User manual YAMAHA PCS-500

[. . . ] Five built-in channels of amplification on this model mean that no additional amplifiers are required to enjoy advanced digital sound field processing. Rather than tell you about the wonders of digital sound field processing, however, let's get right down to the business of setting up the system and trying out its many capabilities. Please read this operation manual carefully and store it in a safe place for later reference. English CONTENTS CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] * If the TUNING button is not pressed, in a while, the automatic preset tuning begins automatically toward higher frequencies. The automatic preset tuning begins from the frequency currently displayed. Received stations are programmed to A1, A2 . . . * If more than 8 stations are received, they are also programmed to the preset station numbers on other groups (B, C, D and E) in that order. 41 BASIC OPERATION Exchanging preset stations You can exchange the places of two preset stations with each other as shown below. NATURAL SOUND AV RECEIVER RX V795aRDS CINEMA DSP VOLUME INPUT SELECTOR 20 l6 l2 28 8 PRESET ROOM 2 AM FM STANDBY/ON TAPE 2 MONITOR MEMORY AUTO TUNING SPEAKERS SPEAKERS B ROOM 2 CONTROL A MHz STEREO 0 20 40 60 l00 kHz DIGITAL ENHANCED 70 mm NORMAL WIDEPHANTOM PS PTY RT CT dB ms 40 4 DIGITAL DSP PRO LOGIC AUTO SLEEP PCM AC--3 PTY HOLD EON NEWS INFO AFFAIRS SPORT TAPE/MD MON /EXT. DECODER 60 2 0 A/B/C/D/E 1 2 3 4 5 6 7 8 MEMORY EDIT TUNING MODE ­dB FM/AM DOWN TUNING UP INPUT MODE MAN'L/AUTO FM BASS 0 l 2 3 4 5 5 2 3 4 5 5 TREBLE 0 l l 2 3 4 BALANCE 0 l l 2 3 4 L5 2 3 4 5R AUTO/MAN'L MONO RDS MODE/ FREQ EON SET MENU PHONES SPEAKERS A B BASS TONE EXTENSION BYPASS 2 3 VIDEO AUX EFFECT LEVEL l PTY SEEK PROGRAM ON OFF ON OFF 4 MODE START S VIDEO VIDEO L AUDIO R 2, 4 Example) If you want to exchange the preset stations on E1 and A5 with each other. 1 2 Recall the preset station on E1 (by following the method of "To recall a preset station" on page 40). 4 EDIT EDIT MEMORY Flashes. 3 Recall the preset station on A5 by following the same method with step 1. DVD/LD TV/DBS V-AUX VCR MEMORY 0 20 100 CD TUNER PHONO MEMORY Shows the exchange of stations is completed. Flashes. 42 BASIC OPERATION English In areas where RDS broadcasts cannot be received, the RDS broadcast functions do not operate. (Skip the procedures from pages 43 to 47. ) Receiving RDS stations RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various information, such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc. RDS function is carried out among the network stations. * This unit utilizes PI, PS, PTY, RT, CT and EON to receive RDS broadcast stations. Displaying RDS data DVD/LD TV/DBS V-AUX STEREO PS PTY RT CT EON SPORT AUTO 0 20 100 CD TUNER PHONO VCR The following five modes are available in this unit for displaying RDS data. PS (Program Service name) mode: Displays the name of the RDS station now being received instead of the frequency. CT (Clock Time) mode: Displays the current time. This signal comes from the RDS station now being received. PTY (Program Type) mode: Displays the type of the program on the RDS station now being received. * When an RDS station is received, do not press the RDS MODE/FREQ button until one or more names of RDS modes light up on the display. If the button is pressed before one or more names light up on the display, the mode cannot be changed. This is because the unit has not received all of the RDS data on the station yet. * If no name of RDS mode lights up on the display, the mode cannot be changed. PS mode The name of the station being received is displayed. If the station does not employ the PS data service, this mode will not be selected. PTY mode The type of the program currently broadcasted on the station is displayed. If the station does not employ the PTY data service, this mode will not be selected. (You can make this unit search for a station which is broadcasting a program of your desired program type. For details, refer to the next page. ) RDS MODE/ FREQ RT mode Information about the program currently broadcasted on the station is displayed. Information is displayed by a maximum of 64 Roman Alphabets including umlaut sign. If other characters are used on the RT data, they are displayed with under-bars. If the station does not employ the RT data service, this mode will not be selected. CT mode Current time is displayed in the following form. [. . . ] and Singapore models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230V/50 Hz [Australia model] . . . . . . . . . . . . . . . . . . AC 240V/50 Hz [China and General models] . . . . . . . . . . . . . . . . . . AC 110/120/220/240V, 50/60 Hz Power Consumption [U. S. A. [. . . ]