User manual YAMAHA EL-37

[. . . ] SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded / stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. [. . . ] Separate recording for Lead and/or Keyboard Percussion part: Hold down the SHIFT button and simultaneously press the appropriate button in the top row in the procedure #2. The two buttons (indicated in the illustration at right) functions as Keyboard Percussion selectors in the record mode. RECORD/LEAD ­ Records the performance data of the Lead voice when turned on. ­ Records the performance data of Keyboard Percussion when turned on. (Keyboard Percussion can be recorded and played independent of the Rhythm patterns. ) Holding down the SHIFT button in the record condition lets you select these "hidden" functions. The lamps above each button will also change to indicate the status of SHIFT-selected parts. RECORD UPPER LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT FROM TO SONG COPY SONG DEL. 01 PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY MUSIC DISK RECORDER ­ TEMPO + FORMAT RECORD PLAY SHIFT (LEAD) (K. PERC. ) (LEAD) (K. PERC. ) 01 PAUSE REM. Music Disk Recorder If you don't record the Lead and Keyboard Percussion parts separately, the Lead part will be recorded as the Upper data and the Keyboard Percussion part will be recorded as the Lower/Pedal data. NOTE 3. Press the PLAY button, and start playing after numbers appear in the display. For this example, play the Lower keyboard and Pedalboard. 4. Press the STOP button when you are finished with your performance to stop recording. Now that you've recorded the first parts of your performance. 54 5. Press the RECORD button to set up recording of the next part. In this case, the song (number) contains the performance data of the Lower and Pedal in addition to the registration and setup data. The small bars ("­­") appear at the left part of LED display and flash along with the song number, warning you that the selected song number already contains recorded data. RECORD UPPER LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT FROM TO SONG COPY SONG DEL. --01 PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY MUSIC DISK RECORDER ­ TEMPO + FORMAT 6. Press the RECORD button again to record another part. (Upper part. ) The RECORD lamp lights up and the PLAY and CUSTOM PLAY lamps begin blinking, indicating that the Music Disk Recorder is ready to record. RECORD UPPER LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT FROM TO SONG COPY SONG DEL. 01 PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY MUSIC DISK RECORDER ­ TEMPO + FORMAT 7. Press the RECORD buttons for each part in the upper left row to turn off the parts you have already recorded. In this case, press RECORD/LOWER, RECORD/PEDAL and RECORD/CONTROL to turn off. RECORD UPPER LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT FROM TO SONG COPY SONG DEL. 01 PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY MUSIC DISK RECORDER ­ TEMPO + FORMAT 8. Press the CUSTOM PLAY button to start recording of the new part or parts. (Upper part. ) Playback of the previously recorded parts starts immediately. The CUSTOM PLAY button is used here to record only the parts that have been selected for recording, and play back only those parts that have been selected for playback. Since registration data has already been recorded with the first parts of the song, recording begins immediately. While you listen to the parts being played back, start playing the melody on the Upper keyboard. When the end of the recorded performance is reached, playback is automatically stopped and the STOP status is resumed. RECORD UPPER LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT 6. Music Disk Recorder SONG REPEAT FROM TO SONG COPY SONG DEL. 610 PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY MUSIC DISK RECORDER ­ TEMPO + FORMAT NOTE The CUSTOM PLAY button is used to play back the specified track(s). The length of a subsequently recorded part cannot exceed the length of the previously recorded parts. [. . . ] The product does not operate, exhibits a marked change in performance; or e. The product has been dropped, or the enclosure of the product has been damaged. 12. 4. Some electronic products utilize external power supplies or adapters. DO NOT connect this type of product to any power supply or adapter other than one described in the owners manual, on the name plate, or specifically recommended by Yamaha. [. . . ]