner of the display. (See "Key notation" on page 54 for a visual reference on cues and their corresponding keys. ) Cue key 2 Press the [SONG SELECT ] buttons to specify the song you wish to play, and open the music book to the same song. 56 3 While holding the [ENTER] button, press either the "L" or "R" [PART] buttons to activate the "Guide" function for that part (note that the orange indicator lights). After performing this operation, the PART indicator show three conditions: State Play Part Cancel Guide Part Indicator Steady green Blinking green Orange Key Prompt "Key Prompt" is the partial movement of a key that doesn't create any sound. [. . . ]