User manual YAMAHA MX49 REMOTE EDITOR

[. . . ] Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] For example, to enter the number 123, press the numeric buttons as shown below. STEREO MUSIC ENTERTAIN Setting XM Satellite Radio preset channels You can use this feature to store up to 40 XM Satellite Radio channels (eight preset numbers in five preset groups, A1 to E8). You can then recall any preset channel easily by selecting the preset group and number as described in "Preset Search mode" on page 51. 1 2 3 The display changes as follows. DVR/VCR2 VCR1 V-AUX SP A DTV/CBL DVD MD/CD-R XM TUNER CD PRESET/TUNING EDIT FM/AM NEXT A/B/C/D/E l PRESET/TUNING/CH h LEVEL MEMORY MAN'L/AUTO FM TUNING MODE AUTO/MAN'L MONO SEARCH MODE XM CATEGORY DISPLAY INPUT <XM> --1 A PROGRAM SPEAKERS B STRAIGHT TONE CONTROL INPUT MODE DVR/VCR2 VCR1 V-AUX SP A DTV/CBL DVD MD/CD-R XM TUNER CD <XM> -12 1 DVR/VCR2 VCR V-AUX SP A 3 4 2, 5 DTV/CBL DVD MD/CD-R XM TUNER TUNED CD <XM>123 4 If you enter fewer than three numbers you may press ENT. to tune to the channel immediately or wait a few seconds to confirm the entered channel number. ENT. Search the XM Satellite Radio channel you want to set as a preset channel. To search the desired channel, carry out "All Channel Search mode" or "Category Search mode" on page 46, or "Direct Number Access mode" on page 51. DVR/VCR2 VCR V-AUX SP A DTV/CBL DVD MD/CD-R XM TUNER TUNED CD [040] Deep Tra When the channel number "040" is selected 2 y · If no button is pressed within a few seconds after entering onedigit or two-digit number, the unit automatically confirms the entered channel number. · Pressing a button other than numeric buttons or ENT. cancels the direct number access procedure. Press MEMORY on the unit (or remote control during the TUNER mode). The MEMORY indicator flashes for about five seconds. MEMORY MAN'L/AUTO FM or Front panel RETURN MEMORY Remote control MEMORY Flashes 52 XM SATELLITE RADIO TUNING 3 While the MEMORY indicator is flashing, press CATEGORY (or A-E/CAT. j / i on the remote control) to select a preset group (A to E). The group letter appears. PRESET/CH TV VOL A/B/C/D/E NEXT or CATEGORY CH TV MUTE ENTER CH TV VOL Front panel DVR/VCR2 VCR V-AUX SP A Remote control DTV/CBL DVD MD/CD-R XM TUNER TUNED CD MEMORY C [040] Deep Preset group 4 While the MEMORY indicator is flashing, press PRESET/TUNING/CH l / h (or PRESET/CH u / d on the remote control) to select a preset number (1 to 8). PRESET/CH TV VOL BASIC OPERATION l PRESET/TUNING/CH h LEVEL or CH TV MUTE ENTER CH TV VOL Front panel DVR/VCR2 VCR V-AUX SP A Remote control DTV/CBL DVD MD/CD-R XM TUNER TUNED CD MEMORY C5 [040] Deep Preset number 5 While the MEMORY indicator is flashing, press MEMORY on the unit (or the remote control) to preset the selected XM Satellite Radio channel. A colon appears next to the preset number for confirmation, and the MEMORY indicator turns off. MEMORY MAN'L/AUTO FM or RETURN MEMORY Front panel DVR/VCR2 VCR V-AUX SP A Remote control DTV/CBL DVD MD/CD-R XM TUNER TUNED CD C5:[040] Deep Colon appears Note Presetting a new channel clears the former preset channel stored in the same preset group and number. 53 XM SATELLITE RADIO TUNING Status and error messages If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Message Cause The XM connect and Play digital antenna accessory is not connected, or does not work properly. Recording of copyrighted material may infringe copyright laws. VOLUME OPTIMIZER MIC PRESET/TUNING EDIT FM/AM NEXT A/B/C/D/E l PRESET/TUNING/CH h LEVEL MEMORY MAN'L/AUTO FM TUNING MODE AUTO/MAN'L MONO SEARCH MODE XIM CATEGORY DISPLAY PROGRAM PHONES SPEAKERS A B INPUT STRAIGHT TONE CONTROL INPUT MODE MULTI CH INPUT PURE DIRECT VIDEO AUX S VIDEO VIDEO L AUDIO R OPTICAL STANDBY /ON EFFECT SILENT CINEMA (U. S. A. model) 1 TRANSMIT RE-NAME CLEAR LEARN 2 SYSTEM 1 POWER STANDBY SLEEP INPUT MODE A B PHONO MULTI CH IN BASIC OPERATION V-AUX TUNER MD/CD-R CD DTV/CBL VCR 1 DVR/VCR2 DVD 2 SELECT 1 2 Turn on the power of this unit and all connected components. Select the source component you want to record from. INPUT A B If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals. PHONO MULTI CH IN V-AUX TUNER MD/CD-R CD or DTV/CBL VCR 1 DVR/VCR2 DVD Special considerations when recording DTS software The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them, the following considerations and adjustments need to be made. For DVDs and CDs encoded with DTS, when your player is compatible with the DTS format, follow its operating instructions to make a setting so that the analog signal will be output from the player. Front panel Remote control 3 4 y Start playback (or select a broadcast station) on the source component. Start recording on the recording component. Do a test recording before you start an actual recording. 55 SOUND FIELD PROGRAM DESCRIPTIONS SOUND FIELD PROGRAM DESCRIPTIONS This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any sound source (stereo or multi-channel). This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience. Most of these sound field programs are precise digital recreations of actual acoustic environments found in famous concert halls, music venues, and movie theaters. y The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set the input mode to AUTO (see page 37) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal. Notes · This unit's DSP sound field programs are recreations of real-world acoustic environments made from precise measurements taken in the actual hall, etc. [. . . ] 42 dB · Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz to 15 kHz, +0. 5, ­2 dB AM SECTION* · Tuning Range [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 to 1710 kHz [General model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]