User manual YAMAHA MCR-140

[. . . ] G MCR-040/140 MICRO COMPONENT SYSTEM MICRO-CHAINE OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ Printed in China WS48510 CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. [. . . ] Make sure that the source is set securely. € MCR-140: When you select an iPod as the input source, you need to set the iPod in the charging cradle on the unit. IPod: When you select the iPod as a source, this unit resumes the music that you were listening to last time. If you set the track/file number which is not exist, the first track/file is played back automatically. If you set a file number that does not exist, the first file is played back automatically. By selecting “– –”, the FM station you set last time is set. When the timer is on, the TIMER indicator lights up on the front panel display (☞ P. 12 En USING USEFUL FUNCTIONS Using timer and sleep timer ■ Using the timer The timer sets the unit to play back music at the time you set. The unit is set to standby mode after the specified running time elapses. To use the timer, set the appropriate input source securely and set the timer in the setup menu in advance (☞ P. Each time you press TIMER while the power is on, it switches on/off. When you switch on the timer, the TIMER indicator lights up on the front panel display (☞ P. To turn on the unit via the timer, set this unit to standby mode when the timer is switched on. notes • The clock has to be set in advance. € When the unit is in standby mode, the TIMER indicator does not light up on the front panel display even if the timer is on. € After the unit is operated via the timer, the timer function switches off. Y • To activate the timer function again, press TIMER while the power is on. € The timer setting is saved for convenient use next time. – Using sleep timer The sleep timer sets the unit to the standby mode after the specified time elapses. The SLEEP indicator lights up on the front panel display (☞ P. English 13 En ADDITIONAL INFORMATION TROUBLESHOOTING Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. [. . . ] The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha. The following are excluded from this guarantee: a. Periodic maintenance and repair or replacement of parts due to normal wear and tear. [. . . ]