User manual YAMAHA KX-W10

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 9 Heat -- The appliance should be situated away from heat ÷ Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. sources such as radiators, stoves, or other appliances that produce heat. 10 Power Sources -- The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11 Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying attention to receptacles, and the point where they exit from the appliance. 12 Cleaning -- The appliance should be cleaned only as recommended by the manufacturer. WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. 13 No Use Periods -- The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 14 Object and Liquid Entry -- Care should be taken so that 1 Read Instructions -- All the safety and operating instructions should be read before the appliance is operated. 2 Retain Instructions -- The safety and operating instructions should be retained for future reference. objects do not fall into and liquids not spilled into the inside of the appliance. 15 Damage Requiring Service -- The appliance should be serviced by qualified service personnel when: A. [. . . ] The deck enters the rec pause mode. Play the program source to be recorded and adjust the recording level and balance. Recording starts. 11 Digital Super Surround (DSS) setting (in step 3) The DSS function can be utilized also for recording. Press the DSS MODE button to turn on the DSS function, and select one of the DSS programs by pressing the DSS button so that the corresponding indicator lights up. By recording with this function, you can enjoy the sources with your preferred DSS effect even when played back on car audios or portable headphone stereo systems. DOLBY NR selector setting (in step 4) Set the DOLBY NR selector according to your purpose. B: For recording the sources with Dolby B NR. C: For recording the sources with Dolby C NR. ÷ Dolby noise reduction is an extremely effective method of reducing undesirable background hiss on tapes. This unit incorporates both Dolby B NR and the newer Dolby C NR system. Dolby C NR is approximately twice as effective as the earlier Dolby B NR. REVERSE MODE selector setting (in step 5) The auto reverse function allows the tape running direction to be reversed automatically. Select an auto reverse mode ("), manual reverse mode (") or RELAY recording mode. ": When recording on one side of a tape is finished, the deck stops at the end of the tape. The tape then stops in both cases. 13 REC/PAUSE s DECK A/B PLAY DECK A DECK B REC BALANCE/LEVEL DUAL RECORDING - To record a program source on both decks simultaneously To make the same tapes, use tapes of identical length. 7 Press the DECK A/B button to select DECK B. DECK A/B 1 2 Insert cassette tapes in both DECKs A and B. Press the DECK A/B button to select DECK A. DECK A/B The DECK B indicator lights on the display. The DECK A indicator lights on the display. 8 Press the REC/PAUSE button to enter the rec pause mode. REC/PAUSE 3 Perform steps 3 through 5 of "Basic operation" to adjust the DSS, DOLBY NR and REVERSE MODE settings. For dual recording, Set the MODE selector to " or " position. Select the tape running direction for both decks by pressing the DIRECTION A and B buttons. DIRECTION A B The tape running direction indicator of the corresponding deck (forward # or reverse @) lights on the display. The REC indicator of the DECK B lights. 4 9 To start recording, press the PLAY button. PLAY 5 Press the REC/PAUSE button to enter the rec pause mode. REC/PAUSE Both decks start recording simultaneously. Once the dual recording starts, pressing the REC/ PAUSE or STOP button or perfoming the REC RETURN/REC MUTE operation affects both decks simultaneously. To stop recording in the middle of the tape Press the STOP button of both decks on the front panel simultaneously. If the STOP button of one deck is pressed, the other continues recording. The REC indicator of the DECK A lights. 6 Play the program source to be recorded and adjust the recording level and balance. BALANCE 1 2 3 4 L5 0 1 2 3 4 5R 3 2 1 0 10 REC LEVEL 4 5 6 7 8 9 Recording level for both decks is adjusted to the same level. 14 REC/PAUSE s DECK A/B PLAY MODE DECK A DECK B REC BALANCE/LEVEL RELAY RECORDING - To record a program source sequentially on DECK A and DECK B Recording can be made sequentially on DECKs A and B. Start the relay recording always from the cassette in DECK A. 6 Press the REC/PAUSE button to enter the rec pause mode. REC/PAUSE 1 2 Insert cassette tapes in both DECKs A and B. Press the DECK A/B button to select DECK A. DECK A/B The REC indicator of the DECK A lights. The DECK A indicator lights on the display. 7 Play the program source to be recorded and adjust the recording level and balance. BALANCE 1 0 1 2 3 4 5R 3 2 1 0 10 3 4 Perform steps 3 and 4 of "Basic operation" to adjust the DSS and DOLBY NR settings. Set the MODE selector to RELAY position. " MODE " RELAY REC LEVEL 4 5 6 7 8 9 2 3 4 L5 = 5 8 Select the tape running direction for both decks by pressing the DIRECTION A and B buttons. DIRECTION A B The tape running direction indicator of the corresponding deck (forward # or reverse @) lights on the display. Recording level for both decks is adjusted to the same level. To start recording, press the PLAY button. PLAY To record on both sides of the tapes, rewind them to the beginning of the forward side and select forward (#) with the DIRECTION A and B buttons respectively. [. . . ] 0. 08% W. Peak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0. 15% Signal-to-Noise Ratio (Dolby NR off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 dB (Dolby B NR on) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 dB (Dolby C NR on) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]