User manual YAMAHA PDM-1

[. . . ] Follow all warnings and instructions marked on this monitor. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: · TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. · THE MONITOR SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THE MONITOR. · There are no user serviceable parts inside the monitor. [. . . ] This features the spacious sound effects of a stadium. This will automatically adjust volume so each channel and input has the same average volume level. The original factory settings for the items of this Menu page can be restored by pressing the OK button. Audio Mode Movie Music Speech Favorite Treble Bass Balance Suppresses treble. Suppresses right-side sound. Enhances treble. Suppresses left-side sound. SRS TruBass Matrix Surround Perfect Volume Reset Off Low Middle High Off Off On On (Selects the Reset mode) TIMER MENU Picture Audio Timer Function Setup Language Select OK Set Timer Off Timer On Timer Select : 30Min. : --:-Return OK MENU Adjust Selected characters Setup hint Off Timer --Min. 90Min. --(:--) hours (- - : )- minutes This function automatically sets the power to standby status when the indicated time period has elapsed. This automatically sets the power from standby to ON when the indicated time period has elapsed. Input the required time by SELECT buttons on the remote control. On Timer 19 OPERATING INSTRUCTIONS (continued) FUNCTION MENU Picture Audio Timer Function Setup Language Select OK Set Function Screen Saver Screen Wipe Black Side Panel Video Power Save Freeze Mode Default Zoom Reset Select Set Off On 60Min. Off Off Split Panoramic Reset Return OK MENU Function Panel Life Mode Display ID Number Inverse Standby White Gamma Reset Select Set Normal Off 1 On 60Min. Off 2. 2 Reset Return Selected characters Setup hint Screen Saver Off 60Min. 5Min. If time is set for this item, the screen changes into a white pattern when the monitor enters power save mode, and continues for the period of setting time. Normally set to 2. 2. Inverse On 60Min. Standby White Off 15Min. 2. 2 2. 8 Gamma 20 OPERATING INSTRUCTIONS (continued) SETUP MENU MENU Picture Audio Timer Function Setup Language Select OK Set OK ENGLISH Setup Auto Adjust Horizontal Position Vertical Position Horizontal Clock Clock Phase Reset Select Return Adjust 0 + 31 ­ 20 10 Reset Exit OK Horizontal Position Next / Prev Adjust 0 Return Setup Auto Adjust Horizontal Position Vertical Position Horizontal Clock Clock Phase Reset Select Return Adjust 0 + 31 ­ 20 10 Reset Exit OK Clock Phase Next / Prev 10 Adjust Return Setup Input Level Frequency Display WVGA Type Vertical Filter Frequency Mode RGB1 RGB2 Select Set 0. 7V Off Off On Movie DVI-PC RGB Return Selected characters (Menu) Setup hint (Adjust) Press the OK button to start automatic regulation. Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are adjusted automatically. It is not available (grayed out) for RGB1. ) Adjust the vertical display position. It is not available (grayed out) for RGB1. ) Auto Adjust* Moves the horizontal position to left. Horizontal Position Vertical Position Moves down the vertical position. Moves up the vertical position. Horizontal Clock Reduces the dot clock frequency (shrinks the right side). Increases the dot clock frequency (expands the right side). Adjust for maximum character clarity. It is not available (grayed out) for RGB1. ) Clock Phase Reset Input Level Frequency Display WVGA Type Vertical Filter Frequency Mode RGB1 RGB2 Slows the dot clock phase (shifts slightly to left). Advances the dot clock phase Adjust for clear character visibility. It is not available (grayed out) for RGB1. ) (Selects the Reset mode) The original factory settings for the items of this Menu page can be restored by pressing the OK button. (This is effective only for RGB2. ) Normally set to 0. 7 V. If white is found to spread across the screen, set to 1. 0 V. (This is effective only for RGB2. ) Set this to Off if the frequency information of the Input Signal Screen Display is not required. [. . . ] * We recommend that you reduse "Contrast" and "Brightness" levels as much as possible. Français Rétention d'image La rétention peut être un problème pour les écrans Plasma, néanmoins si vous suivez les simples instructions suivantes, vous pourrez profiter de votre écrans pendant de longues années. YAMAHA a pourvu ses écrans moniteurs plasma de fonctions permettant de réduire la rétention d'image. Veuillez s'il vous plaît vérifier dans le mode d'emploi de ce modèle comment utiliser ces fonctions. * Assurez vous que I'économiseur d'écran est bien activé. [. . . ]