User manual YAMAHA MT8XII

[. . . ] MULTITRACK CASSETTE RECORDER Owner's Manual 1 GAIN GAIN 2 GAIN 3 GAIN 4 5 6 7 8 9-10 11-12 13-14 LINE HIGH MIC LINE HIGH MIC LINE HIGH MIC LINE HIGH MIC HIGH HIGH HIGH HIGH ST-INPUT ST-INPUT ST-INPUT ­12 FREQ +12 ­12 FREQ +12 ­12 FREQ +12 ­12 FREQ +12 ­12 FREQ +12 ­12 FREQ +12 ­12 FREQ +12 ­12 FREQ +12 0 10 0 10 0 10 250 MID 5k 250 MID 5k 250 MID 5k 250 MID 5k 250 MID 5k 250 MID 5k 250 MID 5k 250 MID 5k 1 2 1 2 1 2 3 ­12 LOW +12 ­12 LOW +12 ­12 LOW +12 ­12 LOW +12 ­12 LOW +12 ­12 LOW +12 ­12 LOW +12 ­12 LOW +12 4 3 4 3 4 ­12 AUX 1 +12 ­12 AUX 1 +12 ­12 AUX 1 +12 ­12 AUX 1 +12 ­12 AUX 1 +12 ­12 AUX 1 +12 ­12 AUX 1 +12 ­12 AUX 1 +12 GROUP MASTER TAPE IN 0 AUX 2 10 AUX 2 0 10 AUX 2 0 10 AUX 2 0 10 AUX 2 0 10 AUX 2 0 10 AUX 2 0 10 AUX 2 0 10 0 10 GROUP 1 0 10 MIX LEVEL TO MONITOR TAPE IN TO STEREO 3 GROUP 0 CUE 10 P A N 0 CUE 10 P A N 0 CUE 10 P A N 0 CUE 10 P A N 0 CUE 10 P A N 0 CUE 10 P A N 0 CUE 10 P A N 0 CUE 10 P A N 1 0 10 GROUP 2 L R L E V E L L R L E V E L L R L E V E L L R L E V E L L R L E V E L L R L E V E L L R L E V E L L R L E V E L 2 4 STEREO 0 MIC/ LINE TAPE PAN FLIP 10 TAPE MIC/ LINE 0 MIC/ LINE TAPE PAN FLIP 10 TAPE MIC/ LINE 0 MIC/ LINE TAPE PAN FLIP 10 TAPE MIC/ LINE 0 MIC/ LINE TAPE PAN FLIP 10 TAPE MIC/ LINE 0 LINE TAPE PAN FLIP 10 TAPE LINE 0 LINE TAPE PAN FLIP 10 TAPE LINE 0 LINE TAPE PAN FLIP 10 TAPE LINE 0 LINE TAPE PAN FLIP 10 TAPE LINE 0 10 GROUP 3 CUE MONITOR SELECT NOISE REDUCTION SYSTEM MULTITRACK CASSETTE RECORDER dbx IN MEMO OUT 1 REPEAT TAPE +9 +6 +3 0dB ­3 ­6 ­10 ­20 REC 1 2 3 4 5 6 7 8 +9 +6 +3 0dB ­3 ­6 ­10 ­20 L R ODD EVEN GROUP ASSIGN L R ODD EVEN GROUP ASSIGN L R ODD EVEN GROUP ASSIGN L R ODD EVEN GROUP ASSIGN L R ODD EVEN GROUP ASSIGN L R ODD EVEN GROUP ASSIGN L R ODD EVEN GROUP ASSIGN L R ODD EVEN GROUP ASSIGN 0 10 GROUP 4 MIN MAX MONITOR LEVEL ON OFF SYNC 2 L R AUTO PUNCH TRACK STEREO CUE MIX TO STEREO 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL TAPE SPEED 0 VARI FIX GROUP REC SELECT 1 1 2 2 3 3 4 4 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 5 6 7 8 ­ + AUTO PUNCH I/O RESET RTZ SYNC CLEAR CHECK MEMO 1 LOC 1 REPEAT MEMO 2 LOC 2 REHE 0 REC/PAUSE PLAY REW FF STOP 1 2 3 4 5 6 7 8 STEREO PHONES PUNCH I/O E FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. [. . . ] In Rehearse mode, the REHE indicator lights up, not the REC/PAUSE indicator. 5. At the point where you want to punch out, press the [PLAY] button. The circle around the track indicator flashes. Through the CUE monitor (i. e. , [FLIP] switch in the up position) you'll hear the existing sound playback. 6. Press the [STOP] button to stop playback. The following illustration shows how punch in/out works with the [REC/PAUSE] button. In Point 8 7 6 5 4 3 2 1 Out Point REC SELECT Play PLAY Record REC/PAUSE PLAY Play STOP MT8XII--Owner's Manual 24 Punch In/Out Recording Using the REC SELECT buttons 1. Locate to a position before the point at which you want to punch in. Make sure that all track indicators are off (i. e. , no tracks selected). The REC/PAUSE indicator flashes quickly, indicating Record Pause mode is engaged. Instead of pressing the [REC/PAUSE] button you could have pressed the [REHE] button to engage Rehearse Pause mode. Rehearse allows you to have a dry run before actually recording. The rest of this procedure can be used with the Rehearsal function. Instead of the REC/PAUSE indicator, however, the REHE indicator is used. 4. Press the [PLAY] button to start playback. Playback starts and the PLAY indicator lights up. The REC/PAUSE indicators continue to flash, indicating Play Record Wait mode. At the point where you want to punch in, press a [REC SELECT] button. The REC/PAUSE indicator stop flashing and light up continuously. A circle appears around the corresponding track indicator. If you're monitoring the track via CUE (i. e. , [FLIP] switch in the up position), you'll hear the existing sounds playback until the [REC SELECT] button is pressed. After which you'll hear the new sound that's being recorded. You can punch in more than one track using this technique. However, do not press more than one [REC SELECT] button simultaneously. At the point where you want to punch out, press the [PLAY] button. The circle around the track indicator flashes. Through the CUE monitor (i. e. , [FLIP] switch in the up position) you'll hear the existing sounds playback. [. . . ] So as well as turn up the AUX control, you must also raise the fader. This has the advantage that the level of the processed signal from the external effects processor is controlled in unison with the unprocessed signal that is controlled by the fader. Post-Roll Point--This is the point five seconds after the actual punch out point at which the Auto Punch In/Out sequence ends, and MT8XII rewinds automatically to the pre-roll point. Punch In/Out--A recording technique that allows you to rerecord specific sections of an existing track. [. . . ]