User manual YAMAHA HTR-5830

[. . . ] U HTR-5830 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 12 13 1 2 3 4 5 6 7 8 9 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] ­ When headphones are connected to the PHONES jack. · The 6. 1/5. 1 setting resets to AUTO when you turn the unit power off. VCR V-AUX DTV/CBL DVD MD/CD-R TUNER CD VOLUME PL PRO LOGIC dB L R The display cycles as follows each time you press q/ DTS: PRO LOGICPRO LOGIC EnhancedPRO LOGIC II MoviePRO LOGIC II MusicPRO LOGIC. . . . y · You can select PRO LOGIC, PRO LOGIC Enhanced, PRO LOGIC II Movie, and PRO LOGIC II Music by pressing PROGRAM l / h on the front panel repeatedly. 28 PLAYBACK With Virtual CINEMA DSP, you can enjoy all sound field programs without surround speakers. It creates virtual speakers to reproduce a natural sound field. You can listen to virtual CINEMA DSP by setting "1C SURR" in the set menu to NON. Sound field processing changes to Virtual CINEMA DSP automatically. I Virtual CINEMA DSP Notes · If you turn off the sound effects, no sound is output from the center speaker or surround speakers. · If you turn off the sound effects while the unit is reproducing sound from a Dolby Digital or DTS signal, the dynamic range of the signal is automatically compressed and the unit will mix the sounds of the center and surround speaker channels and output them from the front speakers. · The volume may be greatly reduced when you turn off the sound effects or if you set "SOUND 4 D. RANGE (dynamic range)" on the set menu to MIN. In this case turn on the sound effect. Note · Virtual CINEMA DSP will not activate, even when 1C SURR is set to "NONE" (see page 42) in the following cases: ­ When the 5ch Stereo, DOLBY DIGITAL, Pro Logic, Pro Logic II, or DTS program is selected. ­ When the sound effect is turned off. ­ When 6CH INPUT is selected as the input source. ­ When a digital signal with a sampling frequency greater than 48 kHz is input to this unit. ­ When connecting the headphones. y · During stereo reproduction, you can display information such as the type, format and sampling frequency of the signal input from the components connected to this unit. (While playing a source) I To listen with headphones (SILENT CINEMA) The SILENT CINEMA mode allows you to enjoy multichannel music or movie sound, including Dolby Digital and DTS surround, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs. The "SILENT CINEMA" indicator lights up on the front panel display. (If the sound field programs are off, you listen with normal stereo reproduction. ) 1 2 Press AMP. Press u / d to display the information about the input signal. BASIC OPERATION ­ SELECT + PRESET/CH Notes · This feature is not available when 6CH INPUT is selected or the unit is receiving a digital signal with a sampling frequency greater than 48 kHz. · The sound from the LFE channel will be mixed and output from the headphones. I Normal stereo reproduction Press STEREO to turn off the sound effect for normal stereo reproduction. Press STEREO again to turn the sound effect back on. STEREO STEREO or EFFECT ENTER (Format): The display shows the signal format. When the unit cannot detect a digital signal it automatically switches to analog input. in: The display shows the number of input signal source channels, as follows: For multi-channel soundtrack such as front 3 channels, surround 2 channels and LFE, the display shows "3/2/ LFE". fs: The display shows the sampling frequency. [. . . ] and Europe models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V/50 Hz [Korea model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V/60 Hz [China model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V/50 Hz [Asia and General models] . . . [. . . ]