User manual YAMAHA PC1000

[. . . ] Doing so may result in injury or damage/deterioration to the product. If this symbol is ignored and the equipment is used improperly, there is a danger or injury to persons handling the equipment, and material damage could occur. Do not step on or place heavy objects on the product. Do not use or keep the product in places with extremely high temperature (places in direct sunlight, close to a heater, in a closed car, etc. [. . . ] Doing so may result in deformation, discoloration, damage or deterioration. When cleaning the product, do not use benzine, thinner or alcohol as it may result in discoloration or deformation. Please wipe with a soft cloth or a damp cloth that has been wrung out thoroughly. If the product is soiled or sticky, use a neutral detergent on a cloth then wipe with a damp cloth that has been wrung out thoroughly to remove any remaining detergent. Also pay close attention so as not to let the water and detergent come into contact with the cushions used in the product; doing so may result in deterioration. Make sure you hold onto the plug, not the cable, when connecting or disconnecting the cable. Also, never place any heavy or sharp objects on the cable. Applying excessive force to the cable may result in damage to the cable, such as the wires being severed, etc. * To customers who purchased a Pads Set, please refer to the attached "Accessories List" sheet included with the Pads Set when confirming package contents. Z PCY65 main unit x 1, b Stopper x 1, m Stereo phone cable x 1, , Owner's Manual (this sheet) x 1 x PCY65S main unit* x 1, b Stopper x 1, m Stereo phone cable x 1, , Owner's Manual (this sheet) x 1 c PCY135 main unit* x 1, b Stopper x 1, n Felt washer x 1, m Stereo phone cable x 1, , Owner's Manual (this sheet) x 1 v PCY155 main unit* x 1, b Stopper x 1, n Felt washer x 1, m Stereo phone cable x 1, , Owner's Manual (this sheet) x 1 * Switches are embedded in the edge section on the PCY65S and edge and cup sections on the PCY135 and 155. Si ce produit est utilisé avec le système de racks ou le support de cymbales, ne placez pas le rack ou le support sur une surface inclinée ou instable ou sur des marches. NOTE: Make sure a stereo phone cable is used when connecting the PCY65S/135/155 to the module. The switch functions described above will not function with a mono phone cable. (Only the voice assigned to the pad can be produced. ) Since the PCY65 does not incorporate a switch, use of a mono phone cable is allowed. If the following trouble occurs when the PCY series pad is used, please check the following points before asking your dealer for assistance. Is the pad connected to the correct input number of the DTX Series Drum Trigger Module using the supplied stereo phone cable? (See "Pad-to-Input Matching Chart" above. ) When a pad with a switch(es) is connected with a mono phone cable, the voices assigned to the edge and cup sections are not produced. Increase the output level using the level adjustment knob on the pad. Hitting the pad once produces multiple sounds (double triggering) Decrease the output level using the level adjustment knob on the pad. Too high of a level adjustment setting causes the drum module to produce multiple sounds, because the large signal produced by the high settings sustains for too long of a time. [. . . ] (See "Output Level Adjustment" above. ) Also, please refer to the Owner's Manual that came with your DTX Series Drum Trigger Module for more information regarding the problems described above and any other problems that you may be experiencing. If a solution can not be found to the problem after consulting the manuals, please contact the dealer from whom you purchased the product. 5 (H) mm Weight: 620g Sensor System: [PCY65] Trigger sensor (piezo) x 1 [PCY65S] Trigger sensor (piezo) x 1, switch x 1 (edge) Output jack: [PCY65] Standard mono phone jack [PCY65S] Standard stereo phone jack * Specifications are subject to change without notice. [. . . ]