User manual YAMAHA DISKLAVIER MARK IV-V2.00- DISKLAVIER MARK IV ADVANCED OPERATING MANUL

[. . . ] IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT: The wires in mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN and YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK . The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Alleen voor klanten in Nederland Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. The Control Unit is classified as a Class 1 laser product. [. . . ] 1 Show theBack Only the Desired 24 "Playing Piano Part") Left-hand part Right-hand part Key prompt (The key slightly moves downward) [Part] screen 35 CHAPTER 2: Song Playback Features the desired part to change its 2 Tap on (guide, normal play, or mute). setting Each time you tap on the part, its setting changes as follows showing the status with the color of the part icon: until the [Registering] disappear, 3 Waitthen press to start and PianoSmart playback. Note: If [Different CD!] screen appears in step 2, confirm that the CD paired with the selected SmartPiano song is loaded, and then tap on . English Guide (orange) Normal play (green) Mute (white) Video Synchronized Playback Adding Disklavier Accompaniment to Commercial CD Songs (PianoSmart) You can add a Disklavier piano performance provided on SmartPiano software floppy disks to the playback of songs on commercial CDs. Furthermore, once you playback a SmartPiano song to the end, the paired song on the CD is automatically copied to the [CD Library]. This feature eliminates the trouble of changing CDs and enables quick playback later. 1 Perform the video synchronized recording in advance. 45) Note: Be sure to rewind the video cassette to locate the beginning of the recording. video 2 Make sure that theon. 45 synchronization is "Setting Up the Camcorder and the Disklavier") down the 3 Turncamcorder. volume completely on the Note: Although noises (synchronizing signal) are heard from the camcorder's speaker when the volume is not turned down completely, this is not a malfunction. the SmartPiano 1 Selectwith desired( pg. "Quick Guide") When you select a SmartPiano song for the first time, [Please insert the CD. ] screen appears. Tip: It is convenient that you copy the SmartPiano software to the [User Library] in advance. 55 "Making Copies of the Entire Contents in a Medium or Song Library") 4 Start playback on the camcorder. video synchronized playback. The Disklavier automatically selects the song paired with the video, and then starts playback as well. 2 Load a CD paired withifthe SmartPiano software, necessary. ( pg. 20 "Loading a CD"). Note: When you perform PianoSoft playback for the first time, it takes 15 seconds to synchronize the SmartPiano song and the CD with the [Registering] appearing on the screen. Note: You cannot change the playback tempo during Note: When the song paired with the video is stored in [User Library] (songs recorded with Video Synchronized Recording will automatically be stored here) or [PianoSoft Library], the song is automatically selected and starts playback. However, it is required to select the desired song after step 2 when the song is stored in the removable medium. 36 CHAPTER 2: Song Playback Features Copying Song File from a Personal Computer to the Disklavier You can copy song files from a Windows or Macintosh computer to a special folder on the Disklavier called [FromToPC] and then play them on the Disklavier. Note: Copy-protected files, such as demonstration songs, cannot be copied to the [FromToPC] folder. · Do not copy the files other than Disklavier song files. Note: It is necessary to configure the Disklavier properly for network communications by enabling it to get a DHCP IP address automatically (recommended) or by assigning an appropriate address manually. The procedure is the same as the one used for setting up the Disklavier for Internet communications. Please follow the instructions on page 90 for "Setting Up the Disklavier for Internet Connection. " Note: For information about configuring a personal computer for network communications, please refer to the documentation that came with the computer. For Windows I/O Center to a 1 Connect thenetwork) to whichLAN (local area a personal computer with a song file is also connected. 2 On the computer screen, click [Start] and then open [My Network Places]. confirm 3 Open [Dkv******] and is shownthat the [FromToPC] folder under that. Note: [Dkv******] differs depending on the model. I/O Center (right side) Note: The folder or icon name differs depending on the version of your operating system. LAN 4 Copy the desired song files to the [FromToPC] folder. Personal computer 37 CHAPTER 2: Song Playback Features For Mac OS X 10. 3 or later For Windows only In case that you cannot find the [Dkv******] icon 1 Click [Entire Network] under [Other Places] in the left side menu of the [My Network Places] window. 2 Double-click the [Microsoft Windows Network] icon to open it. 3 Double-click the [Dkv] icon to open it. 4 Double-click the [Disklavier ******] icon to open it and confirm that the [From/ToPC] folder is shown under that. 5 Copy the desired song files to the [From/ToPC] folder. In case that you cannot find the [Dkv] icon or [Entire Network] in the left side menu of the [My Network Places] window 1 Tap on on the Pocket Controller. 2 In the dialog that comes up, look for [Dkv******] and memorize it. 3 Enter the address ("\\Dkv******\FromToPC") in the address bar at the top of Explorer (or Internet Explorer browser) on the PC and click [OK]. [. . . ] It intercepts all or designated requests to the real server to see if it can fulfill the requests itself. If not, it forwards the request to the real server. Proxy servers are used to improve performance and speed, and to filter requests, usually for security and to prevent unauthorized access to an internal network. MIDI An acronym for Musical Instrument Digital Interface. MIDI allows electronic musical instruments to communicate with each other. Continue to next page. . . 102 CHAPTER 12: Glossary Quiet Mode A Silent system mode in which sound is output through the speakers, enabling you to freely adjust the volume of the piano. Song Normally, a short piece of music with lyrics. [. . . ]