User manual YAMAHA PSR-48

[. . . ] The use of an extension cord is not recommended!IF you must use an extension cord, the minimum wire size for a 25' cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. [. . . ] When the chord changes from a minor to a major chord, the minor third and flatted sixth intervals are raised by a semitone. Use this for chord channels of Sections which respond only to major/minor chords, such as Intros and Endings. In addition to the Harmonic Minor transposition above, augmented and diminished chords affect the 5th note of the Source pattern. When the played chord changes from a major to a minor chord, this table lowers the third, sixth and seventh intervals in the scale by a semitone. When the chord changes from a minor to a major chord, the minor third, flatted sixth and flatted seventh intervals are raised by a semitone. Use this for chord channels of Sections which respond only to a Major/minor chord such as Intros and Endings. In addition to the Natural Minor transposition above, augmented and diminished chords affect the 5th note of the Source pattern. When the played chord changes from a major to a minor chord, this table lowers the third and seventh intervals in the scale by a semitone. When the chord changes from a minor to a major chord, the minor third and flatted seventh intervals are raised by a semitone. Use this for chord channels of Sections which respond only to a Major/minor chord such as Intros and Endings. In addition to the Dorian transposition above, augmented and diminished chords affect the 5th note of the Source pattern. MELODY CHORD MELODIC MINOR MELODIC MINOR 5th HARMONIC MINOR Using, Creating and Editing the Auto Accompaniment Styles HARMONIC MINOR 5th NATURAL MINOR NATURAL MINOR 5th DORIAN DORIAN 5th NTT BASS ON/OFF The channels for which this is set to ON will be played back by the bass root note, when the on-bass chord is recognized by the instrument. 124 PSR-3000/1500 Owner's Manual Style Creator HIGH KEY This sets the highest key (upper octave limit) of the note transposition for the chord root change. If the Repeat parameter is on for the selected pad, playback of the corresponding pad will continue until the MULTI PAD [STOP] button is pressed. If the Repeat parameter is off for the selected pad, playback will end automatically as soon as the end of the phrase is reached. When you press the Multi Pads of which the Repeat is turned on during Song or Style playback, playback will start and repeat in sync with the beat. Turn Chord Match of each pad On or Off by using the [5] [8] buttons. If the Chord Match parameter is on for the selected pad, the corresponding pad is played back according to the chord specified in the chord section of the keyboard generated by turning [ACMP] on, or specified in the LEFT voice section of the keyboard generated by turning [LEFT] on (when turning the [ACMP] off). 11 12 13 Press the [D] button, then enter a name for each Multi Pad by (page 128). Press the [I] button, then save the Multi Pad data as a Bank containg a set of four Pads to the USER or CARD (SmartMedia) drive (page 64). The Multi Pads Multi Pad Step Recording (EDIT) The explanations here apply to when you call up the EDIT page in step #4 described above. The EDIT page indicates the Event list that lets you record notes with absolutely precise timing. This Step Recording procedure is essentially the same as that for Song Recording (pages 145­155), with the exception of the points listed below: · There is no menu for switching channels, since Multi Pads contain data for only a single channel. · In the Multi Pad Creator, only the channel events and System Exclusive messages can be entered. Chord and Lyrics events are not available. You can switch between the two types of Event Lists by pressing the [F] button. PSR-3000/1500 Owner's Manual 127 Multi Pad Editing (Multi Pad Creator) Multi Pad Editing (Multi Pad Creator) 1 Press the [MULTI PAD SELECT] button to call up the Multi Pad Bank selection display, then select a Bank to be edited on the USER drive. 2 The Multi Pads Press the [8] button to call up the [MULTI PAD EDIT] display, then select a Pad to be edited by pressing any of the [A], [B], [F], and [G] buttons. The number above the Pad name corresponds to the MULTI PAD [1]­[4] buttons. 3 Edit each of the Multi Pads as desired. [. . . ] Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. [. . . ]