User manual YAMAHA DISKLAVIER PRO ADVANCED OPERATING MANUAL

[. . . ] IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT: The wires in mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN and YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK . The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. The Control Unit is classified as a Class 1 laser product. One of the labels below or similar is located on the inside of the CD drive unit. [. . . ] G TO CSP terminal Accepts the power cable from the Central Signal Processor (CSP). 6 CHAPTER 1: Getting Started Pocket Controller -- Front -- 1 ME VOLU ! 2 0 TYUI WER Q @ # $ % ­ & ( O De P l D F G ­H + J K L A S Cut = ) B N M , , . ZXCV Copy Paste 3 4 5 6 7 8 9 Caps Num Symbol Fn Tab /? Space ~ `" < . . . > STOP ON/STANDBY PLAY A Touch screen pg. 3 "Tapping with the stylus pen" in "Quick Guide". B Charge indicator (amber) Lights up when the Pocket Controller is being charged. The indicator goes out when charging is completed. C VOLUME ­/+ buttons Adjust the overall volume. D STOP, ON/STANDBY button Stops playback, and turns the Pocket Controller on/ off. G Cursor buttons Selects the item on the touch screen or move the slider on a control bar. H AC adapter jack Accepts the AC adaptor. (Song Select, Fast Reverse/Fast / Forward) buttons Pressing the button selects a song. Holding down the button fast reverses/forwards. (Back) button Returns to the previous screen. K E Select button Executes the selected operation. F I/O port Accepts the terminal on the cradle. L Screen protector Open or remove the protector when you tap on the touch screen. To remove the screen protector, lift it up and fold it back until it comes off. 35 "Entering Characters") 7 CHAPTER 1: Getting Started -- Rear -- English RESET N Security eyelet Accepts an anti-theft cord. O Speaker P Battery compartment lid Q RESET button (located inside of the battery compartment lid) Resets the Pocket Controller. 15 "Preparing the Pocket Controller") -- Top/Left side -- S Stylus pen For operating the touch screen. T CF card slot Holds the CF wireless LAN card. U Stereo headphone jack For future use. V Microphone W IR port For future use. X SD card slot Holds the SD card. 8 CHAPTER 1: Getting Started Cradle ONE C TOU H A AC adaptor jack Accepts the AC adaptor. B I/O port Accepts the I/O port on the Pocket Controller. 81 "Assigning a Specific Function to the ONE TOUCH Button") 9 CHAPTER 1: Getting Started Monitor Speakers* * Only for models supplied with the Monitor speakers. -- Front -- English Note: The location of each unit differs depending on the model. LOW HIGH 1 LINE 2 A Woofer unit B LOW/HIGH volume controls Adjust the base/treble sound volume. [. . . ] 59 "Re-recording an Existing Song as Audio Data") Note: Metronome Mode recording ( pg. 53) and changing the default tempo ( pg. 55) are not available with this recording method. 1 Tap on 2 in the [Main] Screen. To switch the internal voice to record, tap on [Voice], and then on the desired voice. 50 "Ensemble Part Recording and Track Structure") To record only the audio input from the microphone, tap on to cancel the voice recording. [. . . ]