User manual YAMAHA PLASTIC RECORDERS

[. . . ] When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use "household" type batteries. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. [. . . ] Use the [SEL<]/[SEL>] buttons to move the flashing cursor to the song number, then use the [VALUE­]/[VALUE+] buttons to select the song. The mute function can be used during song playback. The song volume is adjusted with the ACCOMP VOL knob. Use both the ACCOMP VOL knob and the POWER/VOL knob (overall volume of song and pads) to adjust the balance between the song and your drum part. Make sure the Tempo value in the display is flashing, then use the [VALUE­]/[VALUE+] buttons to set the desired tempo (q=30-300). * When a song is switched, the drum kit also changes to a kit that is set for that song. When the [>/I] button is pressed, the song will start playback from the beginning. The [SONG] lamp in the button will blink on the first beat of each measure. Play Along with the Click Voice The song will stop when it reaches the end. You can stop the song during playback by pressing the [>/I] button. With the drum part muted, it may be a little difficult to keep time. This function is convenient when you want to practice individual drum parts. Press the [UTIL] button, then press the [PAGEt] button to enter this display. Mute (Does not produce sound) Produces sound Use the [SEL<]/[SEL>] buttons to select the drum instrument (K: Bass Drum, S: Snare Drum, C: Cymbal, M: others) you want to mute, then press the [VALUE+] button to change the speaker icon (®) to the mute icon (m). Next, let's try recording your performance to the PLASTIC RECORDERS's sequencer. With song data you record you can switch drum kits, change the tempo and playback in the same way as preset songs. Recording can be done in any of the user songs (No. Recording can be done one track at a time. The song records (memory) data that precisely relates to when and how each pad was hit, and stores that information. MIDI data from the MIDI IN/TO HOST jacks can be recorded simultaneously. Sequence data can be freely used to change the tempo, select the voice or drum kit during playback. Program Change, Bank Select] * When there is data in the other track, the number of measures in that track will determine the length of the song. [. . . ] When 2 pads (drums) are played only 1 sound is heard. Self-Rejection, Rejection]) G Are both pads assigned to the same group in the Drum Kit Voice Edit mode's [2-3. Gain, Minimum Velocity]) G Are you using a proper velocity curve?Velocity Curve]) G Are you using a sensor made by a manufacturer other than Yamaha? [. . . ]