User manual YAMAHA GX-505RDS

[. . . ] GB DISC1 DISC2 DISC3 DISC CHANGE OPEN/CLOSE 3­DISC CD CHANGER DIGITAL AUDIO STANDBY STANDBY /ON YMERSION B. BOOST MUSIC TIMER VOLUME INPUT PRESET/TUNING/BAND A/B/C/D/E / UP DOWN PTY SELECT R. D. S MINI COMPONENT SYSTEM GX­505 DIRECTION OPEN/CLOSE AUTO REVERSE CASSETTE DECK DOLBY B NR Unpacking Déballage Auspacken Uppackning Disimballaggio Desembalaje Uitpakken q q q q q q q q After unpacking, check that the following parts are contained. q Après le déballage, vérifier que les pièces suivantes sont incluses. q Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind. q Kontrollera efter det apparaten packats upp att följande delar finns med. [. . . ] M LIGHT M CLASSICS OTHER M Light entertainment Pops Rock Middle of the road music (easy-listening) Light classics Serious classics Other music 2 DISC3 DISC CHANGE OPEN/CLOSE s Changing the RDS modes When an RDS station is received by pressing FREQ PS/ PTY/RT/CT once or more, you can change the display among the RDS modes provided by the received station in the order shown on the next page. (The RDS mode not provided by the station cannot be selected. ) Notes DIGITAL AUDIO YMERSION B. BOOST MUSIC VOLUME A/B/C/D/E / UP DOWN LECT D. S REC/ PAUSE AUTO/ MANUAL MEMORY FREQ PS/ PTY/RT/CT RANDOM MODE ­ PTY SEEK ­ START REPEAT TIME DISPLAY TIMER TIME ADJ HOUR MIN · If the received station is not an RDS station, pressing FREQ PS/PTY/RT/CT displays "NO RDS" on the display, and then it returns to the frequency display mode. · When an RDS station is received, the display is automatically turned into the PS mode. Do not press FREQ PS/PTY/RT/ CT until the display is turned into the PS mode. If the button is pressed before the display mode changes, it may occur that "PS WAIT" appears on the display. This is because the tuner has not yet received all of the RDS data on the station. FREQ PS/ PTY/RT/CT OPEN/CLOSE E-20 Tuning operation 1 Frequency display mode 2 PS mode 1 Frequency display mode English The frequency of the station being received is displayed. 2 PS (Program Service name) mode The name of the station being received is displayed using characters selected from among 64 Roman Alphabets including the umlaut. * If other characters are used on the PS data, they are replaced by underbars. * "PS WAIT" may flash while the tuner is receiving the data. * If the station does not employ the PS data service, "NO PS" lights up on the display for about 2 seconds and then returns to the frequency display mode. 3 PTY mode FREQ PS/ PTY/RT/CT RANDOM 3 PTY (Program Type) mode The type of the program on the station being received is displayed. In this mode, you can make this unit search for a station which is broadcasting a program of your desired program type. * If the RDS station does not employ the PTY data service, "NO PTY" lights up on the display for about 2 seconds and then returns to the frequency display mode. If the station has PS data, it turns into the PS mode after that. 4 RT mode 4 RT (Radio Text) mode Information about the program on the station being received is displayed. Information is displayed using characters selected from among 64 Roman Alphabets including the umlaut. * If other characters are used on the RT data, they are replaced by underbars. "RT WAIT" may flash while the tuner is receiving the data. * If the RDS station does not employ the RT data service, "NO RT" lights up on the display for about 2 seconds and then returns to the frequency display mode. If the station has PS data, it turns into the PS mode after that. 5 CT mode 5 CT (Clock Time) mode Current time is displayed in the following form. The CT data from the station being received changes every minute. Hour Minute The tuner corrects the time of the built-in clock by synchronizing it with the CT data. (This function can also be canceled, if so desired. Refer to page 23 for details. ) * "CT WAIT" may flash while the tuner is receiving the data. If the data is accidentally cut off, "CT WAIT" may flash and then turn into "NO CT". [. . . ] ACHTUNG Die Verwendung von Bedienungselementen oder Einstellungen oder die Durchführung von Bedienungsvorgängen, die nicht in dieser Anleitung aufgeführt sind, kann zu einem Kontakt mit gefährlichen Laserstrahlen führen. OBSERVERA Användning av kontroller och justeringar eller genomförande av procedurer andra än de som specificeras i denna bok kan resultera i att du utsätter dig för farlig strålning. ATTENZIONE Uso di controlli o regolazioni o procedure non specificamente descritte può causare l'esposizione a radiazioni di livello pericoloso. PRECAUCIÓN El uso de los controles o los procedimientos de ajuste o utilización diferentes de los especificados en este manual pueden causar una exposición peligrosa a la radiación. [. . . ]