User manual YAMAHA KB200

[. . . ] This product may also use "household" type batteries. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Mismatches or incorrect installation may result in overheating and battery case rupture. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. [. . . ] Also, in this state only buttons related to file functions will be active. NOTE · The FILE CONTROL display will not appear in any of the following cases: · During pattern or song playback · While data is being loaded from a USB storage device root MM6/KB200 Owner's Manual 67 Storing/Saving Data Formatting a USB storage device A new USB storage device must be formatted before it can be used by this instrument. CAUTION · If you format a USB storage device that already contains data, all of the data will be erased. Be careful not to erase important data when using the format function. 3 Press [EXECUTE] button and a confirmation message will appear. You can press the [DEC/NO] button at this point to cancel the operation. 1 After connecting the USB storage 4 Press the [EXECUTE] button again, or the [INC/YES] button, and the format operation will begin. CAUTION · Once the format-in-progress message appears on the display the format operation cannot be canceled. Never turn off the power or remove the USB storage device during this operation. device to be formatted to the instrument's USB TO DEVICE terminal, check that "CONNECT" is showing in the MAIN display. 2 Press the [MENU] button. A message will appear asking you to confirm the format operation. NOTE · If the Load item appears in step 2, press the CATEGORY [INC] / [DEC] buttons as many times as necessary until the Format item appears. 5 A message will appear on the display when the operation is complete. Press the [EXIT] button to return to the MAIN display. NOTE · If the USB storage device has been write-protected, an appropriate message will appear on the display and you will not be able to execute the operation. 68 MM6/KB200 Owner's Manual Storing/Saving Data Saving Data Three types of data are saved to one " User File" by this operation: user song, pattern file, and performance memory data. 1 Make sure that a appropriately format- ted USB storage device has been properly connected to the instrument's USB TO DEVICE terminal, and that "CONNECT" is showing in the MAIN display. Cursor left Cursor right Delete character Select characters 2 Press the [MENU] button. 3 Use the CATEGORY [DEC] and [INC] but- tons to locate the User File Save item. A default file name will automatically be created. Cursor Settings for alphabetic and numeric characters: ABCDEFGH I JKLMNOPQRST f gh i j k lmn UVWXYZ a b c d e opq r s t uvwxyz01234567 ' ( )^@ { } _ ` To Overwrite an Existing File If you want to overwrite a file that already exists on the USB storage device, use the dial or the [INC/YES] and [DEC/NO] buttons to select the file, then skip ahead to step 6. NOTE · If the USB storage device has been write-protected, an appropriate message will appear on the display and you will not be able to execute the operation. · If there is not enough capacity left on the USB storage device to save the data, an appropriate message will appear on the display and you will not be able to save the data. Erase unwanted files from the USB storage device to make more memory available (page 72), or use a different USB device. · Refer to the "Messages" list on page 83 for other possible errors that might prevent you from completing the operation. 89 ! # $%& 6 Press the [EXECUTE] button. A confirmation message will appear on the display. You can press the [DEC/NO] button at this point to cancel the operation. 7 Press the [EXECUTE] button again, or the [INC/YES] button, and the save operation will begin. Save important data to a USB storage device before loading data that will overwrite it. · Pattern files created on other Yamaha keyboards ("sty" file extension only) can be loaded into MM6/KB200 User Pattern No. Pattern files cannot be created using the MM6/KB200. 4 Use the dial to select the user file or pattern file you want to load. All user files in the USB storage device will be displayed first, followed by the pattern files. NOTE · Pattern files must be located in the root directory. Pattern files located within folders will not be recognized. 1 With the USB storage device containing the file you want to load connected to the USB TO DEVICE connector, check that "CONNECT" is showing in the MAIN display. Press the [MENU] button. 5 Press the [EXECUTE] button. A confirmation message will appear on the display. You can press the [DEC/NO] button at this point to cancel the operation. 2 3 Use the CATEGORY [DEC] / [INC] buttons to locate the Load item. 6 Press the [EXECUTE] button again, or CAUTION the [INC/YES] button, and the load operation will begin. · Once the load-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB storage device during this operation. 7 A message will appear on the display when the operation is complete. Press the [EXIT] button to return to the MAIN display. NOTE · The SMF saved to a USB storage device can not be loaded as a user song. MM6/KB200 Owner's Manual 71 Storing/Saving Data Deleting Data from a USB Storage Device This procedure deletes selected user files and SMF files from a USB storage device. 1 Make sure that the USB storage device containing the file(s) you want to delete has been properly connected to the instrument's USB TO DEVICE terminal, and that "CONNECT" is showing in the MAIN display. 4 Select the file you want to delete. You can press the [INC/YES] and [DEC/NO] buttons simultaneously to select the first song or user file on the USB storage device. 5 Press the [EXECUTE] button. A confirmation message will appear on the display. You can press the [DEC/NO] button at this point to cancel the operation. 2 Press the [MENU] button. 3 Use the CATEGORY [DEC] and [INC] buttons to locate the Delete item. 6 Press the [EXECUTE] button again, or the [INC/YES] button, and the delete operation will begin. CAUTION · Once the delete-in-progress message appears in the display, the operation cannot be canceled. [. . . ] This warranty is applicable to all models included in the following series of products: MUSIC SYNTHESIZER MM6/KB200 If during the first 90 days that immediately follows the purchase date, your new Yamaha product covered by this warranty is found to have a defect in material and/or workmanship, Yamaha and/or its authorized representative will repair such defect without charge for parts or labor. If parts should be required after this 90 day period but within the one year period that immediately follows the purchase date, Yamaha will, subject to the terms of this warranty, supply these parts without charge. However, charges for labor, and/or any miscellaneous expenses incurred are the consumers responsibility. Yamaha reserves the right to utilize reconditioned parts in repairing these products and/or to use reconditioned units as warranty replacements. [. . . ]