User manual YAMAHA HTR-6050

[. . . ] U HTR-6050 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS Important safety instructions 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols 12 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 13 1 2 3 4 5 6 7 8 9 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] Recording of copyrighted material may infringe copyright laws. BASIC OPERATION y Do a test recording before you start an actual recording. If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals. 1 2 Turn on all the connected components. Press D INPUT l / h repeatedly (or press one of the input selector buttons (C)) to select the source component you want to record from. 3 4 Start playback on the selected source component or select a broadcast station. Start recording on the recording component. English 45 En SET MENU SET MENU You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Auto setup AUTO SETUP Use this feature to automatically adjust speaker and system parameters (see page 24). Manual setup MANUAL SETUP Use this feature to manually adjust speaker and system parameters. Sound menu 1 SOUND MENU Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or compensate for video signal processing delays when using LCD monitors or projectors. Parameter Features Selects the size of each speaker, the speakers for low-frequency signal output, and the crossover frequency, and the location of the front speakers connected to the FRONT B terminals. Adjusts the output level of each speaker. Adjusts the tonal quality of the center speaker. Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. Adjusts the dynamic range of Dolby Digital or DTS signals. Adjusts the muting level, audio delay, maximum volume level and initial volume level. Page A)SPEAKER SET B)SP LEVEL C)SP DISTANCE D)CENTER GEQ E)LFE LEVEL F)D. RANGE G)AUDIO SET 48 50 50 51 51 51 51 Input menu 2 INPUT MENU Use this menu to manually reassign the input jacks, select the input mode or rename the input source. Parameter Features Assigns the input jacks of this unit according to the component to be used. Adjusts the output volume of each input source. Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the rear panel of this unit. Selects the video source played in the background of the sources input from the MULTI CH INPUT jacks. Page 52 53 53 53 A)INPUT ASSIGN B)INPUT RENAME C)VOLUME TRIM D)DECODER MODE E)MULTI CH SET 54 46 En SET MENU Option menu 3 OPTION MENU Use this menu to manually adjust the optional system parameters. Parameter Features Adjusts the brightness of the front panel display. Locks sound field program parameters and other "SET MENU" settings. Designates the default audio input jack select setting for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Sets all the parameters of the sound field programs to the factory settings. Adjusts the playback style of a USB source. Page 54 55 55 55 55 A)DISPLAY SET B)MEMORY GUARD C)AUDIO SELECT D)PARAM. INI E)USB PLAY STYLE Signal information SIGNAL INFO Use this feature to check audio signal information (see page 35). Using SET MENU Use the remote control to access and adjust each parameter. y You can change the "SET MENU" parameters while this unit is reproducing sound. 3 Press G ENTER to enter "MANUAL SETUP". The "MANUAL SETUP" display appears in the OSD. ;MANUAL SETUP . 1 SOUND MENU 2 INPUT MENU 3 OPTION MENU ADVANCED OPERATION 1 Press D AMP and then press Q MENU to enter "SET MENU". The top "SET MENU" display appears in the OSD. SET MENU TOPAMENU . [. . . ] 57 TV Sports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 ADDITIONAL INFORMATION U UNIT, Speaker distance . . . . . . . . . . . . . . . . . . . . . . . 50 Unit, Speaker distance . . . . . . . . . . . . . . . . . . . . . . . . . 50 Unplug HP!, Auto setup error message . . . . . . . . . . . . . . . . [. . . ]