User manual YAMAHA DSP-Z9

[. . . ] GB PURE DIRECT REC OUT/ZONE 2 SOURCE/REMOTE VOLUME MULTI JOG MD/TAPE CD-R CD TUNER PHONO BALANCE 2CH/MULTI CH INPUT SELECTOR SPEAKERS A B DTV/LD CABLE SAT VCR 1 VCR 2 DVR VIDEO AUX DVD INPUT MODE MULTI CH INPUT STRAIGHT DSP PROGRAM TONE CONTROL EFFECT STANDBY /ON SILENT OPTIMIZER MIC VIDEO AUX PHONES S VIDEO VIDEO L AUDIO R OPTICAL AV Amplifier Amplificateur Audio-Vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place -- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. [. . . ] · Select EQ Defeat to cancel equalizing. Choices: ­6 to +6 (dB) You can adjust 9 frequency bands: 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16kHz · Front L adjusts the tonal quality of the front left speaker. · Front R adjusts the tonal quality of the front right speaker. · Center adjusts the tonal quality of the center speaker. · Surround L adjusts the tonal quality of the surround left speaker. · Surround R adjusts the tonal quality of the surround right speaker. · Surround Back L adjusts the tonal quality of the surround back left speaker. · Surround Back R adjusts the tonal quality of the surround back right speaker. · Presence L adjusts the tonal quality of the presence left speaker. · Presence R adjusts the tonal quality of the presence right speaker. Note Cinema EQ and Graphic EQ adjustments do not affect the output to your headphones. · Select Defeat if you do not want to make any adjustments. · Select Speaker to adjust the bass/treble balance of your speakers. · Select Headphone to adjust the bass/treble balance of your headphones. Bass (Bass control) Use this feature to adjust low-frequencies output to your speakers or headphones. Choices: ­6 to +6 (dB), Initial: 0 dB You can adjust three frequency bands: 125Hz, 350Hz, 500Hz. 62 SYSTEM OPTIONS Treble (Treble control) Use this feature to adjust high-frequencies output to your speakers or headphones. Choices: ­6 to +6 (dB), Initial: 0 dB You can adjust three frequency bands: 2. 5kHz, 3. 5kHz, 8. 0kHz. Dynamic Range (Dynamic range) Use to select the amount of dynamic range compression to be applied to your speakers and headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. To access these parameters, select: Manual Setup > Sound > Dynamic Range > Choices: MAX (maximum), STD (standard), MIN (minimum) Note TONE CONTROL is not effective when: ­ The THX (page 49) or DIRECT STEREO (page 43) program is selected. ­ PURE DIRECT is selected. Speaker (Speaker) Select to adjust the speaker compression. Headphone (Headphone) Select to adjust the headphone compression. · Select MIN for listening to sources at low volume levels. LFE Level (Low-frequency effect level) Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries lowfrequency special effects which are only added to certain scenes. [. . . ] and Canada models]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V/60 Hz [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V/50 Hz [China model]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]