User manual YAMAHA PSR-293

[. . . ] This product may also use "household" type batteries. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Mismatches or incorrect installation may result in overheating and battery case rupture. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. [. . . ] A default file name will automatically be created. Cursor 6 Press the [EXECUTE] button. The dis To Overwrite an Existing File If you want to overwrite a file that already exists on the USB flash memory device, use the dial or the [+/YES] and [-/NO] buttons to select the file, then skip ahead to step 6. NOTE · If the USB flash memory has been write-protected, an appropriate message will appear in the display and you will not be able to execute the operation. · If there is not enough capacity left on the USB flash memory device to save the data, an appropriate message will appear in the display and you will not be able to save the data. Erase unwanted files from the USB flash memory device to make more memory available (page 79), or use a different USB device. · Refer to the "Messages" list on page 96 for other possible errors that might prevent you from completing the operation. play prompts you for confirmation. You can cancel the save operation at this point by pressing the [-/NO] button. 7 Press the [EXECUTE] button again, or the [+/YES] button, and the save operation will begin. The user song will be stored to the USER FILE folder in the USB flash memory device. CAUTION · Once the save-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB flash memory device during this operation. 4 Press the [EXECUTE] button. A cursor will appear below the first character in the file name. 8 Press the [EXIT] button to return to the MAIN display. NOTE · If an existing filename is specified the display prompts you for confirmation. Press [EXECUTE] or [+/YES] if it is OK to overwrite the file, or [-/NO] to cancel. · The amount of time it will take to perform the save operation depends on the particular USB flash memory device you are using. 5 Change the file name as necessary. · The [1] button moves the cursor to the left, and the [2] button moves it to the right. · Use the dial to select a character for the current cursor location. · The [8] button deletes the character at the cursor location. 76 PSR-293 Owner's Manual Using USB Flash Memory Convert a User Song to SMF Format and Save This operation converts a user song (song numbers 001­005) to SMF Format 0 and saves the file to USB flash memory. What is SMF (Standard MIDI File)?The display prompts you for confirmation. You can cancel the delete operation at this point by pressing the [-/NO] button. 2 Press the FILE MENU [MENU] button. 3 Use the CATEGORY [ ] and [ ] buttons to locate the Delete item. r f 6 Press the [EXECUTE] button again, or CAUTION the [+/YES] button, and the delete operation will begin. · Once the delete-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB flash memory during this operation. 7 A message appears in the display indi- cating that the operation is complete. Press the [EXIT] button to return to the MAIN display. NOTE · If the USB flash memory has been write-protected, an appropriate message will appear in the display and you will not be able to execute the operation. Playing Songs Saved to USB Flash Memory 1 Make sure that the USB flash memory device containing the song you want to play has been properly connected to the instrument's USB TO DEVICE terminal, and that the "CONNECT" is shown in the MAIN display. 3 Use the dial to select the song you want to play. > 4 Press the [>/] button. 2 Press the [USB] button. PSR-293 Owner's Manual 79 erenc ef R Connectors q w q USB TO HOST terminal This terminal allows direct connection to a personal computer. Refer to "Connecting a Personal Computer" on page 82 for more information. Connection to a USB Storage Device By connecting the instrument to a USB storage device, you can save data you've created, as well as read or play the data from the connected device. Compatible USB storage devices A USB storage device, such as a floppy disk drive and flash memory can be connected to the USB TO DEVICE terminal. Other USB devices such as a computer keyboard or mouse cannot be used. Before purchasing USB storage devices, please consult your Yamaha dealer, or an authorized Yamaha distributor (see list at end of the Owner's Manual) for advice. CAUTION · Avoid frequently turning the power on/off to the USB storage device, or connecting/disconnecting the cable too often. Doing so may result in the operation of the instrument "freezing" or hanging up. While the instrument is accessing data (such as in the Save and Delete operations), do NOT unplug the USB cable, do NOT remove the media from the device, and do NOT turn the power off to either device. Doing so may corrupt the data on either or both devices. e Connections w USB TO DEVICE terminal This terminal allows connection to USB storage devices. [. . . ] 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. [. . . ]