User manual YAMAHA HTR-6140

[. . . ] U HTR-6140 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols 12 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 13 1 2 3 4 5 6 7 8 9 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] · The HOLD indicator flashes in the front panel display while you are holding the SIRIUS information. Press 8 ENTER again or change the SIRIUS Satellite Radio channel to release the held information. When an information is unavailable, "­­­­" appears. ANTENNA INFO e. g. ) 043 ANTENNA - Channel number/Antenna reception level DSP PROG. INFO Sound field program e. g. ) 5ch Enhancer Back to "CHANNEL INFO" 56 En USING IPODTM Using iPodTM Once you have stationed your iPod in a Yamaha iPod universal dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 19), you can enjoy playback of your iPod using the supplied remote control. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts (such as the MP3 format) stored on your iPod (see page 19). Notes · Only iPod (Click and Wheel), iPod nano, and iPod mini are supported. · Some features may not be compatible depending on the model or the software version of your iPod. y · For a complete list of status messages that appear in the front panel display and in the OSD, see the "iPod" section in "Troubleshooting" on page 85. · Once your iPod is stationed in a Yamaha iPod universal dock, this unit begins signal transmission with your iPod. · Once the connection between your iPod and this unit is complete, "iPod connected" appears in the front panel display and the DOCK indicator lights up in the front panel display. · Only the analog audio and video signals of your iPod are input at the DOCK terminal, and the analog audio signals can be output at the analog AUDIO OUT (REC) jacks for recording. · Your iPod battery is automatically charged when your iPod is stationed in a Yamaha iPod universal dock connected to the DOCK terminal of this unit as long as this unit is turned on. BASIC OPERATION Controlling iPodTM You can control your iPod when "V-AUX" is selected as the input source. The operations of your iPod can be done with the aid of the OSD of this unit (menu browse mode) or without it (simple remote mode). Remote control operation Before performing the following operations, press 4 V-AUX/DOCK. Button 8 ENTER k n l h 0 ll hh b a e p M MENU O DISPLAY Controlling iPod in the simple remote mode You can perform the basic operations of your iPod (play, stop, skip, etc. ) using the supplied remote control without the aid of the OSD of this unit. y · You can view the photos or video clips stored on your iPod (some models only). · Operations can be also done with the controls on your iPod. Function Subsequent menu Menu up Menu down Previous menu Subsequent menu Search backward (Press and hold) Search forward (Press and hold) Skip backward Skip forward Pause (Menu browse mode) Play/Pause (Simple remote mode) Play (Menu browse mode) Play/Pause (Simple remote mode) Previous menu Display English 57 En Using iPodTM Controlling iPod in the menu browse mode You can perform the advanced operations of your iPod using the supplied remote control when you connect this unit and a monitor using the VIDEO connection. You can browse the songs stored on your iPod in the OSD. Further, you can change or adjust settings for your iPod to suit your personal preferences. y · The name of the song being played also appears in the front panel display according to the "FL SCROLL" parameter in "OPTION MENU" (see page 70). · You can select the amount of time the iPod menu and play information is displayed in the OSD by using the "OSD-SOURCE" in "OPTION MENU" (see page 70) Shuffle Shuffle Use this feature to set this unit to play songs or albums in random order. Choices: Off, Songs, Albums · Select "Off" to deactivate this feature. · Select "Songs" to set this unit to play songs in random order. · Select "Albums" to set this unit to play albums in random order. [. . . ] 72 XM Mini-Tuner Dock . . . . . . . . . . . . . . . . . . . . . . . . . 46 XM Radio antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 XM Radio antenna, XM Radio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 XM Radio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]