User manual YAMAHA E-70

[. . . ] Click the page numbers that appear in the table of contents to go directly to the corresponding page. Select "Find" or "Search" from the Adobe Reader "Edit" menu and enter a key word to locate related information anywhere in the document. Click an item in the list that appears after searching to go directly to the corresponding page. NOTE The names and positions of menu items may vary according to the version of Adobe Reader being used. The illustrations and LCD screens as shown in this owner's manual are for instructional purposes only, and may appear somewhat different from those on your instrument. The illustrations and LCD screens from the TNR-W are used for the instructions and descriptions in this manual. Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. When using a power adaptor, even when the STANDBY/ON switch is in the "STANDBY" position, electricity is still flowing to the instrument at the minimum level. [. . . ] Animation displayed when clear executed 5. Clear All Blocks Clear All Blocks OK Clears all active notes from all blocks and layers. This produces the same result as pressing the [CLEAR] button (long press). Rotate the jog dial to display "OK" if it isn't already showing, then press the [OK] button. To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to display "CANCEL" and press the [OK] button. Range . Animation displayed when clear executed E-70 Manual 57 Parameter Settings Setting Parameters with the Jog Dial Edit Menu 6. Reset All Blocks Reset All Blocks OK Clears all active notes and initializes all settings for all blocks and layers. Rotate the jog dial to display "OK" if it isn't already showing, then press the [OK] button. To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to display "CANCEL" and press the [OK] button. Range . Animation displayed when reset executed E-70 Manual 58 Parameter Settings Setting Parameters with the Jog Dial Preference Menu Preference Menu The Preference menu provides access to initial settings that apply to the entire instrument. The Preference menu submenu includes the following 6 items. 1. It lets you save original data you've created on the instrument to a SD Memory Card, and allows you to load data from a card to the instrument. Be sure to handle SD Memory Cards with care. Follow the important precautions below. Compatible SD Memory Card types SD Memory Cards with a capacity of two gigabytes or less. NOTE: · SD Memory Cards formatted on this device may or may not be useable as is on other devices. · This instrument is not compatible with SDIO and SDHC cards. * Accessing includes saving, loading, formatting and deleting. Also, be aware that the instrument will automatically access the SD Memory Card to check the media type when it is inserted while the instrument is turned on. Formatting SD Memory Cards If you find that you are unable to use new, blank SD Memory Cards or cards that have been used with other devices, you may need to format them. For details on how to format a SD Memory Card, see Page 107. Keep in mind that all data on the card will be lost after formatting. Make sure to check beforehand whether or not the card contains important data. NOTE: · SD Memory Cards formatted on this device may or may not be useable as is on other devices. Never attempt to remove the SD Memory Card or turn the power off during accessing. Doing so can damage the data on the instrument or card and possibly damage the SD Memory Card itself. About SD Memory Cards Handle SD Memory Cards with care, and follow these precautions: There are times when static electricity affects SD Memory Card. [. . . ] A scale other than the default Ionian scale has been selected. Select the Ionian scale. page 61 page 33, 43 ­ page 47 ­ ­ ­ Some notes cut off. ­ page 44 The same voice applies to the same-numbered layers in all blocks. page 6 page 106 page 39 E-70 Manual 113 Appendix Troubleshooting Symptom SD Memory Card Possible Cause & Solution Page The SD Memory Card is write-protected. Set the card's write-protect switch to the OFF position. Performances that exceed 39KB (About 1000 operations) cannot be recorded. [. . . ]