User manual YAMAHA RS70-85 ASSEMBLY MANUAL

[. . . ] We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small nonrechargable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. [. . . ] The three track types available in the PATTERN CHAIN mode (PATT, SCENE, and BPM) as well as the tracks included in the currently selected pattern (1 ~ 16) are shown. : The track is muted (no sound will be produced by this track). (TR01 ~ TR16) : The track is empty (TR01 ~ TR16). : The track is empty (PATTERN, SCENE/MUTE, BPM). [Track selection procedure] Displays the currently-playing style and section. Also allow the style and section to be temporarily changed. If further style or section changes are record in the chain, however, those changes will take priority. The STYLE parameter can be set to OFF to create breaks (blank sections) in the chain (the chain continues playing). When STYLE is set to END, playback will stop at that point. Press [F2] to move the cursor and use [Knob 2] to set the section. NOTE · Refer to "Chapter 1: Basics", page 51, for more information on styles and sections. · Sections can be changed by pressing the [KEYBOARD] button so that its indicator goes off, and then pressing the black key on the keyboard corresponding to the desired section. [Knob 3], [SHIFT]+[F3] Numeric Keypad [Settings] 001 ~ 999 Displays the current measure number. If further style or section changes are record in the chain, however, those changes will take priority. The STYLE parameter can be set to OFF to create breaks (blank sections) in the chain (the chain continues playing). When STYLE is set to END, playback will stop at that point. Press [F2] to move the cursor and use [Knob 2] to set the section. NOTE 2. Use [Knob 1] (CHAIN) to select the chain number to be recorded. 3. Press [REC] to engage the record standby mode. Use [Knob 1] (REC TRACK) to select the track to be recorded. 5. If the BPM track is selected for recording, use [Knob 3] (REC TYPE) to select the REPLACE record mode. 6. If the pattern track is to be recorded in real time, use [Knob 2] (STYLE) and [F2] [Knob 2] (SECTION) to set the style and section for the first measure. 8. Press [PLAY] so that its indicator flashes, then start recording · Refer to "Chapter 1: Basics", page 59, for more information on styles and sections. · Sections can be changed by pressing the [KEYBOARD] button so that its indicator goes out, and then pressing the black key on the keyboard corresponding to the desired section. [. . . ] De C. V. , Departamento de ventas Javier Rojo Gomez No. 1149, Col. Tel: 686-00-33 KOREA Yamaha Music Korea Ltd. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0661 SWEDEN Yamaha Scandinavia AB J. Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. [. . . ]