User manual YAMAHA DTX532K/DTX562K ASSEMBLY MANUAL

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA DTX532K/DTX562K. We hope that this YAMAHA DTX532K/DTX562K user guide will be useful to you.

Lastmanuals help download the user guide YAMAHA DTX532K/DTX562K.


Mode d'emploi YAMAHA DTX532K/DTX562K
Download
Manual abstract: user guide YAMAHA DTX532K/DTX562KASSEMBLY MANUAL

Detailed instructions for use are in the User's Guide.

[. . . ] * Be sure to also read the Assembly Manuals and/or Owner’s Manuals that came with your pads and rack. Assemble the RS502 Electronic Drum Rack. For instructions on how to assemble the RS502 Electronic Drum Rack, refer to the Owner’s Manual that came with it. 3 Assemble the pads and the drum module to the electronic drum rack. Assembling the snare and tom pads Tom pads DTX532K: TP70 DTX562K: XP70 2. Push the snare pad onto the rack’s snare holder. Ensure that the snare holder’s rod is fully inserted into the snare pad’s mounting hole, and then tighten the clamp bolt to secure the pad in place. Snare pad Snare holder Rod  Tom pads WARNING Failure to observe the precautions described below can result in serious injury or even death. CAUTION Failure to observe the precautions described below can result in injury and/or property damage. 1. As with the snare pad, attach a wing bolt (DTX532K) or clamp bolt (DTX562K) to each of the three tom pads and provisionally tighten (by five or six turns). Each time, ensure that the tom holder’s rod is fully inserted into the tom pad’s mounting hole, and then tighten the bolt to secure the pad in place. • Young children using this electronic drum kit should be supervised by a guardian to eliminate any possibility of injury. [. . . ] • Do not use the electronic drum kit’s rack to hold acoustic drums. Doing so could cause clamps to break and the drums to fall off, which in turn could lead to injury. 2. Push each of the tom pads onto one of the rack’s Push on Clamp bolt DTX532K Tom pad: TP70 Rod DTX562K Tom pad: XP70 Rod NOTICE: Usage Precautions • When connecting and disconnecting cables, be sure to hold the plug and not the cable itself. In addition, avoid placing heavy items on top of cables and do not allow them to touch sharp edges. Failure to avoid these precautions can lead to cable breakage and disconnection. • Do not climb onto the electronic drum kit and avoid placing heavy objects on it. Failure to observe this precaution can result in malfunction. • Avoid using or storing the electronic drum kit in very hot locations (i. e. , in direct sunlight, in close proximity to a heater, or in a closed vehicle) or in highly humid locations (i. e. , in a bathroom or outdoors in wet weather). Failure to observe this precaution can lead to warping, discoloration, malfunction, or breakdown. • Avoid cleaning the electronic drum kit with organic solvents, paint thinner, or alcohol as these substances can cause warping and discoloration. Instead, we recommend you remove dust using a soft dry cloth or wipe clean using a moist, tightly-wrung cloth. If the electronic drum kit is very dirty, first wipe the dirt away using a cloth moistened with a neutral detergent solution and tightly wrung. Following this, wipe away the detergent solution using a cloth soaked in water and tightly wrung. XP80 Snare Pad 3. Loosen bolts A to D as shown below to adjust the height and angle of the snare pad’s playing surface. [. . . ] In such a case, loosen the key bolt as much as possible without removing it. The second felt pad removed from the cymbal holder in Step 2 above is not required for assembly. 9. Tighten the wing nut to secure the pad to the cymbal holder. Stopper Cymbal pad Smaller hole Wing nut Felt pad that came with cymbal Plug the straight ends of the nine-channel snake cable into the trigger input jacks ([qSNARE] to [oHI-HAT] and [HI-HAT CONTROL]) on the back of the drum module. • When using the standard setup, the stickers on each of the snake cable’s plugs will indicate the name of the corresponding pad. 2. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA DTX532K/DTX562K

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA DTX532K/DTX562K will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag