User manual YAMAHA DPX-1300

[. . . ] G DPX-1300 DIGITAL CINEMA PROJECTOR PROJECTEUR CINEMA NUMERIQUE BEDIENUNGSANLEITUNG Caution: Read this before operating this unit. · To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. · When not planning to use this unit for a long period of time (i. e. vacation), disconnect the AC power plug from the wall outlet. [. . . ] (Input signal) Video/S-Video/Component/RGB TV/RGB PC Adjusts color temperature. Adjusts the level of white in colors between red and blue, and between green and magenta. Increase the color temperature to increase the amount of blue in an image, giving bright color tones. Reduce the color temperature to increase the amount of red, giving a darker, more relaxed atmosphere to the image. Choices: 5, 000 to 10, 000 Color temprature adjustment White Correction (Input signal) Video/S-Video/Component/RGB TV/RGB PC Adjusts hUV. Increasing the hUV setting increases the amount of green in the image. Decreasing this setting increases the amount of magenta. Choices: -0. 02 to +0. 02 hUV English + ­ 31 Menu items Color Adjustment (continued) (Input signal) Video/S-Video/Component/ RGB TV/RGB PC/D4 VIDEO - WRGB Adjusts the color temperature, the color coordinates and gain for the three primary colors, R(Red), G(Green), and B(Blue). The unit sets the complemental colors Y(Yellow), C(Cyan), and M(Magenta) automatically. Adjusting [Color Temp. ] resets the RGB gain based on color coordinate settings. Adjusting [Gain] resets [Color temp. ] based on color coordinate settings. Use the color temperature fixed mode if you want to adjust the RGB coordinates while keeping the color temperature setting unchanged. Refer to " Example: Using the color temperature fixed mode" on page 43 for operation methods. - WRGBYCM Adjusts the color coordinates and gain for each component color individually. When you have selected WRGBYCM in the color adjustment submenu, press RESET to automatically adjust the RGB gain and YCM color balance to the most appropriate setting, based on color temp and RGB color balance settings. y G (Green) 0. 5 W (Color temperature and h UV) R (Red) 0. 0 B (Blue) 0. 0 0. 5 x y G (Green) Y (Yelow) 0. 5 C (Cyan) W (Color temperature and h UV) R (Red) 0. 0 M (Magenta) 0. 0 0. 5 x B (Blue) Choices: White correction : -0. 02 to +0. 02 Color temperature : 5, 000 to 10, 000 Gain : 0. 00 to 1. 99 White Peaking Enhances the brilliance of the white portions of the projected image. Choices: 0 to 5 Iris (Input signal) Video/S-Video/Component/RGB TV/RGB PC Adjusts the iris (Optical). You can select 3 levels. Close Open Level Adjustment (Input signal) Component/RGB TV/RGB PC Adjusts the analog input signal gain and offset settings. Adjust the gain and offset for component and RGB (Y, CB, CR/R, G, B) input signals. Choices: -50 to 0 to +50 (except for HDMI signals) 32 Menu items Signal You can adjust the image when the unit is receiving an input signal. Display Aspect Ratio (Input signal) Video/S-Video/Component/RGB TV/RGB PC Sets the aspect ratio for projecting an image from an input signal. See "Selecting a display aspect for projecting images", page 22. Overscan (Input signal) Video/S-Video/Component/RGB TV Overscans video input sources for display. This parameter is not available when you select [Smart Zoom] in [Display Aspect]. In some cases, noise may appear at the edges of the image when you select [Full]. [. . . ] In such a case, missing or flashing of a few pixels can be found on the screen. These are characteristics of DMDTM , not mechanical problems. 11 Reference English 61 Message display Message No Signal INPUT A (Component) (Example) Out Of Range Unknown Format Auto Sync. . . Memory 1--6 Now Processing The lamps has reached its recommended replacement time. Invalid Operation The color temp is fixed Please wait Condition The unit is not receiving or detecting any signal at the selected input jack. [. . . ]