User manual YAMAHA DSP-A970

[. . . ] DSPA970 CONTENTS SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover SETUP & ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1-1. GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1-2. SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When initialized, the "*" mark will disappear. 5. Input level adjustment (INPUT LVL TRIM) This function is provided for all input sources. It can be controlled from 0 to +6 dB in 2 dB steps. The sound level of each input source should be the same as that of regular CDs. To adjust the input level, either press the INPUT TRIM control on the front panel (see page 23), or select the "5. INPUT LVL TRIM" in step 2 on page 24. 4. Locking DSP parameters and other adjustments (MEMORY GUARD) If you wish to prevent accidental alteration to DSP parameters or other adjustments on this unit, select "ON". In this position, they are locked and cannot be changed. The following functions on this unit can be locked by this operation. · · DSP parameters Other setting/adjustment items in the "SET/MENU" mode (CENTER MODE/CENTER GEQ/PARAMETER INIT/INPUT LVL TRIM) ON SCREEN display key INPUT TRIM control FRONT, REAR and CENTER level +/­ keys TEST switch · · · · 26 GENERAL OPERATION 2-1. Set the MASTER VOLUME control to minimum. Front panel Front panel * On the front panel, VCR 1, CD or LD can be selected directly by pressing the corresponding switch. English 4. Turn the power on. Front panel Remote control 5. Increase the setting of the MASTER VOLUME control to your listening level. Front panel Remote control or or 3. (The selected source is shown by the display panel, the monitor screen and illumination of the corresponding indicator over the input selector switches. ) Adjust the BASS, TREBLE, BALANCE controls, etc. , or select a desired sound field program. (See page 29. ) NOTE: If a different audio source is selected with the input selector keys on the remote control unit while enjoying a video source, the sound from the newly selected audio source is heard, but the picture from the video source can still be seen. Front panel Remote control or 27 2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER) To record an input source to be played 1. Press the REC OUT switch (so that "REC OUT. . . " appears on the display and the monitor screen). Front panel 3. Press the REC OUT switch (so that the indicator corresponding to the selected source to be recorded stops flashing). * The same result will be gained after 5 seconds automatically without any operation. Select an input source to be played (and to be recorded). (See page 27 for the method of input source selection. ) Front panel Remote control 2. Within 5 seconds after the REC OUT switch is pressed, select the "SOURCE" position with the input selector switch (so that "REC OUT SOURCE" appears on the display panel and the monitor screen). Front panel 5. [. . . ] and Canada models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240V/50 Hz Europe model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230V/50 Hz General model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]