User manual YAMAHA NE-1

[. . . ] I Names and Functions PARAMETRIC EQUALIZER r t y e OWNER'S MANUAL Thank you for purchasing the YAMAHA NE-1 Parametric Equalizer. Please read this manual thoroughly and keep it in a safe place for future reference. NE-1 I Precautions N To prevent damage, do not use the NE-1 in the following locations: · places where the unit will be in direct sunlight; · places subject to temperature and humidity extremes; · places that are sandy or dusty. [. . . ] N Never use solvents such as benzene or thinner to clean the NE-1. N After reading the owner's manual, keep it in a safe place for future reference. N After tuning is complete, always remove the contact mic from the instrument. Leaving the mic in place for extended periods of time will damage the instruments lacquer finish. w q q Input Jack (INPUT) The input jack for the main unit. Connect the output of a bass guitar to this jack. The main unit's power will be switched ON when a plug is inserted into this jack. * Before connecting or disconnecting the plug, make sure you turn down the volume on the amplifier, etc. that is connected to the OUTPUT jack e. w Power Indicator When the Power is ON, the indicator will light. e Output Jack (OUTPUT) The output jack for the main unit. Connect this jack to a bass amplifier, mixer, etc. r Level Control (LEVEL) This is used to control the output level of the main unit. t Q Control (Q) This is used to select the equalizer's variable curve. FLAT: All frequencies will be flat. y Frequency Control (FREQUENCY) Never dispose of used batteries by burning them. Also make sure to keep batteries away from children. This is used to set the equalizer's center frequency. * Turning the knob when FLAT is selected with the Q Control will produce no effect. I Using batteries The NE-1 is not supplied with a battery. [. . . ] Remove the old battery and replace it with a new battery (S006P:6F22, 9V battery) taking note of the polarity. Replace the battery compartment cover and tighten the fixing screw. Fixing screw Battery compartment cover S-006P:6F22, 9V battery "DEEP-4" is Nathan's Favorite Setting. I Specifications Input Impedance Output Impedance Frequency Range, Level DEEP SHALLOW Jacks : 470 k : 1 k (VR max. ) 4. 7 k (VR center) + ­ : 200 Hz ­ 10 kHz, ­20dB : 150 Hz ­ 6 kHz, ­10dB : INPUT jack (6. 3 ø monaural) OUTPUT jack (6. 3 ø monaural) Power : S-006P (6F22) 9V battery x 1 (sold separately) Power consumption : Less than 2mA Dimensions (WxHxD) : 140 x 60 x 88 mm (5-1/2" x 2-3/8" x 3-7/16") Weight (without batteries) : 380 g (13. 4 oz) * Design and specifications are subject to change without notice. [. . . ]