User manual YAMAHA LG-8

[. . . ] â· Use only the bolts provided when assembling the stand. Use of any other bolts may result in an inadequate assembly that may cause damage to both the keyboard and the stand. â· Be careful around pipe ends, inside and bolt ends. [. . . ] â· Protect the floor by placing a mat or area rug underneath the stand. The stand may damage the floor after being used for an extended period of time. â· Use the stand only after assembly is complete. Do not apply excessive force to the keyboard, as it may cause the stand to overturn or the keyboard to drop. â· Make sure the stand is sturdy and safe, and that all bolts have been securely tightened before use. If not, the stand may overturn, causing damage to the keyboard or injury to the user. * Before setup, make sure that you have all of the items listed below. When the leg parts are attached to the upper part so that the height of the stand is at its lowest, the keyboard height of any of Yamaha's 88-key synthesizers put on the stand will be almost the same as the keyboard height of an acoustic piano. When attaching the leg parts to the upper part, set the leg parts to the location for attachment by hand, then secure the bolt. Be careful, since the leg parts may drop, pinching or causing injury to hands or fingers. â· Watch your fingers when adjusting bolts or the height of the stand. They may become pinched, resulting in injury. â· Make sure all bolts are secured firmly. Loose bolts may result in the rack overturning or in parts dropping, causing injury. [. . . ] â· Make sure all bolts are secured firmly. Loose bolts may result in the rack overturning or in parts dropping, causing injury. You can extend the width until the stopper sticks out from the pipe's hole. [. . . ]