User manual YAMAHA F02

[. . . ] F02 Owner’s Manual IMPORTANT — Check your power supply — Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the rear panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] A large number of MIDI devices are compatible with SMF Format 0, and most commercially available MIDI sequence data is provided in SMF Format 0. MIDI Songs recorded in this instrument are saved as SMF Format 0. NOTE The MIDI Song can be played on this instrument is the size of up to about 400KB per single Song. Audio Songs recorded on this instrument are saved in this format. The maximum amount of time for playing an audio Song is 80 minutes. Refer to the table on page 23 for details on the Songs. [USB] can be selected only when a USB flash memory is connected. NOTE When you want to play a Song saved to a USB flash memory, read the section “Handling a USB Flash Memory” (page 28), then connect the USB flash memory to the [USB TO DEVICE] terminal. Press the [-/NO] and [+/YES] to select a Song number, Scene number, “rnd” or “ALL”. Plays all the Songs continuously in sequence. Play all Preset Songs in each scene continuously, when the [PRESET 1] or [PRESET 2] is selected. Select a Song number and play only the selected Song. About the Song number, refer to page 23. NOTE You can play the keyboard along with the Preset Songs. You can also change the Voice playing on the keyboard. NOTE The tempo of Piano Preset Songs (Classic & Jazz) and Songs in the USB flash memory cannot be adjusted. The default tempo is automatically selected whenever a new Song is selected. Scene The 50 Piano Preset Songs (Classic & Jazz) have been divided into twenty three groups or categories, to match a variety of listening preferences and to let you select your favorite Songs based on a scene description. For instance, if you want to listen to some “Elegant” Songs, select scene number 4. The Songs that match that category will play sequentially. For a list of the 50 Piano Preset Songs (Classic & Jazz), see page 39. NOTE When you select a different Song (or a different Song is selected during chained playback), an appropriate Reverb Type will be selected accordingly. [. . . ] Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a “minus” screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the AC IN and an AC wall outlet. [. . . ]