User manual YAMAHA DSP-Z7

[. . . ] RBGLE AV Amplifier OWNER'S MANUAL English Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. [. . . ] Press 9k / n / l / h to select "SAVE" and then press 9ENTER. y · To reset the name, select "RESET" and then press 9ENTER. · To cancel the operation without change, select "CANCEL" and then press 9ENTER. 1 Press 9ENTER to display the "I/O Assignment" screen. Coax Opt In In PHONO CD TV MD/CD-R BD/HD DVD DVD 1 4 8 5 2 6 A B IN 1 IN 2 2 Opt Comp HDMI Out In In EXIT 2 Press 9k / n /l / h to select the cell in row "MD/CD-R", column "Coax In" and then press 9ENTER. Press 9l / h to select "1" and then press 9ENTER. Select "None" to clear the existing assignment. y To return to the previous screen without change, press 9k. 3 87 En Graphical user interface (GUI) menu 4 Press 9k / n /l / h to select "EXIT" and then press 9ENTER. y You cannot select a specific item more than once for the same type of jack. Note The short message display (except some status messages) does not appear when the component video signals with 720p, 1080i or 1080p resolutions are input. Input Rename (Input rename) Use this feature to change the name of the input source that appears in the GUI screen and in the front panel display. Playback Screen (Playback screen display time) Use this feature to set the playback screen display time. Choice Always 10sec Functions Displays the menu unceasingly during an operation. Turns off the menu 10 seconds after you perform a certain operation. Turns off the menu 30 seconds after you perform a certain operation. 1 Press 9k / n /l / h to select a character or function and then press 9ENTER to confirm the selection. Repeat step 1 until you input a name you want to use. Press 9k / n /l / h to select "SAVE" and then press 9ENTER. y · To reset the name, select "RESET" and then press 9ENTER. · To cancel the operation without change, select "CANCEL" and then press 9ENTER. 30sec y This setting is applied to the GUI screen in the main zone and OSD in Zone 2, Zone 3, or Zone 4. 2 Position (GUI screen position) Use this feature to adjust the vertical and horizontal position of the GUI screen. Control range: ­5 (downward/left) to +5 (upward/right) Button 9k 9n 9h 9l Moving direction of the GUI display Up Down Right Left Display Set (Display settings) Front Panel Display (Front panel display setting) Dimmer (Dimmer) Use this feature to adjust the brightness of the front panel display. Control range: ­4 to 0 Scroll (Front panel display message scroll) Use this feature to set the front panel display message scroll pattern. Choice Continue Functions Continuous mode. Select this to display the operation status in the front panel display in a continuous manner. Select this to display the operation status in the front panel display by the first 14 alphanumeric characters after scrolling all characters once. Wall Paper (Wall paper) Use this feature to display the wall paper or gray background in your video monitor when there is no video signal being input. Choice None Piano Functions Does not display any background in your video monitor. Displays a background image (the photograph of a piano) in your monitor when there is no video signal being input. Displays a background image (the photograph of a horn) in your monitor when there is no video signal being input. Displays a background image (the photograph of an electric guitar) in your monitor when there is no video signal being input. Display a gray background in your monitor when there is no video signal being input. Once Horn Short Message (Short message display) Use this feature to activate or deactivate the short message display displayed in the GUI screen in the main zone. Choice On Off Functions Activates the short message display function. Deactivates the short message display function. Electric Guitar Gray 88 En Graphical user interface (GUI) menu iPod (iPod settings) Standby Charge (iPod charge on the standby mode) Use this feature to select whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode. Choice Auto Off Functions Charges the battery of the stationed iPod when this unit is turned on and in the standby mode. [. . . ] As always, speeding things up is of great interest. Please send bug reports, offers of help, etc. 3. About PNG Reference Library libpng versions 1. 2. 6, August 15, 2004, through 1. 2. 29, May 8, 2008, are Copyright (c) 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1. 2. 5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1. 0. 7, July 1, 2000, through 1. 2. 5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1. 0. 6 with the following individuals added to the list of Contributing Authors Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. [. . . ]