User manual YAMAHA NTX1200R

[. . . ] Please record the serial number of this unit in the space below. Model: Serial No. : The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. 12 13 14 15 1 2 3 4 5 6 Read Instructions ­ All the safety and operating instructions should be read before the unit is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] Finalization is the final process in recording a CD-R disc that makes it playable on standard CD players. (CD-RW discs can only be played back on a CD-RW compatible player, even if finalization is performed. ) Refer to page 20 for more information on finalization. REC MODE NATURAL SOUND CD RECORDER NTX1200R COAXIAL 4 5 6 REC INPUT INPUT OPTICAL ANALOG Adjust the recording level as described on page 17. · The recording level of digital and analog sources can be adjusted. · Start playing the source to set the recording level. When the recording level is set, stop playback of the source component. · The recording level cannot be changed when the CD DIRECT function is on. Ensure that the source is in pause or stop mode, as synchronized recording cannot be started if the source is playing. · The AUTO and SYNC indicators light in the display. CD-R CD 32 44 . 48 1 REC LEVEL DIGITAL/ANALOG TRACK NO. EFFECT REC MODE CD DIRECT REC MUTE REC MIN MAX PROG RNDM REPEAT SF TOTAL REMAIN SINGLE ALL AUTO EFFECT REC SYNC L dB ­00 ­60 R ­30 ­10 ­6 ­ 4 ­ 2 ­1 0 OVER TOC POWER FINALIZE ERASE DISPLAY OPEN/CLOSE / / / PHONES LEVEL 0 10 7 8 & REC MODE TRACK NO. OPEN/ WRITE DIMMER DISPLAY CLOSE REC MODE EFFECT REPEAT RANDOM CLEAR 1 2 3 PROG INDEX +10 4 5 6 7 8 9 0 REC FINALIZE ERASE REC REC MUTE SEARCH STOP PAUSE SKIP PLAY STOP & 1 2 Load a CD-R or CD-RW disc containing space for recording. · To ensure proper recording, make sure that you have more than enough space on the disc. · The REC indicator blinks while blank space is being recorded. · You can create blank spaces longer than 4 seconds by pressing and holding REC MUTE. The unit is put in the record pause mode when the button is released. · REC MUTE cannot be used when the record pause mode is activated from the stop mode. When you are finished recording, follow the finalization procedure described on page 20. 1 2 Load a CD-R or CD-RW disc containing space for recording. · To ensure proper recording, make sure that you have more than enough space on the disc. · This unit enters record pause mode. CD-R CD 32 44 . 48 1 PROG RNDM REPEAT SF TOTAL REMAIN SINGLE ALL AUTO EFFECT REC SYNC X2 X4 L dB ­00 ­60 R ­30 ­10 ­6 ­ 4 ­ 2 ­1 0 OVER TOC 3 Set INPUT on the front panel to the appropriate input to be used for recording. E-16 RECORDING FUNCTIONS Setting the recording levels INPUT NATURAL SOUND CD RECORDER NTX1200R COAXIAL Setting the analog recording level To select the analog signal, set INPUT to ANALOG. Turn REC LEVEL DIGITAL/ANALOG during record or record pause mode to adjust the analog recording level. For best results, play the loudest passage of the source to be recorded and watch the recording level meter in the display. Adjust REC LEVEL DIGITAL/ANALOG so that the highest peak causes the 0 dB level indicators to flicker. [. . . ] and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . and Europe models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]