User manual YAMAHA LS9

[. . . ] LS9-16/LS9-32 Owner's Manual EN FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. [. . . ] You can select the following signals as the monitor source. · · · · · STEREO channel output signal MONO channel output signal STEREO + MONO channel output signal 2TR IN DIGITAL jack input signal INPUT channels 15/16 {31/32} input signal · USB memory recorder output signal · Any combination of up to eight signals from the STEREO, MONO, MIX, and MATRIX channels, the USB memory recorder output signal, INPUT channel 15/ 16 {31/32}, and the 2TR IN DIGITAL jack input signal The Cue function lets you check an individual selected channel by temporarily sending it from the output jacks assigned to the MONITOR OUT channel or from the PHONES OUT jack. When you press the top panel [CUE] key, the cue signal of the corresponding channel is sent as the monitor output from the selected output port. NOTE · The cue signal is sent to the same output destination as the monitor signal. Be aware that for this reason, the cue signal will no longer be sent to the connected monitor speakers if you turn off the Monitor output. However, the cue signal will always be sent to the PHONES OUT jack. CUE LR CUE TRIM (INPUT/OUTPUT/DCA) PHONES OUT LR MONO METER CUE L METER CUE R CUE LOGIC 2 DA Tip Ring Sleeve PHONES LEVEL [PHONES] CUE L CUE R PHONES LEVEL LINK PHONES L PHONES R To PHONES OUT To PHONES OUT 2TRD L, R INPUT 15, 16{31, 32} PLAYBACK OUT MONITOR SELECT 2TRD L, R INPUT 15, 16{31, 32} PLAYBACK OUT MONITOR R MONITOR MONO(C) METER MONITOR R METER MONITOR MONO(C) DIMMER STEREO OUT L, R STEREO OUT MONO(C) STEREO OUT L, C, R MONITOR L MONO METER MONITOR L MONITOR OUT L MONITOR OUT R MONITOR OUT MONO(C) To OUTPUT PATCH To OUTPUT PATCH To OUTPUT PATCH STEREO OUT L, R STEREO OUT MONO(C) MIX OUT1-16 MATRIX OUT1-8 DEFINE MIX (MAX:8ch) ON TALKBACK ON MONITOR DIMM ON +MONO(C) MONITOR LEVEL MONITOR SELECT MONITOR LEVEL Selects the monitor source. METER Detects and indicates the level of the monitor signal or cue signal. DIMMER Adjusts the level of the monitor/cue signal. This affects the output jacks that are assigned to the MONITOR OUT L/R/C channels, and also the PHONES OUT jack. ON (On/off) Turns the monitor output on/off. PHONES LEVEL (Headphone level) Attenuates the monitor/cue signal by a fixed amount. Adjusts the output level of only the PHONES OUT jack. LS9-16/32 Owner's Manual 145 Monitor/Cue The following diagram shows the monitor/cue signal flow. 14 Using the Monitor function Using the Monitor function This section explains how to select the desired monitor source, and monitor it from the PHONES OUT jack or external monitor speakers. 1 Connect your monitor system to the rear panel OMNI OUT jacks, 2TR OUT DIGITAL jack, or an I/O card installed in a slot. The monitor signal can be sent to any desired output jack or output channel. If you're monitoring through headphones, make sure that your headphones are connected to the front panel PHONES OUT jack. E MONITOR LEVEL knob Adjusts the output level of the monitor signal. F DIMMER field The Dimmer function which temporarily attenuates the monitor signal can be switched on/off here. Use the knob in this field to adjust the amount of attenuation. G TALKBACK DIMMER field If Talkback is enabled, this will indicate the on/off status of the Talkback Dimmer function which automatically attenuates the monitor signal. Here you can also specify the amount of attenuation applied by the talkback dimmer. H Meter field This indicates the level of the monitor signal. This meter shows the level immediately before the dimmer. If you move the cursor to the port select box located below the level meter and press the [ENTER] key, a popup window will appear, allowing you to select the port that will output the monitor signal. 8 2 In the DISPLAY ACCESS section, press the [MONITOR] key repeatedly to access the MONITOR screen. In the MONITOR screen you can check the current monitor settings, and turn monitoring on/off. The screen contains the following items. 2 9 61 57 4 I MONO MONITOR button This button allows monaural monitoring. If this button is on, the signal sent from the PHONES OUT jack and the MONITOR OUT L/R channels will be monaural. HINT 3 · If the normal dimmer and the talkback dimmer are both switched on simultaneously, the setting with the greatest amount of attenuation will be applied. 1 OUTPUT button Turns the monitor output on/off. B SOURCE SELECT field Use the buttons in this field to select the monitor source. 3 Use the buttons of the SOURCE SELECT field to select a monitor source. In the SOURCE SELECT field you can select only one monitor source. However if you've selected DEFINE, you can use the ASSIGN field to specify multiple monitor sources. The following table shows the monitor sources you can select in the SOURCE SELECT field. ST L/R button MONO button 2TR L/R button LCR button IN 15/16 {31/32} button PLAYBACK OUT button DEFINE button STEREO L/R channel output signal MONO channel output signal 2TR IN DIGITAL jack input signal STEREO L/R + MONO channel (LCR) output signal INPUT channels 15/16 {31/32} input signal USB memory recorder playback signal The signal(s) selected in the ASSIGN field C ASSIGN field If you selected DEFINE in the SOURCE SELECT field, use this field to specify the monitor source. You can select up to eight monitor sources simultaneously. If you want to clear all selections, move the cursor to the CLEAR ALL button and press the [ENTER] key. D PHONES LEVEL LINK button If this is on, the MONITOR LEVEL knob will adjust the level of the signal sent to the PHONES OUT jack. 146 LS9-16/32 Owner's Manual Using the Monitor function If you've selected DEFINE in the SOURCE SELECT field, you can use the ASSIGN field to select multiple sources. The following table shows the monitor sources you can select in the ASSIGN field. MIX 1­16 buttons MATRIX 1­8 buttons STEREO L/R button MONO button 2TR L/R button INPUT 15/16 {31/32} button PLAYBACK OUT button MIX channels 1­16 output signals MATRIX buses 1­8 output signals STEREO L/R channel output signal MONO channel output signal 2TR IN DIGITAL jack input signal INPUT channels 15/16 {31/32} input signal USB memory recorder playback signal 6 To output the monitor signal, move the cursor to the OUTPUT button of the MONITOR screen and press the [ENTER] key to turn it on. The monitor source you selected in step 3 will be sent to the output destination you specified in step 5. HINT · The PHONES OUT jack will always output the monitor signal, regardless of whether the OUTPUT button is on or off. 7 Move the cursor to the MONITOR LEVEL NOTE knob in the MONITOR screen, and use the dial or the [DEC]/[INC] keys to adjust the monitor level. If PHONES LEVEL LINK is ON, you can use both the MONITOR LEVEL knob and the front panel PHONES LEVEL control to adjust the monitor level when monitoring through headphones. HINT · You can select a maximum of eight monitor sources in the ASSIGN field. [. . . ] Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 POLAND Yamaha Music Central Europe GmbH Sp. z. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-868-07-57 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]