User manual YAMAHA DPX-1000

[. . . ] UCAK DPX­1000 Digital Cinema Projector OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 2 Keep these instructions. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] Also, increase the hUV to give more green to the image, or reduce it to add more magenta. ADJUSTMENT ­100 to 0 to +100 0 to 100 to 200 5000K to 6000K to 10000K (COLOR TEMP. ) ­0. 020UV to ±0. 000 to +0. 020UV (hUV) MENU Color temp. adjustment hUV + ­ English E-17 Menu structure Input signal Video/Component, RGB TV Video/Component, RGB TV Video/Component, RGB TV, RGB PC Menu Item SHARPNESS TYPE Use this parameter to change the filtering characteristics of the circuitry used to sharpen edges in the projected image. SHARPNESS GAIN Adjusts the clearness of the image edges. The lower value creates a softer image with less noise element. COLOR BALANCE S The default setting displays a good balance of colors, which you cannot change. For RGB, this parameter adjusts the color balance and gain for the three primary colors R (red), G (green), and B (Blue). The intermediate colors Y (yellow), C (cyan), and M (magenta) are set automatically based on the RGB and color temperature settings. From the RGB submenu, press the RESET key on the remote control to automatically adjust the RGB setting and based on the color gain and temperature you have just set. For RGBYCM, you should set the color balance and gain for each color separately. From the RGBYCM submenu, press the RESET key on the remote control to automatically adjust the RGB or YCM tone and based on the color gain and temperature you have just set. Refer to the color chart below for further help in adjusting parameters. You can change the background color to black by pressing the key when setting the COLOR COORDINATE. XYZ color system color chart Adjustment range OFF/L/ML/MH/H 0 to 16 to 63 STANDARD/RGB/ RGBYCM Y Green Yellow Red Cyan Magenta Blue X Component, RGB TV, RGB PC Video/Component, RGB TV, RGB PC LEVEL ADJUSTMENT S Adjusts gain and offset for all parameters (Y, CB, CR/R, G, B) of component and RGB signals. (except DVI input) IRIS IRIS set this parameter to STANDARD for viewing bright images on a large screen. Set it to CINEMA if you want to give priority to the deep blacks and high contrast important to home theatre viewing. ­50 to 0 to +50 STANDARD/CINEMA E-18 Menu structure I 2 <SIGNAL> . . . . . . You cannot adjust the parameters below if the unit is not receiving an input signal. Input signal Video/Component, RGB TV, RGB PC Menu Item DISPLAY ASPECT S Sets the aspect ratio to use when projecting an image for a given input signal. Under AUTO mode, the unit will automatically switch to the most suitable mode for display. NORMAL (THROUGH) mode projects the image as is without an alteration to the signal. SQUEEZE displays horizontally compressed images in a normal non-compressed manner. ZOOM projects the image scaled up by a given ratio. [. . . ] 365 W Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 1 W Noise Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 db (Standard mode) 28 db (Economy mode) Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495 (W) x 189. 5 (H) x 465. 4 (D) mm 19"-1/2 (W) x 7"-1/2 (H) x 18"-5/16 (D) inch Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]