User manual YAMAHA PMC1E

[. . . ] You can link its parameters for the L and R channels. You can control two monaural channels independently. [. . . ] You can control two monaural channels independently. You can also control some parameters simultaneously by making a stereo link. What is VCM (Virtual Circuitry Modeling)? VCM is a technology that enables you to model element levels in analog circuits (such as resistors and capacitors). This technology was developed by an engineering group led by Mr. Kunimoto, an engineer who developed the first physical modeling synthesizers, VL1 and VP1. Compressor 260/260S utilizes VCM technology. Special Notices · Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. · The software and this Owner's Manual are exclusive copyrights of Yamaha Corporation. The Compressor 260/260S window enables you to edit Compressor 260/260S specific parameters, and the Generic Editor window enables you to edit parameters common to Compressor 260/260S and other Effects. Refer to the Studio Manager Owner's Manual for your console for more information on the Generic Editor window. Studio Manager Generic Editor Window 2 Part Names and Functions 1 6 5 2 3 4 7 8 9 Studio Manager Compressor 260 Window 8 9 1 4 1 4 7 5 7 5 2 3 2 3 6 Console screen (This is a DM2000 screen. ) In the following section: Functions marked with Studio Manager are available in Studio Manager. Functions marked with Console are available on the console. 1 [THRESHOLD]/[THRE. (1&2)] controls Adjust the Compressor's threshold. n The range is from ­60. 0 through 0. 0 dB. Studio Manager Console 2 [ATTACK]/[ATTACK (1&2)] controls Adjust the Compressor's attack time. n The range is from 0. 010 through 80. 00 ms. Studio Manager Console 3 [RELEASE]/[RELEASE (1&2)] controls Adjust the Compressor's release time. n The range is from 6. 2 through 999. 0 ms. Studio Manager Console 3 1 6 1 4 1 4 5 2 3 4 7 8 9 7 5 7 5 2 3 2 3 6 4 [RATIO]/[RATIO (1&2)] controls Adjust the Compressor's ratio. n The range is from 1. 0 through . Studio Manager Console 5 [KNEE] button/[KNEE (1&2) controls Adjust the Compressor's knee. n The options are Soft (LED turns off), Medium ( Studio Manager Console ), and Hard ( ). 6 [LINK ON] button/[ST LINK] control Studio Manager Console Only Compressor 260 features this button and control. When you turn this parameter on, the LED lights up red, and CH1 and CH2 are linked as a stereo pair. At this time, the Threshold, Knee, Attack, Release, and Ratio parameters for CH1 and CH2 are linked, but not the Output Gain parameter. 7 [OUTPUT] control Adjusts the output gain. Studio Manager Console n The range is from ­20. 0 through 40. 0 dB. 4 8 9 8 9 8 GR meter Studio Manager Console Indicates the amount of gain reduction applied by the Compressor. 9 [OUT] meter/Level meter Studio Manager Console Studio Manager displays the Effects output level. [. . . ] When you turn this parameter on, the LED lights up red, and CH1 and CH2 are linked as a stereo pair. At this time, the Threshold, Knee, Attack, Release, and Ratio parameters for CH1 and CH2 are linked, but not the Output Gain parameter. 7 [OUTPUT] control Adjusts the output gain. Studio Manager Console n The range is from ­20. 0 through 40. 0 dB. 4 8 9 8 9 8 GR meter Studio Manager Console Indicates the amount of gain reduction applied by the Compressor. 9 [OUT] meter/Level meter Studio Manager Console Studio Manager displays the Effects output level. [. . . ]