User manual YAMAHA NUAGE WORKGROUP MANAGER OPERATION MANUAL

[. . . ] 9 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 NUAGE Workgroup Manager Operation Manual 2 Information Information • The NUAGE Workgroup Manager application and this manual are copyright of Yamaha Corporation. • Copying of the NUAGE Workgroup Manager application or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of Yamaha Corporation. • Yamaha Corporation makes no representations or warranties with regard to the use of the NUAGE Workgroup Manager application and this manual and cannot be held responsible for the results of usage thereof. • Screen displays as illustrated in this manual are for instructional purposes and may appear somewhat different from those on your device. [. . . ] Click Setup to open the Setup window (page 9). 4. Set the data to be transmitted from the RS232C ports on the Nuage Fader and the Nuage Master to the KVM switches when the buttons from the DAW Select section are pressed, and also set the corresponding transmission parameters. In the DAW A field, for example, you should enter the ASCII message to be sent to the KVM switches to switch them to DAW A when the DAW A button is pressed. For information on these messages and RS232C parameter settings, refer to the manuals that came with the KVM switches. NUAGE Workgroup Manager Operation Manual 6 Descriptions of Windows Descriptions of Windows NUAGE Workgroup Manager comprises the following four windows. • Main window (page 7) • Property window (page 8) • Setup window (page 9) • About window (page 9) The Main window is displayed when you open NUAGE Workgroup Manager. The Property window (page 8), the Setup window (page 7), and the About window (page 7) can be opened by clicking Property, Setup, and About, respectively, on the Main window. Component names and functions 1 2 34 5 9 ) 6 7 8 !@ Main window # 1 Open Click to open a file containing a Workgroup configuration. 2 Save Click to save the Workgroup configuration in file format. 3 Setup Click to open the Setup window (page 9). 4 Manual Click to open the NUAGE Workgroup Manager manual (this manual). 5 About Click to open the About window (page 9). Overview This Main window is used to manage Workgroups. The devices and/or DAW applications currently contained in the Workgroup are shown in the Workgroup area in the upper half of the window. Other devices and/or DAW applications on the network and those contained in other Workgroups are displayed in the Device/DAW List area in the lower half. Devices and DAW applications can be added to and removed from the Workgroup using the buttons between these two areas. Each Workgroup can contain the following: • Up to three DAW applications (only one instance of Pro Tools (Mac only) is supported) • Up to three Nuage Faders • One Nuage Master • Up to eight Nuage I/Os IO 1 to 8 Nuage I/O DAW A to C Fader 1 to 3 Master DAW application Nuage Fader Nuage Master 6 Active These indicators display the connection status of the corresponding device or DAW application. They light up when communication has been established and viceversa. 7 Assign These fields display the Workgroup assignment of the corresponding device or DAW application. Assign name The current assignment NUAGE Workgroup Manager Operation Manual 7 Descriptions of Windows 8 Name Property window These fields display the name of the corresponding device or DAW application. The name itself can be changed by clicking Property. It should be noted that the names of the devices and DAW applications in the Device/DAW List area cannot be changed. If you select a device or DAW application in the Workgroup area and click the Name field, you can change its assignment. 9 Identify These buttons can be used to identify the corresponding device or DAW application. When you click Identify, the lamp on the corresponding device or DAW application will respond by flashing for a few seconds. It should be noted that this action is not possible when the Active indicator for the device or DAW application is turned off. It is also not possible for Pro Tools. ) Property Overview The Property window displays information about the selected device or DAW application. To open this window, click Property (page 8) on the Main window. Component names and functions Click to open the Property window (page 8). ! 1 2 4 5 3 Click to add the device or DAW application selected in the Device/DAW list to the Workgroup and move it to the Workgroup area. @  Click to remove the device or DAW application selected in the Workgroup area from the Workgroup. # Unavailable Workgroup Member 1 Name This area displays devices and DAW applications not added to the current Workgroup. [. . . ] Do you wish to remove the device or DAW application from the Workgroup?This DAW application cannot be assigned as DAW A. Do you wish to select an update file? XXX already exists. (XXX is a file name. ) Failed to write file. [. . . ]