User manual YAMAHA DSP-A990

[. . . ] R DSP- 990 A REAR 200m FRONT L NATURAL SOUND DIGITAL SOUND FIELD PROCESSING AMPLIFIER DSP-A990 CINEMA DSP 7ch INPUT SELECTOR VCR I CD LD PRO LOGIC DECODER TV/DBS SOUND FIELD PROCESSOR PHONO L FRONT R ­200m REAR FRONT DIGITAL SOUND FIELD PROCESSING AMPLIFIER / OPERATION MANUAL AMPLIFICATEUR DE TRAITEMENT DE CHAMP SONORE NUMERIQUE / MODE D'EMPLOI ­200m REAR 200m R DIGITAL-KLANGFELDVERSTÄRKER / BEDIENUNGSANLEITUNG DIGITAL LJUDFÄLTSFÖRSTÄRKARE / BRUKSANVISNING AMPLIFICATORE DIGITALE DI PROCESSAMENTO DEL CAMPO SONORO / LIBRETTO D'ISTRUZIONI L AMPLIFICADOR DE PROCESAMIENTO DE CAMPO DE SONIDO DIGITAL / MANUAL DE INSTRUCCIONES BEDIENINGSHANDLEIDING VOOR DIGITALE GELUIDSVELDPROCESSING-VERSTERKER Congratulations! You are the proud owner of a Yamaha Digital Sound Field Processing (DSP) System--an extremely sophisticated audio component. The DSP system takes full advantage of Yamaha's undisputed leadership in the field of digital audio processing to bring you a whole new world of listening experiences. Follow the instructions in this manual carefully when setting up your system, and the DSP system will sonically transform your room into a wide range of listening environments--anything from a famous concert hall to a cozy jazz club. In addition, you get incredible realism from Dolby-Surround encoded video sources using the built-in Dolby Pro Logic Surround Decoder. [. . . ] * The same result will be obtained after 5 seconds without any operation. 4. Select an input source to be played (and to be recorded). (See page 28 for the method of input source selection. ) Front panel INPUT SELECTOR VCR I CD LD Remote Control CD or 2. Within 5 seconds, select the "SOURCE" position with the input selector switch (so that "REC OUT SOURCE" appears on the display panel and the monitor screen). Front panel INPUT SELECTOR VCR I CD LD TV/DBS PHONO 5. Set the tape deck or VCR used for recording to the recording mode. * Adjust the recording level on the tape deck or VCR. REC OUT SOURCE NOTE: To record picture from a video source and sound from another audio source, in step 4, first select a video source with an input selector switch on the front panel, and then select an audio source with the input selector keys on the remote control unit. 29 To record a source other than the input source This unit has a function of selecting a source to be recorded to tape deck or VCRs independent of the selection of input source. Press the REC OUT switch (so that "REC OUT. . . " appears on the display and the monitor screen). Front panel 4. Play the source and confirm it by selecting it with an input selector switch and increasing the setting of the master VOLUME control. Front panel INPUT SELECTOR VCR I CD LD TV/DBS PHONO 2. Within 5 seconds, select the source to be recorded with an input selector switch. (The indicator corresponding to the selected source to be recorded will flash. ) Front panel INPUT SELECTOR VCR I CD LD 5. Set the tape deck or VCR used for recording to the recording mode. * Adjust the recording level on the tape deck or VCR. While recording a source, you can enjoy listening to and/or watching another source selected with the input selector switch. Front panel INPUT SELECTOR VCR I CD LD Remote control TUNER TV/DBS or PHONO TV/DBS PHONO REC OUT CD While recording, you can monitor the audio and/or video signals to be recorded by selecting the tape deck or VCR used for recording with the input selector switch. 30 3. Press the REC OUT switch (so that the indicator corresponding to the selected source to be recorded stops flashing). * The same result will be obtained after 5 seconds without any operation. NOTE: Adjusting the master VOLUME, BASS, TREBLE controls, etc. , or selecting a sound field program has no effect on the material being recorded. NOTE: Composite video and S video signals pass independently through this unit's video circuits. Therefore, when recording or dubbing video signals between two video cassette recorders, if your source VCR is connected to provide only S video (or only composite video) signals, you can record only a S video (or only a composite video) signal on your second VCR. NOTE: Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws. 2-3. DIGITAL SOUND FIELD PROGRAMS This unit has 12 programs for digital sound field processing, 7 from actual acoustic environments from around the world, and 5 programs for Audio/Video sources including sources encoded with Dolby Pro Logic surround. Many of the programs contain various parameters that can be adjusted to the listener's taste. English 2-4. Set the PARAMETER/SET MENU switch on the remote control to the PARAMETER position. Remote control PARAMETER If you watch a video software that uses scramble or encoded signals to prevent it from being dubbed, there may be a case that display information superimposed on the picture and/or the picture itself is disturbed due to those signals. SET MENU 2. [. . . ] PAL [Singapore Model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTSC [General Model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTSC/PAL Video Signal Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 S-Video Signal Level Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]