User manual YAMAHA DSP-AX620

[. . . ] GB DSP-AX620 Natural Sound AV Amplifier Amplificateur audio-vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place with at least 30 cm on the top, 20 cm on the right and left, and 10 cm at the back of this unit for ventilation space -- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] This makes it possible to change the jack assignment and effectively connect more component. Once you assign, you can select that component with INPUT l / h (or the input selector buttons). 4D COAXIAL IN (5) · · · · · CD BASIC OPERATION Note · You cannot select an item more than once for the same type of jack. I 4A CMPNT-V INPUT (for the COMPONENT VIDEO jacks) Initial settings: [A] DVD [B] D-TV/CBL 5 INPUT MODE (initial input mode) Use this feature to designate the input mode when turning on the power of this unit with the source component connected to more than one type of input jacks. Choices: AUTO, LAST Initial setting: AUTO ADVANCED OPERATION 4A CMPNT-V INPUT [A] · · · · · DVD [B] · · · · · D-TV/CBL ADDITIONAL INFORMATION I 4B OPTICAL OUT (for the OPTICAL OUTPUT jack) Initial setting: (1) MD/CD-R 5 INPUT MODE AUTO LAST ­/+ / : Select : Exit 4B OPTICAL OUT (1) · · · · · MD/CD-R AUTO Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode. LAST Select this to set this unit to automatically select the last input mode used for that source. APPENDIX English 35 SET MENU Output level 6 DOLBY D. SET (Dolby Digital set) This setting is effective only when this unit decodes Dolby Digital signals. MAX Dialog level 6 DOLBY D. SET LFE LEVEL · · · · 0dB D-RANGE · · · MAX STD MIN Input level STD MIN H-LEVEL CUT 0. 0 1. 0 Output level I LFE LEVEL Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital signal. The LFE signal carries the lowfrequency special effect sound which is only added to certain scenes. Control value (dB): ­20 to 0 Initial setting: 0 dB 1. 0 0. 0 L-LEVEL BST Output level ­/+ / : Adjust : Select Dialog level Dialog level Input level Input level Note · When you select MIN, the sound output may be faint because some Dolby Digital signals are not compatible with the minimum-level dynamic range. In this case, select MAX or STD. Notes · Adjust the LFE level according to the capacity of your subwoofer. · Normally, around ­6 dB to ­8 dB is most suitable for listening at home. 7 DTS SET (DTS LFE level) This setting is effective only when this unit decodes DTS signals. Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a DTS signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes. Control range (dB): ­10 to +10 Initial setting: 0 dB I D-RANGE (dynamic range) Use this feature to adjust the dynamic range (the difference between the maximum level and the minimum level of sounds). Choices: MAX, STD (standard), MIN Initial setting: MAX · Select MAX for feature films. · Select MIN for listening to sources at an extremely low volume level. 7 DTS SET LFE LEVEL · · · · 0dB ­/+ / : Adjust : Exit Note · Adjust the LFE level according to the capacity of your subwoofer. 36 SET MENU 8 SP DELAY TIME Use this feature to adjust the delay of the center channel sound. This feature works when this unit decodes a Dolby Digital or DTS signal. Ideally, the center speaker should be the same distance from the listening position as the left and right main speakers. However, in most home situations, the center speaker is placed in line with the main speakers. By delaying the sound from the center speaker, the apparent distance from the center speaker to the listening position can be adjusted to make it seem the same as the distance between the left and right main speakers to the listening position. Adjusting the delay time for the center speaker is especially important for giving depth to the dialog. Control range (ms): 0 to 5 Initial setting: 0 ms 9 DISPLAY SET 9 DISPLAY SET BLUE BACK · · · AUTO OSD SHIFT · · · · · · 0 DIMMER · · · · · · · · · · 0 INTRODUCTION I BLUE BACK Selecting AUTO for the on-screen display setting displays a blue background when there's no video signal input. Nothing is displayed on the screen including the onscreen display if OFF is selected. [. . . ] 22 TV position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 H HP TONE CTRL (SET MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 I I/O ASSIGNMENT (SET MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 61 IMPEDANCE SELECTOR switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]