User manual YAMAHA DVD-S1500

[. . . ] G DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S1500 OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING Important Note DK Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Bemærk: Netafbryderen STANDBY/ON er sekundært indkoblet og afbryder ikke strømmen fra nette. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. [. . . ] Choices: On, Off Initial setting: Off Sleep Timer Places this unit in standby mode when playback is stopped and this unit is not operate for 20 minutes. Choices: On, Off Initial setting: Off TV TV shape If you connect to a conventional 4:3 aspect TV, select [4:3 panscan] (the left and right sides are trimmed when you play 16:9 video) or [4:3 letterbox] (black areas appear at the top and bottom when you play 16:9 video). Select [Wide-screen] if you connect to a Wide-Screen TV. Choices: 4:3 panscan, 4:3 letterbox, Wide-screen Initial setting: 4:3 panscan Slide Show Use this feature for JPEG slide show playback. Picture Time Sets the duration for each image. Choices: Slow, Medium, Fast Initial setting: Medium 12 On-screen menu English Audio Menu 4:3 panscan 4:3 letterbox Widescreen Digital output Enables you to specify the type of digital output to suit your AV receiver. Select [PCM only] if your receiver is not capable of decoding multi-channel audio. Select [All] if you connected this unit's digital out jacks to a multi-channel decoder receiver. Choices: Off, PCM only, All Initial setting: All Note: ­ Digital output is not available for SA-CDs. Analog output Enables you to specify the type of analog output suitable for your AV receiver. Choices: Stereo, DolbysurrCompat, 3D sound, Multi-channel Initial setting: Multi-channel Stereo: In this setting, the multi-channel audio is downmixed to a stereo signal. Select this setting when connecting to a TV, stereo amplifier/ receiver, etc. DolbysurrCompat: Select this setting when using equipment with a Dolby Surround Pro Logic decoder. In this setting, the multi-channel audio (Dolby Digital, MPEG-2, DTS) is downmixed to a Dolby Surroundcompatible 2-ch output. 3D sound: In a setup without rear speakers (analogue stereo output), 3D Sound remixes the six channels of digital surround into a two speaker output while retaining all of the original audio information. The result is the sensation of being surrounded by multiple speakers. Multi-channel: Select this setting when using a multichannel AV receiver with 6-ch discrete inputs. The multichannel audio signals those of like DVD-Audio, DVDVideo, and SA-CD are output from the respective 6-ch discrete output jacks. In this mode, this unit will perform DTS decoding, Dolby Digital 5. 1-channel decoding, or MPEG Multichannel decoding when applicable, and Dolby Pro Logic II decoding on 2-ch sound tracks except for SA-CD. PCM output Enables you to select PCM digital output at 48 kHz or 96 kHz. If you select [48 kHz], PCM data will be converted to 2-ch 48 kHz or less. Select [48 kHz] if the connected equipment cannot process signals with a sampling frequency of 96 kHz or 88. 2 kHz. [. . . ] ­ Check that the speakers are connected correctly. ­ Check the settings menu to ensure that the digital output is set to ALL or PCM. ­ Check to ensure that the audio format of the selected audio language matches your receiver capabilities. ­ Check that the SCART cable is connected to the correct device (See "Audio connection" on page 7, 8. ) ­ Check that the disc label is facing up. [. . . ]