User manual YAMAHA MOTIF6-MOTIF7-MOTIF8 VERSION 1.7 NEW FUNCTIONS

[. . . ] New Functions in MOTIF6/MOTIF7/MOTIF8 Version 1. 7 Yamaha has updated the firmware of the MOTIF6/MOTIF7/MOTIF8 as Version 1. 7. This version provides the additional functions listed below. Zone Switch setting in the Master mode Owner's Manual on page 270 In the previous version of the MOTIF, the Zone Switch setting (page 270) in the Master mode (page 268) was available only when the Mode is set to "Voice" or "Performance. " Version 1. 7 lets you set the Zone Switch parameter also when the Mode is set to "Song" or "Pattern. " This means that you can use the MOTIF as a master keyboard for controlling up to four zones in the Song and Pattern modes as well (even when the tone generator block is set to Multi Timbral mode). [. . . ] "Cakewalk" is changed to "SONAR. " SQ01 When the template is set to "SQ01" the following functions can be controlled by the MOTIF. These control the track selected via the NUMBER [1] - [16] buttons. Set via [CONTROL FUNCTION] Each parameters 1st row 2nd row 3rd row 4th row CS1 PAN PAN PAN PAN CS2 SEND1 EQLo Freq EQMidLo Freq EQHi Freq CS3 SEND2 EQLo Gain EQMidLo Gain EQ3Hi Gain CS4 SEND3 EQLo Q EQMidLo Q EQ3Hi Q Each parameters SONAR2/Cakewalk ProAudio Ver9. 0 When the template is set to "SONAR, " the following functions can be controlled by the MOTIF. These control the track selected via the NUMBER [1] - [16] buttons. Set via [CONTROL FUNCTION] 1st row 2nd row 3rd row 4th row CS1 PAN ------CS2 SEND1 ------CS3 SEND2 ------CS4 SEND3 ------- These control the four tracks selected via the NUMBER [1] - [16] buttons. Selected tracks VOLUME (5th row) 1~4 5~8 9 ~ 12 13 ~ 16 SEQ TRANSPORT These control the four tracks selected via the NUMBER [1] - [16] buttons. CS4 VOLUME4 VOLUME8 VOLUME12 VOLUME16 SEQ TRANSPORT CS1 VOLUME1 VOLUME5 VOLUME9 VOLUME13 CS2 VOLUME2 VOLUME6 VOLUME10 VOLUME14 CS3 VOLUME3 VOLUME7 VOLUME11 VOLUME15 Selected tracks VOLUME (5th row) 1~4 5~8 9 ~ 12 13 ~ 16 CS1 VOLUME1 VOLUME5 VOLUME9 VOLUME13 CS2 VOLUME2 VOLUME6 VOLUME10 VOLUME14 CS3 VOLUME3 VOLUME7 VOLUME11 VOLUME15 CS4 VOLUME4 VOLUME8 VOLUME12 VOLUME16 These control PLAY, STOP, G, H of the computer sequence software. When the [MUTE] button on the MOTIF is turned on, the NUMBER [1] - [16] buttons control the track mute settings of the computer sequence software. When the [TRACK SELECT] button on the MOTIF is turned on, the NUMBER [1] - [16] buttons select the track of the computer sequence software. Control PLAY, STOP, G, H of the computer sequence software. When the [MUTE] button on the MOTIF is turned on, the NUMBER [1] - [16] buttons control the track mute settings of the computer sequence software. When the [TRACK SELECT] buttons on the MOTIF is turned on, the NUMBER [1] - [16] buttons select the track of the computer sequence software. TRACK MUTE TRACK SELECT TRACK MUTE TRACK SELECT Additional Initialize parameter for song/pattern mixing -- GM Owner's Manual on page 212 "GM" (General MIDI) is added as a parameter to be initialized on the INIT display in the Song/Pattern Mixing mode. If the GM check box and the desired parts are marked, executing the Initialize will set the voice banks of the corresponding parts to the GM bank. [. . . ] In the new version, the opposite is the case -- the [TRACK SELECT] button is turned on and the [MUTE] button is off, when the Song/Pattern mode is selected. In the Song/Pattern mode, you can use the [1] - [16] buttons to select the desired track and use the [INC/YES] button, [DEC/NO] button, and the data dial to select a song/pattern. This document is printed on recycled chlorine free (ECF) paper with soy ink. WA54260 209MWAP2. 3-01B0 Printed in Japan [. . . ]