User manual YAMAHA DSP-1

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA DSP-1. We hope that this YAMAHA DSP-1 user guide will be useful to you.

Lastmanuals help download the user guide YAMAHA DSP-1.


Mode d'emploi YAMAHA DSP-1
Download
Manual abstract: user guide YAMAHA DSP-1

Detailed instructions for use are in the User's Guide.

[. . . ] The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division. WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). [. . . ] For return to the PS menu, press the "PROGRAM " key. 9 K1 : 100K2 : 100 Press the "PROGRAM " key. (See Table 1. ) 9 SI : 0 Turning the "INPUT SELECTOR". SI: Tuner signal sensitivity level For return to the K1/K2 menu, press the "PROGRAM "key. 9 DC : 7 Press the "PROGRAM " key. DC: DC protection value (normal value: 1-13) For return to the SI menu, press the "PROGRAM "key. 9 PS : 30 Press the "PROGRAM " key. PS: Power voltage protection value (normal value: 23-38) For return to the DC menu, press the "PROGRAM "key. For return to the initial display, press the "PROGRAM "key again. Table 1 AD Value 0 15 SET MENU K1 ­ PROGRAM K2 INPUT MODE + NEXT TAPE/MD MON /EXT DECODER 25 35 45 55 65 75 85 EFFECT Cautions: 1. If K1 and K2 are more than ±4% from the reference values, normal operation will not be executed. If DC and PS are outside the normal values, the protection function will operate and power will turn off. 15 DSP-1 No. 10 STATUS INFORMATION FROM DSP The status data from the DSP block is sequentially displayed in a hexadecimal number. 4 PRO LOGIC". High Low 1 0 CPU / 1 0 0 0 0 1 0 CHS / 2 0 0 0 0 10 BI 2 / 1 00 00 10 BI 3 / 2 00 00 10 BI 5 / 1 00 00 [CPU/1] <High Byte> bit7 bit6 bit5 bit4 Mute request fs 000B:Analog 001B:32kHz 010B:44. 1kHz 011B:48kHz 100B:64kHz 101B:88. 2kHz 110B:96kHz 111B:undefined 1 0 CPU / 1 0 0 0 0 10 BI 0 / 1 00 00 10 BI 2 / 2 00 00 10 BI 4 / 1 00 00 10 BI 5 / 2 00 00 1 0 CHS / 2 0 0 0 0 10 BI 0 / 2 00 00 10 BI 3 / 1 00 00 10 BI 4 / 2 00 00 Indicate bit 7654 00 3210 Indicate bit3 bit2 bit1 bit0 acmod 0000B:1+1 0010B:2/0 0100B:2/1 0110B:2/2 1000B:7. 1 0001B:1/0 0011B:3/0 0101B:3/1 0111B:3/2 bit [Note] When acmod is beyond 1000B, it is DTS 7. 1 signal. <Low Byte> bit7 bit6 bit5 bit4 AC-3 DECODE OK DTS DECODE OK Red DTS record (Flashes and lights) 1 for audio other than PCM linear audio bit3 bit2 bit1 bit0 DEM (Demodulator) MUTE (without RF signal) IEC958 digital format error IEC958 commercial-use device bit IEC958 digital data bit [Note] 0 1 2 3 4 5 6 7 8 9 A B C D E F 3 7 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 2 6 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1 5 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 4 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 IEC958: Standard to identify the PCM bit stream signal. Digital format error refers to a digital signal with the sampling frequency undefined (neither 32k, 44. 1k, 48k, 64k, 88. 2k nor 96k). GUARD : OFF TV INPUT : AUTO CBL INPUT : AUTO 18 DSP-1 I AMP ADJUSTMENT Confirmation of Idling Current of Main Amplifier · Right after power is turned on, confirm that the voltage across the terminals of R688(Main Lch), R690(Main Rch), R692(Center), R694(Rear Lch), R696(Rear Rch) are between 0. 1mV and 10. 0mV. · If it exceeds 10. 0mV, open (cut off) R571 (Main Lch), R577 (Main Rch), R583 (Center), R589 (Rear Lch), R595 (Rear Rch) and · reconfirm the voltage. Confirm that the voltage is 0. 20mV ~ 15. 0mV after 60 minutes. 0. 1mV ~ 10. 0mV (DC) R583 Q523 R692 R688(Lch) R690(Rch) R692(Cch) 0. 1mV ~ 10. 0mV (DC) R595 Q525 R696 MAIN (1) R589 R694(RLch) R696(RRch) Q524 R694 Cut off R571(Lch) R577(Rch) R583(Cch) R589(RLch) R595(RRch) Q522 R577 R690 Q521 R571 R688 Note) · If R571, R577, R583, R589 and R595 have already been cut off and idling current does not flow, reconnect R571, R577, R583, POWER (3) R589 and R595. Q521 ~ Q525 are transistors for temperature correction. Apply silicone grease to contact · 19 Front Panel surface with the heat sink. DSP-1 I IC DATA IC501 : M30217MA-A203FP P50/FL08 P51/FL09 P52/FL10 P53/FL11 P54/FL12 P55/FL13 P56/FL14 P57/FL15 P00/FL16 P01/FL17 P02/FL18 P03/FL19 P04/FL20 P05/FL21 P06/FL22 VSS P07/FL23 VCC P10/FL24 P11/FL25 P12/FL26 P13/FL27 P14/FL28 P15/FL29 P16/FL30 P17/FL31 P20/FL32 P21/FL33 P22/FL34 P23/FL35 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 50 49 48 47 46 45 44 43 42 16-bit Microcomputer P67/FL07 P66/FL06 P65/FL05 P64/FL04 P63/FL03 P62/FL02 P61/FL01 P60/FL00 VEE P107/AN7 P106/AN6 P105/AN5 P104/AN4 P103/AN3 P102/AN2 P101/AN1 AVSS P100/AN0 VREF AVCC TOP VIEW 41 40 39 38 37 36 35 34 33 32 31 P24/FL36 P25/FL37 P26/FL38 P27/FL39 P30/FL40 P31/FL41 P32/FL42 P33/FL43 P34/FL44 P35/FL45 P36/FL46 P37/FL47 P40/FL48 P41/FL49 P42/FL50 P43/FL51 P44/FL52 P45/FL53 P46/FL54 P47/FL55 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 P00/FL16~ P07/FL22 77-66, 64 P10/FL24~ P17/FL31 62-55 P97 P96 P95/CK2 P94/SO2 PP93/SI2 P92 P91 P90 CNVSS P87 P86 /RESET XOUT VSS XIN VCC P85/INT5 P84/INT4 P83/INT3 P82/INT2 P81/INT1 P80/INT0 P77 P76/CK1 P76/RX1 P74/TX1 P73 P72 P71 P70 P20/FL32~ P27/FL39 54-47 P30/FL40~ P37/FL47 46-39 P40/FL48~ P47/FL55 38-31 P50/FL08~ P57/FL15 80-73 P60/FL00~ P67/FL07 88-81 P70~P73, P74/TX1, P75/RX1, P80/INT1~ P76/CK1, P85/INT5 P77 P86, P87 30-23 22-17, 11, 10 P90~P92, P93/SI2, P94/SO2, P95/CK2, P96, P97 8-1 P100/AN0~ P107/AN7 98, 96-90 I/O PORT PORT 0 (P00-07) PORT 1 (P10-17) PORT 2 (P20-27) PORT 3 (P30-37) PORT 4 (P40-47) PORT 5 (P50-57) PORT 6 (P60-67) PORT 7 (P70-77) PORT 8 (P80-87) PORT 9 (P90-97) PORT 10 (P100-107) INTERNAL PERIPHERAL FUNCTION TIMER TIMER A0 (16-bit) TIMER A1 (16-bit) TIMER A2 (16-bit) TIMER A3 (16-bit) TIMER A4 (16-bit) TIMER B0 (16-bit) TIMER B1 (16-bit) TIMER B2 (16-bit) A/D CONVERTER (10-bit x 8-ch) SERIAL I/O UART0, 1(UART/ CLOCK SYNCHRONOUS) (8-bit x 2-ch) SI/O2(CLOCK SYNCHRONOUS) (256-Byte AUTOMATIC TRANSFER) SYSTEM CLOCK GENERATOR XIN-XOUT (2-ch) XCIN-XCOUT CRC PROCESSOR (CCITT MODE) (GENERATION MULTINOMIAL: X15+X12+X5+1) VFD CONTROLLER (8-bit x 7) M16C/60 SERIES CPU CORE (16-bit) REGISTER R0H R0H R1H R0L R0L R1L R2 R3 A0 A1 FB SB MEMORY STACK POINTER ISP USP SUPERVISOR TIMER (15-bit) DMAC (2-ch) D/A CONVERTER (8-bit x 2-ch) ROM VECTOR TABLE INTB MULTIPLIER RAM (FLDC, ASI/ORAM) FOR ANALOG CIRCUIT 16, 63 VCC 89 VEE 14, 65 9 VSS CNVSS 100 AVCC 99 VREF 97 AVSS SYSTEM RESET 12 /RESET SYSTEM CLOCK 15 XIN 13 XOUT 20 DSP-1 IC501 : M30217MA-A203FP 16-bit Microcomputer Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Port P97 P96 P95 /CK2 P94 /SO2 P93 /SI2 P92 P91 P90 CNVSS P87 P86 /RESET XOUT VSS XIN Pin Name SCK SDT RCK RDT DEST /RD0 RCE SCKD SID CNVSS CKB DTB /RES XOUT MG MU +5BU INTD ERRA REM PDT PSW DBL I/O Function For Input selector Tuner, etc. O Serial Clock output Pin Port No. 31 P47/FL55 32 P46/FL54 33 P45/FL53 34 P44/FL52 35 P43/FL51 36 P42/FL50 37 P41/FL49 Pin Name F-CE F-CK F-RX F-TX VUP VDN SOD I/O Function For flash µ-COM write connector O Chip enable output O Serial clock output I Serial data input O Serial data output O Volume up output O Serial Data output O Clock output for model type distinction (*1) O Data output for destination distinction of Tuner (*2) O Data input for destination distinction of Tuner (*2) O Chip enable output for model type distinction (*1) O Serial Clock output for DIR5 O Serial data output for DIR5 For flash µ-COM write connector O Clock output for output port expansion IC O Data output for output port expansion IC System reset Crystal oscillator connected (10MHz) Ground Crystal oscillator connected (10MHz) +5V Power supply I Interrupt factor detect input from DIR5 I Data mute detect input from AC3D2av I Remote control input I Power down detect input I Standby switch input I Double speed sampling mode selection data input DIR5 O Chip enable output 2 for AC3D2av O Serial clock output for AC3D2av I Serial data input from AV3D2av O Serial data output for AC3D2av O Chip enable output 1 for AC3D2av O Chip enable output for Tuner O Chip enable output for Input Selector O Chip enable output for Input Selector O Volume down output I Serial data input from DIR5 O Chip enable output for CODEC O Chip select output for DIR5 I I (Over current) protection detect input I Rotary encoder input A I Rotary encoder input B I Stereo input from Tuner I Serial data input from Tuner O Initial clear output for DIR5 O Power relay output O Speaker relay output O Effect relay output O Grid 1 for FL display O Grid 2 for FL display O Grid 3 for FL display O Grid 4 for FL display O Grid 5 for FL display O Grid 6 for FL display O Grid 7 for FL display O Grid 8 for FL display O Grid 9 for FL display O Grid 10 for FL display O Grid 11 for FL display O Grid 12 for FL display O Grid 13 for FL display O Grid 14 for FL display +5V power supply O Grid 15 for FL display Ground O Grid 16 for FL display 38 P40/FL48 CECOD 39 P37/FL47 /CSD 40 P36/FL46 41 P35/FL45 42 P34/FL44 43 P33/FL43 44 P32/FL42 45 P31/FL41 46 P30/FL40 47 P27/FL39 48 P26/FL38 49 P25/FL37 50 P24/FL36 51 P23/FL35 52 P22/FL34 53 P21/FL33 54 P20/FL32 55 P17/FL31 56 P16/FL30 57 P15/FL29 58 P14/FL28 59 P13/FL27 60 P12/FL26 61 P11/FL25 62 P10/FL24 63 VCC 64 P07/FL23 65 VSS 66 P06/FL22 PRI POT-A POT-B /ST DO /ICD PRY SRY ERY G1 G2 G3 G4 G5 G6 G7 G8 G9 G10 G11 G12 G13 G14 +5VBU G15 MG G16 16 VCC 17 P85/INT5 18 P84/INT4 19 P83/INT3 20 P82/INT2 21 P81/INT1 22 P80/INT0 23 P77 CEAC2 24 P76/CK1 CLKAC 25 P75/RX1 26 P74/TX1 27 28 29 30 P73 P72 P71 P70 RXAC TXAC CEAC1 TCE CELC CETC *1 Model type distinction (H=1, L=0) DSP-A (Pin 3) RDS (Pin 6) 0 0 DSP-1 0 1 DSP-E 1 0 RX-V596 HTR-5250 1 RX-V596RDS 1 *2 Destination distinction of Tuner (H=1, L=0) V1 (Pin 4) V2 (Pin 5) 0 0 J model 0 1 U, C models 1 0 A, B, G, L models 1 1 R, T models 21 DSP-1 IC501 : M30217MA-A203FP 16-bit Microcomputer Pin Port No. 67 P05/FL21 68 P04/FL20 69 P03/FL19 70 P02/FL18 71 P01/FL17 72 P00/FL16 73 P57/FL15 74 P56/FL14 75 P55/FL13 76 P54/FL12 77 P53/FL11 78 P52/FL10 79 P51/FL09 80 P50/FL08 81 P67/FL07 82 P66/FL06 83 P65/FL05 84 P64/FL04 IC107 : BU2090 Serial Input/Parallel Output Driver for Output port expansion Pin Name P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 I/O Function Pin Port No. 85 P63/FL03 86 P62/FL02 87 P61/FL01 88 P60/FL00 89 VEE 90 P107/AN7 91 P106/AN6 92 P105/AN5 Pin Name P19 P20 P21 P22 VP LIMDT PRV PRD I/O Function O Segment 1 for FL display O Segment 2 for FL display O Segment 3 for FL display O Segment 4 for FL display O Segment 5 for FL display O Segment 6 for FL display O Segment 7 for FL display O Segment 8 for FL display O Segment 9 for FL display O Segment 10 for FL display O Segment 11 for FL display O Segment 12 for FL display O Segment 13 for FL display O Segment 14 for FL display O Segment 15 for FL display O Segment 16 for FL display O Segment 17 for FL display O Segment 18 for FL display O Segment 19 for FL display O Segment 20 for FL display O Segment 21 for FL display O Segment 22 for FL display O Power supply for FL display I Limitter DC detect input I PS (power voltage) protection AD value detect input I DC (power amp voltage) protection AD value detect input I Tuner meter AD value input O No connection O Full mute output (L: ON) I Key 2 AD data value input Ground I Key 1 AD data value input Standard power supply for AD input +5V power supply 93 P104/AN4 METER 94 P103/AN3 95 P102/AN2 96 P101/AN1 97 AVSS 98 99 100 P100/AN0 VREF AVCC NC /FMT KEY2 MG KEY1 +5M +5BU VSS 1 DATA 2 CLOCK 3 Q0 4 OUTPUT BUFFER (OPEN DRAIN) LATCH CONTROL LOGIC 16 VDD 15 Q11 14 Q10 12 Q9 12 Q8 11 Q7 10 Q6 9 Q5 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Port VSS DATA CLOCK Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q10 Q11 VDD Pin Name VSS DTB CKB SW1 SW2 SW3 SW4 SW5 /CONT1 /CONT2 /-10dB /ICAC NC NC I/O Ground Function 12-Bit SHIFT REGISTER I Control data input from I Control clock input microcomputer O Video select data for video input O output 1-5(*) selector O O O O Limitter control data output 1, 2 O O ­10dB control data output (L : ­10dB) O Initial clear output for AC3D2av O Unconnected O Unconnected Q1 5 Q2 6 Q3 7 Q4 8 (TOP VIEW) /T-MUTE O Tuner mute data output (L : Mute on) VDD +5V power supply Video Input CBL/SAT D-TV DVD/LD VCR V-AUX OFF SW1 (Pin4) * Video input Selector Control (H=High, L=Low, X=Don't care) SW2 L H L H L L SW3 X X L X H X SW4 L L H X H X SW5 H H H H H L (Pin5) (Pin6) (Pin7) (Pin8) H H H L H L 22 DSP-1 IC3 : YSD917 (DIR5) Digital Format Interface Receiver /LOCK MCK PCO M/S 4 22 2 10 XO 9 XI 11 AVDD 1 28 27 26 25 24 23 22 SCK SI DIGITAL AUDIO INTERFACE DECODER & LOCK ERROR JUDGMENT STANDARD CLOCK GENERATION 16 PCO 2 AVSS 3 M/S 4 DDIN 5 TEST 6 /IC 7 VSS 8 XO 9 XI 10 MCK 11 VDD 12 SDO 13 SDBCK 14 SDMCK SDWCK SDBCK SYNC FS128 DBL ERR SO /CS VDD INT /LOCK ERR DBL FS128 SYNC VSS SDMCK SDWCK /IC 7 PLL CLOCK SYSTEM SELECTION OUTPUT CLOCK GENERATION 15 14 DDIN 5 18 OUTPUT SELECTION 19 20 21 TOP VIEW 21 20 19 18 17 16 15 DATA BUS EACH CONTROL SIGNAL FRAME BUFFER SERIAL CONVERSION 13 SDO MICROPROCESSOR INTERFACE CHANNEL STATUS USER DATA INTERRUPT FACTOR DETECTION 26 25 27 28 23 /CS SI SCK Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin Name AVDD PCO AVSS M/S DDIN TEST /IC VSS XO XI MCK VDD SDO SDBCK SDWCK SDMCK I/O Power supply Function Pin No. 17 18 19 20 21 22 23 24 25 26 27 28 Pin Name VSS SYNC FS128 DBL ERR /LOCK INT VDD /CS SO SI SCK I/O Ground O Unconnected O Unconnected INT SO Function I/O PLL phase comparison output Ground I Unconnected I Digital audio data input Unconnected I Initial clear input from microcomputer Ground O Crystal oscillator connection (24. 576MHz) I Crystal oscillator connection (24. 576MHz) O Master clock output for AC3D2av Power supply O Serial audio data output for AC3D2av I/O 64fs bit clock output for microcomputer, CODEC, DAC I/O 1fs word clock output for microcomputer, CODEC, DAC O 256fs bit clock output for microcomputer, CODEC, DAC O Double speed sampling mode selection data output for microcomputer, CODEC, DAC O Unconnected O Unconnected O Interrupt factor detect output for microcomputer Power supply I Chip select input from microcomputer O Serial data output for microcomputer I Serial data input for microcomputer I Serial clock input from microcomputer 23 DSP-1 IC4 : YSS918D-F (AC3D2av) DSP + AC-3(Dolby Digital)/ Pro Logic/ DTS Digital Surround Decoder 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 VDD SDWCK0 SDBCK0 SDIA0 SDIA1 RAMA1 RAMA0 RAMWEN RAMOEN VSS VDD IPORT7 IPORT6 IPORT5 IPORT4 IPORT3 IPORT2 IPORT1 IPORT0 VSS VSS RAMD7 RAMD6 RAMD5 RAMD4 RAMD3 RAMD2 RAMD1 RAMD0 VDD1 RAMA2 SCK SI SO /CS /CSB RAMA3 TEST /IC RAMA4 VSS RAMA5 RAMA6 /SDBCK0 SURENC KARAOKE MUTE CRC NONPCM VDD2 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 50 49 48 47 46 45 44 43 42 TOP VIEW 41 40 39 38 37 36 35 34 33 32 31 PVSS SDWCK1 SDBCK1 SDOB0 SDOB1 SDOB2 RAMA7 RAMA8 RAMA9 VDD2 VSS OPORT7 OPORT6 OPORT5 OPORT4 OPORT3 OPORT2 OPORT1 OPORT0 VDD1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 OPORT0~7 IPORT0~7 69 SCK 66 /CS 67 SO 68 SI 32 99 ~ 92 ~ MICROPROCESSOR INTERFACE CONTROL SIGNALS /SDBCK0 57 SDBCK0 83 SDWCK0 82 39 CONTROL SIGNALS CONTROL REGISTERS COEFFICIENT PROGRAM RAM 48 SDBCK1 49 SDWCK1 SDI : SERIAL DATA INPUT SDO : SERIAL DATA OUTPUT SDIBCKSEL SDIBCKSEL 65 /CSB VDD1 RAMCEN RAMA16 RAMA15 SDIB0 SDIB1 SDIB2 XI XO VSS AVDD SDIB3 TEST TEST OVFB DTSDATA AC3DATA SDOB3 CPO AVSS VDD SDOA2 SDOA1 SDOA0 RAMA14 RAMA13 RAMA12 RAMA1 1 RAMA10 VSS SDOBCKSEL L, R SDOB INTERFACE SDOA INTERFACE SDIB INTERFACE SDIA INTERFACE SDIA0 84 INPUT BUFFER SDIA1 85 24x24 MAIN DSP AC-3/ PRO LOGIC/ DTS DECODER SDIASEL Ls, Rs C, LFE SDIBSEL 47 SDOB0 46 SDOB1 45 SDOB2 18 SDOB3 24x16 SUB DSP SURENC KARAOKE MUTE CRC AC3DATA DTSDATA NONPCM 56 55 54 53 17 16 52 STREAM0~7 CRC OPERATING CLOCK (25MHz) PLL DELAY RAM EXTERNAL RAM INTERFACE ERAMUSE DATA RAM 15 OVFB 72 79 RAMWEN 88 SDOA0 24 SDOA1 23 SDOA2 22 CPO 19 RAMOEN 89 SDIBO 5 SDIB1 6 SDIB2 7 RAMCEN 2 XI 8 XO 9 ~ 87, 86, 70, 64, 61, 59, 58, 44~42, 29~25, 4, 3 SDIB3 12 RAMA0~16 RAMD0~7 24 DSP-1 IC4 : YSS918D-F (AC3D2av) DSP + AC-3(Dolby Digital)/ Pro Logic/ DTS Digital Surround Decoder No. [. . . ] ! New Parts 61 New Parts DSP-1 P. MAIN Schm Ref C760 C761 C762 C763 D501 D502 D503 D504 D505 D507 D508 D509 D510 D511 D512 D513 D514 D515 D521 D522 D523 D524 D525 D526 D527 D528 D529 D530 D531 D532 D751 D752 D759 D760 D761 D762 D763 D764 D765 D766 D767 D768 G501 JK711 PJ501 PJ701 PN501 PN502 PN503 PN504 Q506 Q507 Q508 PART NO. VG291300 VG291300 UA655100 UA655100 VG439600 VD631600 VD631600 VD631600 VD631600 VN008700 VN008700 VN008700 VN008700 VN008700 VG440300 VG443200 VG440300 VG440300 VD631600 VN008700 VN008700 VN008700 VN008700 VN008700 VG440300 VG440300 VG440300 VG440300 VD631600 VD631600 VM702000 VG440300 VS997800 VS997800 VN008700 VS997800 VS997800 VN008700 VN008700 VG437200 VN008700 VN008700 VR463400 V2700900 V5479200 VR765100 V3750200 V3750200 V3750200 V3750200 VP883100 VP883100 VP883100 Description C. EL C. EL C. MYLAR C. MYLAR DIODE. ZENR DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE. ZENR DIODE. ZENR DIODE. ZENR DIODE. ZENR DIODE DIODE DIODE DIODE DIODE DIODE DIODE. ZENR DIODE. ZENR DIODE. ZENR DIODE. ZENR DIODE DIODE DIODE. BRG DIODE. ZENR DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE. ZENR DIODE DIODE TERM. GND JACK. PHONE JACK. PIN JACK. PIN PIN PIN PIN PIN TR TR TR 100uF 50V 100uF 50V 0. 1uF 50V 0. 1uF 50V MTZJ10C 10V 1SS133, 176, HSS104 1SS133, 176, HSS104 1SS133, 176, HSS104 1SS133, 176, HSS104 1SS270A 1SS270A 1SS270A 1SS270A 1SS270A MTZJ12C 12V MTZ J 30. 0A 30. 0V MTZJ12C 12V MTZJ12C 12V 1SS133, 176, HSS104 1SS270A 1SS270A 1SS270A 1SS270A 1SS270A MTZJ12C 12V MTZJ12C 12V MTZJ12C 12V MTZJ12C 12V 1SS133, 176, HSS104 1SS133, 176, HSS104 S5VB20 3. 5A 200V MTZJ12C 12V 1T2 1T2 1SS270A 1T2 1T2 1SS270A 1SS270A MTZJ4. 7C 4. 7V 1SS270A 1SS270A D3. 5 TP00385 JY-6317-03-030GD 4P YKC21-3739 2P L=70 L=70 L=70 L=70 2SC1890A D, E 2SC1890A D, E 2SC1890A D, E Schm Ref Q509 Q510 Q511 Q512 Q513 Q514 Q515 Q516 Q517 Q518 Q519 Q520 Q521 Q522 Q523 Q524 Q525 Q526 Q527 Q528 Q529 Q530 Q531 Q532 Q533 Q534 Q535 Q536 Q537 Q538 Q539 Q540 Q541 Q542 Q543 Q545 Q546 Q547 Q548 Q549 Q550 Q551 Q552 Q553 Q554 Q555 Q557 R516 R538 R543 R545 R552 R559 PART NO. VP883100 VP883100 VP883100 V3966800 VP883100 V3966800 VP883100 V3966800 VP883100 V3966800 VP883100 V3966800 VK432900 VK432900 VK432900 VK432900 VK432900 VP872700 VR355900 iC1815I0 VP872600 VP872700 VR355900 VS883300 VP872600 VP872700 VR355900 VP883000 VP872600 VP872700 VR355900 VP883000 VP872600 VP872700 VR355900 VP872600 VP883100 VP883100 VP883100 VP883100 VP883100 VP883000 iA1015I0 iC1815I0 VP883100 iC1815I0 VR510800 HV754100 VP940400 HV756150 VP940400 VP940400 HV755100 TR TR TR TR TR TR TR TR TR TR TR TR TR TR TR TR TR TR TR. PAIR TR TR TR TR. PAIR TR TR TR TR. PAIR TR TR TR TR. PAIR TR TR TR TR. PAIR TR TR TR TR TR TR TR TR TR TR TR TR R. CAR. FP R. MTL. OXD R. CAR. FP R. MTL. OXD R. MTL. OXD R. CAR. FP Description 2SC1890A D, E 2SC1890A D, E 2SC1890A D, E 2SB949 O, Y 2SC1890A D, E 2SB949 O, Y 2SC1890A D, E 2SB949 O, Y 2SC1890A D, E 2SB949 O, Y 2SC1890A D, E 2SB949 O, Y 2SD1915F S, T 2SD1915F S, T 2SD1915F S, T 2SD1915F S, T 2SD1915F S, T 2SC4488 S, T 2SA1695/C4468 OPY 2SC1815 Y 2SA1708 S, T 2SC4488 S, T 2SA1695/C4468 OPY 2SB1565 E, F 2SA1708 S, T 2SC4488 S, T 2SA1695/C4468 OPY 2SA893A D, E 2SA1708 S, T 2SC4488 S, T 2SA1695/C4468 OPY 2SA893A D, E 2SA1708 S, T 2SC4488 S, T 2SA1695/C4468 OPY 2SA1708 S, T 2SC1890A D, E 2SC1890A D, E 2SC1890A D, E 2SC1890A D, E 2SC1890A D, E 2SA893A D, E 2SA1015 Y 2SC1815 Y 2SC1890A D, E 2SC1815 Y 2SD2396 J, K 10 1/4W 100 1W 1. 5K 1/4W 100 1W 100 1W 100 1/4W ! [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA DSP-1

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA DSP-1 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag