User manual YAMAHA NS-6HX

[. . . ] A vessel with water in it If the vessel falls by vibrations and water spills, it may cause damage to the speakers, and/or you may get an electric shock. Do not place the speakers where foreign objects such as water drips might fall. It might cause a fire, damage to the speakers, and/or personal injury. [. . . ] Set up the speakers on the basis of your listening position by following the owner's manual supplied with your amplifier. 2 1 Procedure: 1 Turn the nut close to the tip of the spike. 2 Screw the spikes into the hole of the stands. 3 Place the speaker in the desired location in an upright position and adjust the length of the spike to match the depth of the carpet. 4 When adjustment is finished, turn the nut up to the base of the stand firmly. Notes G The tips of the spikes may scratch or otherwise damage the flooring. Please be careful when positioning the speakers. G If force is applied to the side of the speaker, it may fall and damage the speaker or cause personal injury. Please be careful. NS-6HX Subwoofer NS-6HX Effect R Center Effect L Note These speakers feature a magnetically shielded design, but there is still a chance that placing them too close to a TV set might impair picture color. Should this happen, move the speakers away from the TV set. E-2 English CONNECTIONS TO YOUR AMPLIFIER This speaker system is capable of standard connections and bi-wired connections. Before making connections, make sure that the amplifier is switched off. <Standard connections> Leave the short bars in place when connecting. Short bar Loosen Tighten ICONNECTIONS · Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. · Connect the (+) terminals on the amplifier (or receiver) and the speakers using one side of the cable. Connect the (­) terminals on both components using the other side of the cable. · Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, ­). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. [Remove the insulation coating at the extremity of each speaker cable by twisting the coating off. ] 3 Tighten the knob and secure the cable. [. . . ] Spike x 4 Nut x 4 Note When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. G Specifications subject to change without notice due to product improvements. G Care should be taken not to exceed the input power values noted above. E-5 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE. , BUENA PARK, CALIF. 135 MILNER AVE. , SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G. m. b. H. [. . . ]