User manual YAMAHA DPX-1100

[. . . ] IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 2 Keep these instructions. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] Adjusts the quality of images input from VIDEO jack. Suppresses the rainbow-like color and annoying dots in images. This function is only available for NTSC format signals the unit receives at its composite inputs. Choices: On/Off Reduces noise in analog images. Digital processing eliminates noise in the luminance and color signals from sources with a comparatively large amount of noise, producing a more vivid image. Use when the quality of the source you are viewing requires it. Choices: Off/1/2/3 Select the correct type of device to ensure image synchronization. Select [VCR] when using an analog video tape as a video source. Switches the interlace/progressive (I/P) conversion mode. Change from Interlace/Progressive (I/P) conversion mode to [Auto] or [Video] mode. · [Auto] : Detects the film source automatically and projects it progressively. · [Video] : Turns the detection function off. · [Auto] : Selects the best color space coefficient for the image resolution. · [SDTV] : Color space coefficient for BT. 601 type signal. · [HDTV] : Color space coefficient for BT. 709 type signal. Compensates for differences in the black levels of SDTV images. · For signals equal to the pedestal level : Set to [0%]. · For signals with high levels of blackness : Set to [7. 5%]. % 100 Overscan (Input signal) Video/S-Video/Component/RGB TV 3D Y/C Separation (Input signal) Video(NTSC) Noise Reduction (Input signal) Video/S-Video/Component/RGB TV Video Type (Input signal) Video/S-Video Progressive Mode (Input signal) Video/S-Video/Component/RGB TV Color Space Conversion (Input signal) Video/S-Video/Component Setup Level (SDTV) (Input signal) Video/S-Video/Component/RGB TV 0 PEDESTAL LEVEL BLACK LEVEL 28 Menu items Setup Level (HDTV) (Input signal) Component/RGB TV Compensates for differences in the black levels of HDTV images. · For signals equal to the pedestal level : Set to [0%]. · For signals with high levels of blackness : Set to [7. 5%]. % 100 0 PEDESTAL LEVEL BLACK LEVEL Sync Adjustment (Input signal) RGB PC (except for HDMI signals) Regulates flickering, noise, and disorder in the projected image. Choices: -128 to +127 Tracking (Input signal) RGB PC (except for HDMI signals) Regulates vertical striping in the image. Choices: 0 to 31 Clamp Position (Input signal) Component/RGB TV Adjust the clamp position for analog video sources. [. . . ] It will turn off 2 seconds after the signal has been input. The unit is not able to decode the PC or HDMI signal currently being input. The unit is not able to decode the video signal currently being input. The unit is setting itself to the most appropriate configuration for the RGB signal currently being received. [. . . ]